{"title":"Forbidden","description":null,"products":[{"product_id":"forbidden-handlebar-riser-9-raw-825-05000","title":"Forbidden Handlebar Riser - 9\" RAW","description":"\u003cp\u003eForbidden Motorcycles 9\" handlebar riser in raw aluminum, designed for MX-style bars with 1-1\/8\" diameter. One-piece top clamp machined from T6061 aluminum provides extreme stability, and pre-drilled internal wire channels allow for clean cable and harness routing.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping diameter for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eT6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp design\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eRaw finish with machined FM logo\u003c\/li\u003e\n  \u003cli\u003e9\" rise height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290244\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamping Diameter:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6.4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.82 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style handlebars with 1-1\/8\" diameter. Compatible with Forbidden FM Moto bars by Fly Racing that feature 1\" ends for Harley-Davidson controls.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size bars does this riser accept?\u003c\/h3\u003e\n\u003cp\u003eThis riser accepts MX-style bars with a 1-1\/8\" clamping diameter. Check your bar specifications before ordering.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through the riser?\u003c\/h3\u003e\n\u003cp\u003eYes — the riser is pre-drilled with internal channels so you can route cables and wiring cleanly without external loom.\u003c\/p\u003e\n\u003ch3\u003eDoes this come with handlebar clamps?\u003c\/h3\u003e\n\u003cp\u003eThe riser includes the one-piece top clamp. You'll need to source handlebar grips and control hardware separately unless using Forbidden FM Moto bars.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 9\" and 11\" risers?\u003c\/h3\u003e\n\u003cp\u003eForbidden offers both 9\" and 11\" heights. The 9\" provides moderate rise; the 11\" gives maximum pullback for cruiser-style ergonomics.\u003c\/p\u003e\n\u003ch3\u003eIs the raw finish corrosion-resistant?\u003c\/h3\u003e\n\u003cp\u003eRaw aluminum will oxidize over time. For maximum durability outdoors, consider the black anodized version or apply a clear coat.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035469930607,"sku":"825-05000","price":278.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_3eac3469-87e3-48ef-88f2-ea9c500cb438.png?v=1779561778"},{"product_id":"forbidden-handlebar-riser-9-black-825-05001","title":"Forbidden Handlebar Riser - 9\" Black","description":"\u003cp\u003eForbidden Motorcycles 9\" handlebar riser in black anodized T6061 aluminum, built with a solid one-piece top clamp for MX-style bars with 1-1\/8\" diameter. Pre-drilled for internal wiring to keep your build clean.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping area for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp construction\u003c\/li\u003e\n  \u003cli\u003eT6061 aluminum with black anodized finish\u003c\/li\u003e\n  \u003cli\u003eFM logo machined into clamp\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05001\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290251\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.79 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style handlebars with 1-1\/8\" diameter. Compatible with Forbidden moto bars by Fly Racing (1\" ends) which are designed to bolt directly onto these risers.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat handlebar diameter does this riser clamp?\u003c\/h3\u003e\n\u003cp\u003e1-1\/8\" MX-style bars. Forbidden also makes FM moto bars by Fly Racing with 1\" ends that are pre-configured to bolt directly to this riser.\u003c\/p\u003e\n\u003ch3\u003eIs the top clamp one piece or split?\u003c\/h3\u003e\n\u003cp\u003eOne-piece construction for maximum stability and rigidity. No split-ring design here.\u003c\/p\u003e\n\u003ch3\u003eAre these pre-drilled for internal wiring?\u003c\/h3\u003e\n\u003cp\u003eYes — pre-drilled holes run through the riser for clean internal wire routing from the handlebar controls.\u003c\/p\u003e\n\u003ch3\u003eWhat material are these made from?\u003c\/h3\u003e\n\u003cp\u003eT6061 aluminum with black anodized finish. The FM logo is machined into the top clamp.\u003c\/p\u003e\n\u003ch3\u003eWhat height is this riser?\u003c\/h3\u003e\n\u003cp\u003e9 inches. Forbidden also offers an 11\" height if you need more reach.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035470028911,"sku":"825-05001","price":305.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/1031-5a452e7e8e542.jpg?v=1777528659"},{"product_id":"forbidden-handlebar-riser-11-raw-825-05002","title":"Forbidden Handlebar Riser - 11\" RAW","description":"\u003cp\u003eForbidden Motorcycles 11\" handlebar riser in raw aluminum, designed for 1-1\/8\" MX-style bars with one-piece top clamp construction. T6061 aluminum body features machined FM logo, pre-drilled for internal wiring, and pairs directly with Forbidden moto bars by Fly Racing.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping area for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp for stability\u003c\/li\u003e\n  \u003cli\u003eT6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003eRaw finish with machined FM logo\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003e11\" height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290268\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 1-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.9301 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style handlebars with 1-1\/8\" diameter. Works with Forbidden moto bars by Fly Racing featuring 1\" ends for Harley controls.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat handlebar diameter do these fit?\u003c\/h3\u003e\n\u003cp\u003eThese risers clamp 1-1\/8\" MX-style bars. Forbidden also offers compatible moto bars by Fly Racing with 1\" ends for HD control fitment.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through these risers?\u003c\/h3\u003e\n\u003cp\u003eYes — the risers are pre-drilled for internal wiring routing for a clean install.\u003c\/p\u003e\n\u003ch3\u003eWhat's the height difference between the 9\" and 11\" models?\u003c\/h3\u003e\n\u003cp\u003eThe 11\" model provides 2 inches more rise than the 9\" version for additional pullback and height.\u003c\/p\u003e\n\u003ch3\u003eIs the raw finish durable?\u003c\/h3\u003e\n\u003cp\u003eT6061 aluminum will patina over time with exposure. Many riders seal raw aluminum or switch to the black anodized option for a lasting finish.\u003c\/p\u003e\n\u003ch3\u003eDoes this work with stock Harley controls?\u003c\/h3\u003e\n\u003cp\u003eNot directly — stock Harley controls have 1\" ends. Pair these risers with Forbidden moto bars by Fly Racing, which have 1\" ends for HD control compatibility.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035470815343,"sku":"825-05002","price":292.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/fb4b-5ab287a9bfd5f.jpg?v=1777528659"},{"product_id":"forbidden-handlebar-riser-11-black-825-05003","title":"Forbidden Handlebar Riser - 11\" Black","description":"\u003cp\u003eForbidden Motorcycles 11\" handlebar riser in black anodized T6061 aluminum, designed for 1-1\/8\" MX-style bars with a one-piece top clamp for rigidity. Pre-drilled for internal wiring runs and machined with the FM logo.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp diameter for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp construction\u003c\/li\u003e\n  \u003cli\u003eBlack anodized T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wire routing\u003c\/li\u003e\n  \u003cli\u003e11\" rise height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05003\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290275\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 1-1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.33 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style handlebar tubes with 1-1\/8\" diameter. Compatible with Forbidden FM moto bars by Fly Racing that feature 1\" ends for Harley-Davidson control mounts.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size handlebars do these fit?\u003c\/h3\u003e\n\u003cp\u003eThese risers are designed for 1-1\/8\" MX-style bars. Forbidden also offers FM moto bars by Fly Racing that bolt directly to these risers.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through the risers?\u003c\/h3\u003e\n\u003cp\u003eYes — the risers come pre-drilled for internal cable and wiring routing for a clean, cable-managed look.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 9\" and 11\" risers?\u003c\/h3\u003e\n\u003cp\u003eForbidden offers both heights. The 11\" model provides more handlebar rise; choose based on your desired riding position and ergonomics.\u003c\/p\u003e\n\u003ch3\u003eAre these available in raw aluminum?\u003c\/h3\u003e\n\u003cp\u003eYes — Forbidden offers these risers in both raw and black anodized finishes.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035470848111,"sku":"825-05003","price":318.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/e21d-5ab288778fe97.jpg?v=1777528659"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-black-w-1-ends-825-05050","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar Black W\/1\" Ends — Harley-Davidson (1982-2018)","description":"\u003cp\u003eForbidden Moto Style handlebars in black, designed and made by Fly Racing with a 1-1\/8\" clamping area that tapers to 1\" ends to fit stock Harley hand controls without sleeving. Pre-drilled for internal wiring and compatible with Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" to 1\" taper fits stock Harley controls\u003c\/li\u003e\n  \u003cli\u003e32\" wide handlebar\u003c\/li\u003e\n  \u003cli\u003e3\" pullback and 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eCompatible with FM risers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2016HB-001BK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290503\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7175 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned for Harley-Davidson models using stock hand controls and Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo these bars work with stock Harley hand controls?\u003c\/h3\u003e\n\u003cp\u003eYes — the 1\" tapered ends fit stock Harley controls without requiring sleeves or adapters.\u003c\/p\u003e\n\u003ch3\u003eAre these pre-drilled for my Forbidden risers?\u003c\/h3\u003e\n\u003cp\u003eYes — holes are drilled for internal wiring and to run cables through Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the dimensions?\u003c\/h3\u003e\n\u003cp\u003e32\" wide with 3\" pullback and 2.5\" rise for a classic moto styling position.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars are pre-drilled with passages designed for internal cable and wire routing.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035470913647,"sku":"825-05050","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_28d13f18-a6b0-44d5-ad6b-322ed9a12023.png?v=1779565613"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-silver-w-1-ends-825-05051","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar Silver W\/1\" Ends — Harley-Davidson (1982-2018)","description":"\u003cp\u003eForbidden Moto Style handlebars in silver with 1\" tapered ends, designed to accept stock Harley hand controls without sleeving. Features 32\" width, 3\" pullback, and 2.5\" rise, pre-drilled for internal wiring and compatible with FM risers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping area tapers to 1\" for stock Harley controls\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eCompatible with FM risers for internal wire routing\u003c\/li\u003e\n  \u003cli\u003eMoto-style design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2016HB-001SL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290510\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.0404 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson models with stock hand controls. The tapered 1\" ends eliminate the need for control sleeves.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo these work with stock Harley hand controls?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars taper from 1-1\/8\" clamping area down to 1\" to fit stock Harley controls without sleeving.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars are pre-drilled for internal wiring and work with FM risers to route cables cleanly.\u003c\/p\u003e\n\u003ch3\u003eWhat are the dimensions?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide, 3 inches of pullback, and 2.5 inches of rise.\u003c\/p\u003e\n\u003ch3\u003eWill I need to modify my hand controls?\u003c\/h3\u003e\n\u003cp\u003eNo — the tapered 1\" ends fit stock Harley hand controls directly.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035470946415,"sku":"825-05051","price":109.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/d6c9-60649ccb24097.jpg?v=1777528660"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-gold-w-1-ends-825-05052","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar Gold W\/1\" Ends — Harley-Davidson (1982-2018)","description":"\u003cp\u003eForbidden Moto Style handlebars in gold finish with 1-inch tapered ends, designed to accept stock Harley hand controls without requiring sleeves. Made by Fly Racing, these bars feature a 1-1\/8-inch clamping diameter that steps down to 1 inch, with internal wiring passages pre-drilled for clean cable routing through FM risers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp diameter tapers to 1\" for stock Harley controls\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eWiring holes compatible with FM risers\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eGold anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2016HB-001GD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290527\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5352 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson models with stock hand controls that accept 1-inch bar ends. Compatible with Forbidden Motorcycles risers for internal wiring routing.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill I need to sleeve these bars to fit my Harley hand controls?\u003c\/h3\u003e\n\u003cp\u003eNo — the bars taper from 1-1\/8 inches at the clamp to 1 inch at the ends, so they fit stock Harley controls without sleeves.\u003c\/p\u003e\n\u003ch3\u003eAre these bars drilled for internal wiring?\u003c\/h3\u003e\n\u003cp\u003eYes — they're pre-drilled with passages for internal cable routing, including specific holes to run wires through FM risers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the bar dimensions?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide with 3 inches of pullback and 2.5 inches of rise.\u003c\/p\u003e\n\u003ch3\u003eDo I need FM risers to use these bars?\u003c\/h3\u003e\n\u003cp\u003eNo — the bars work with any 1-inch riser, but they're designed to integrate with FM risers for the internal wiring passages.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035471732847,"sku":"825-05052","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/0208-60b6644a39275.png?v=1777528661"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-red-w-1-ends-825-05053","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar RED W\/1\" Ends — Harley-Davidson (1982-2018)","description":"\u003cp\u003eForbidden moto-style handlebars in red with 1\" tapered ends, designed to fit stock Harley hand controls without sleeving adapters. Made by Fly Racing with a 1-1\/8\" clamping diameter that tapers to 1\", pre-drilled for internal wiring and compatible with Forbidden Motor risers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp diameter tapering to 1\" ends\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eAccepts stock Harley hand controls without adapters\u003c\/li\u003e\n  \u003cli\u003eDrilled for FM riser internal routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2016HB-001RD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290534\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.1761 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThese bars are designed for Harley models using stock hand control positions and work with Forbidden Motor risers for internal wire routing.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these bars work with my stock Harley hand controls?\u003c\/h3\u003e\n\u003cp\u003eYes — the 1\" tapered ends fit stock Harley hand controls directly without sleeves or adapters.\u003c\/p\u003e\n\u003ch3\u003eCan I run wires internally through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — bars are pre-drilled for internal wiring and include holes compatible with Forbidden Motor riser wiring paths.\u003c\/p\u003e\n\u003ch3\u003eWhat are the exact dimensions?\u003c\/h3\u003e\n\u003cp\u003e32\" wide, 3\" pullback, 2.5\" rise. Clamp diameter is 1-1\/8\" tapering to 1\" at the hand control ends.\u003c\/p\u003e\n\u003ch3\u003eDo I need special risers to use these bars?\u003c\/h3\u003e\n\u003cp\u003eThese bars work with Forbidden Motor risers for optimized internal wire routing, but can be used with other compatible riser brands.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035471798383,"sku":"825-05053","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/dc23-60b66462aabbe.png?v=1777528661"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-tbw-silver-w-1-ends-825-05055","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar TBW Silver W\/1\" Ends — Harley-Davidson Road King, Road King Classic, Freewheeler (2008-2018)","description":"\u003cp\u003eForbidden Moto Style handlebars in silver with 1\" tapered ends, engineered to fit Harley hand controls without sleeves. Made by Fly Racing with a 1-1\/8\" clamping diameter that steps down to 1\", pre-drilled for internal wiring and compatible with Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp diameter tapers to 1\" ends\u003c\/li\u003e\n  \u003cli\u003eFits stock Harley hand controls without adapters or sleeves\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eCompatible with Forbidden Motorcycles risers\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eSilver finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2017HB-001SL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290558\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 31.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.65 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.215 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson models with 1\" hand control mounting. Pre-drilled design works with Forbidden Motorcycles risers and internal wiring systems.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my stock Harley hand controls without sleeves?\u003c\/h3\u003e\n\u003cp\u003eYes — the 1\" tapered ends are designed to fit stock Harley controls directly without adapters or sleeves.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — they come pre-drilled with internal wire passages, including holes for Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the dimensions and geometry?\u003c\/h3\u003e\n\u003cp\u003e32\" wide with 3\" pullback and 2.5\" rise. Length is 31.5\", overall height 2.65\".\u003c\/p\u003e\n\u003ch3\u003eDo these require risers?\u003c\/h3\u003e\n\u003cp\u003eThese bars are compatible with Forbidden Motorcycles risers and standard 1-1\/8\" diameter clamps. Check your specific riser before ordering.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035689672815,"sku":"825-05055","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/74d4-5b86d75303634.jpg?v=1777529150"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-tbw-black-w-1-ends-825-05054","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar TBW Black W\/1\" Ends — Harley-Davidson Road King, Road King Classic, Freewheeler (2008-2018)","description":"\u003cp\u003eForbidden Moto Style handlebars in black with 1-inch tapered ends, designed to work directly with stock Harley hand controls without sleeves. Made by Fly Racing, these 32-inch-wide bars feature 3 inches of pullback and 2.5 inches of rise, with pre-drilled holes for internal wiring and FM riser compatibility.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp area tapers to 1\" for stock Harley controls\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eHoles for wiring through FM risers\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eMoto-style profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2017HB-001BK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290541\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.235 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned to work with stock Harley hand controls and Forbidden Motorcycles risers. Pre-drilled for internal wiring compatibility.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need sleeves or adapters for stock Harley controls?\u003c\/h3\u003e\n\u003cp\u003eNo — the 1-inch tapered ends fit stock Harley hand controls directly without sleeves or adapters.\u003c\/p\u003e\n\u003ch3\u003eAre these pre-drilled for wiring?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars are pre-drilled for internal wiring and include holes to run wires through FM risers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the dimensions?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide, 3 inches pullback, 2.5 inches rise. Dimensions accommodate both control placement and ergonomics.\u003c\/p\u003e\n\u003ch3\u003eCan I use these with non-Harley risers?\u003c\/h3\u003e\n\u003cp\u003eThese bars are designed for Harley hand controls and FM risers. Compatibility with other risers depends on your specific setup — verify before ordering.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035689705583,"sku":"825-05054","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/3078-5b86d71583119.jpg?v=1777529150"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-tbw-red-w-1-ends-825-05057","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar TBW RED W\/1\" Ends — Harley-Davidson Road King, Road King Classic, Freewheeler (2008-2018)","description":"\u003cp\u003eForbidden moto style handlebars with 1-inch tapered ends, designed to fit stock Harley hand controls without sleeving. Built by Fly Racing with a 1-1\/8\" clamping diameter that tapers down, 32\" wide with 3\" pullback and 2.5\" rise, pre-drilled for internal wiring and compatible with Forbidden Motor risers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp diameter tapering to 1\" for stock Harley controls\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eWiring holes compatible with FM risers\u003c\/li\u003e\n  \u003cli\u003eNo sleeving required for stock hand controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2017HB-001RD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290572\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eCompatible with stock Harley hand controls. Pre-drilled wiring ports work with Forbidden Motor risers for internal cable and wire routing.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to sleeve these bars to fit my Harley controls?\u003c\/h3\u003e\n\u003cp\u003eNo — the bars taper from 1-1\/8\" at the clamp to 1\" at the end, fitting stock Harley controls directly without modification.\u003c\/p\u003e\n\u003ch3\u003eWill these work with Forbidden Motor risers?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars are pre-drilled with wiring holes designed to run cables through FM risers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the dimensions?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide, 3 inches of pullback, and 2.5 inches of rise. Total length is 37 inches.\u003c\/p\u003e\n\u003ch3\u003eCan I use aftermarket hand controls with these bars?\u003c\/h3\u003e\n\u003cp\u003eYes, as long as your hand controls fit a 1-inch diameter grip tube. Most aftermarket controls are compatible.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035689738351,"sku":"825-05057","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/21c9-60b6647d4d05e.png?v=1777529151"},{"product_id":"forbidden-moto-style-handlebars-w-1-ends-handlebar-tbw-gold-w-1-ends-825-05056","title":"Forbidden Moto Style Handlebars w\/ 1\" Ends - Handlebar TBW Gold W\/1\" Ends — Harley-Davidson Road King, Road King Classic, Freewheeler (2008-2018)","description":"\u003cp\u003eForbidden Moto Style handlebars in gold with 1-inch tapered ends, engineered to fit stock Harley hand controls without sleeving adapters. Made by Fly Racing with a 1-1\/8-inch clamp area that steps down to 1 inch, plus pre-drilled holes for internal wiring and FM riser routing.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" to 1\" tapered diameter — fits stock Harley controls\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and FM riser routing\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eGold anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2017HB-001GD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290565\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.245 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson models that run stock hand controls and accept 1-inch bar ends. Compatible with Forbidden Moto (FM) risers with pre-drilled internal routing.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to buy sleeves or adapters for my Harley hand controls?\u003c\/h3\u003e\n\u003cp\u003eNo — the tapered 1-inch ends fit stock Harley controls directly without adapters or sleeving.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wires through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — pre-drilled holes allow you to route wires internally, including lines for Forbidden Moto risers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the exact dimensions?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide, 3 inches of pullback, and 2.5 inches of rise. The bars taper from 1-1\/8 inches at the clamp to 1 inch at the ends.\u003c\/p\u003e\n\u003ch3\u003eWill these work with aftermarket risers other than Forbidden Moto?\u003c\/h3\u003e\n\u003cp\u003eThe 1-inch taper fits standard Harley hand controls. Check your riser compatibility before ordering if using non-FM risers.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035689803887,"sku":"825-05056","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/4dda-60649ccb2d013.jpg?v=1777529152"},{"product_id":"forbidden-handlebar-riser-w-gauge-mount-tabs-9-raw-w-gauge-mount-tabs-825-05005","title":"Forbidden Handlebar Riser w\/Gauge Mount Tabs - 9\" RAW W\/Gauge Mount Tabs","description":"\u003cp\u003eForbidden Motorcycles handlebar riser in raw finish with 1-1\/8\" clamp diameter for MX-style bars and integrated gauge mount tabs. Machined from 6061-T6 aluminum with one-piece top clamp construction and pre-drilled internal wire routing for a clean cockpit setup.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp diameter for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp for stability\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminum construction\u003c\/li\u003e\n  \u003cli\u003eIntegrated gauge mount tabs\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eRaw finish with machined FM logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05005\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290299\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061-T6 Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 1-1\/8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.91 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits motorcycles using MX-style handlebars with 1-1\/8\" diameter. Compatible with Forbidden FM moto bars by Fly Racing and other aftermarket bars with 1-1\/8\" ends.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat handlebar diameter does this riser fit?\u003c\/h3\u003e\n\u003cp\u003e1-1\/8\" diameter MX-style bars. Will not fit 1\" or 1-1\/4\" bars without adapters.\u003c\/p\u003e\n\u003ch3\u003eCan I use this with stock Harley or Indian controls?\u003c\/h3\u003e\n\u003cp\u003eNo — stock controls are designed for 1\" bars. You'll need 1-1\/8\" MX-style bars or adapters.\u003c\/p\u003e\n\u003ch3\u003eAre the internal wire holes pre-drilled?\u003c\/h3\u003e\n\u003cp\u003eYes. The risers come pre-drilled for routing throttle and clutch cables internally for a cleaner look.\u003c\/p\u003e\n\u003ch3\u003eCan I add a speedometer or tachometer to this riser?\u003c\/h3\u003e\n\u003cp\u003eYes — the riser includes integrated gauge mount tabs for aftermarket gauges and speedo mounts.\u003c\/p\u003e\n\u003ch3\u003eWhat finish does this come in?\u003c\/h3\u003e\n\u003cp\u003eThis is the raw aluminum finish. Forbidden also offers these risers in black anodized if you prefer a darker look.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035730337903,"sku":"825-05005","price":281.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/7523-5ab288d1de8da.jpg?v=1777529223"},{"product_id":"forbidden-handlebar-riser-w-gauge-mount-tabs-9-black-w-gauge-mount-tabs-825-05006","title":"Forbidden Handlebar Riser w\/Gauge Mount Tabs - 9\" Black W\/Gauge Mount Tabs","description":"\u003cp\u003eForbidden Motorcycles 9\" handlebar riser in black anodized T6061 aluminum with machined FM logo and integrated gauge mount tabs. Features 1-1\/8\" clamping area for MX-style bars and internal pre-drilling for hidden wiring runs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping area for MX-style bars\u003c\/li\u003e\n  \u003cli\u003e9\" riser height\u003c\/li\u003e\n  \u003cli\u003eBlack anodized T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp construction\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eGauge mount tabs integrated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05006\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290305\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum, black anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRiser Height:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 1-1\/8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.92 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12 in L x 6.4 in W x 4.5 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style bars with 1-1\/8\" diameter tubing. Compatible with Forbidden's FM moto bars by Fly Racing and other 1-1\/8\" bar setups.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my stock Harley bars?\u003c\/h3\u003e\n\u003cp\u003eNo — these are designed for 1-1\/8\" MX-style bars. Stock Harley bars use different diameters and will not clamp properly.\u003c\/p\u003e\n\u003ch3\u003eWhat do the gauge mount tabs do?\u003c\/h3\u003e\n\u003cp\u003eThe integrated tabs allow you to mount aftermarket gauges or accessories to the top of the riser without drilling new holes.\u003c\/p\u003e\n\u003ch3\u003eCan I run wiring through the riser?\u003c\/h3\u003e\n\u003cp\u003eYes — the riser is pre-drilled internally for hidden wiring runs to keep your bike's front end clean.\u003c\/p\u003e\n\u003ch3\u003eDo I need FM moto bars to use these risers?\u003c\/h3\u003e\n\u003cp\u003eNo — any 1-1\/8\" diameter MX-style bar will clamp. Forbidden's FM bars by Fly Racing are designed to bolt directly on with matching internal wiring holes for the cleanest setup.\u003c\/p\u003e\n\u003ch3\u003eIs the FM logo cosmetic or does it affect function?\u003c\/h3\u003e\n\u003cp\u003eThe FM logo is machined into the aluminum as a cosmetic detail. It does not affect the riser's clamping strength or functionality.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035730436207,"sku":"825-05006","price":305.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/5f4b-5ab2892189742.jpg?v=1777529223"},{"product_id":"forbidden-handlebar-riser-w-gauge-mount-tabs-11-raw-w-gauge-mount-tabs-825-05007","title":"Forbidden Handlebar Riser w\/Gauge Mount Tabs - 11\" RAW W\/Gauge Mount Tabs","description":"\u003cp\u003eForbidden Motorcycles 11\" handlebar riser in raw aluminum with gauge mount tabs, engineered for 1-1\/8\" MX-style bars. One-piece top clamp delivers rock-solid stability, and pre-drilled internal wire channels keep your build clean.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping area for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp construction\u003c\/li\u003e\n  \u003cli\u003eT6061 aluminum with machined FM logo\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eGauge mount tabs included\u003c\/li\u003e\n  \u003cli\u003e11\" rise height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05007\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290312\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style handlebars with 1-1\/8\" diameter. Compatible with Forbidden FM moto bars by Fly Racing and other aftermarket bars in this diameter range.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my stock Harley bars?\u003c\/h3\u003e\n\u003cp\u003eNo — stock Harley bars use a 1\" diameter clamp. These risers are designed for 1-1\/8\" MX-style bars only.\u003c\/p\u003e\n\u003ch3\u003eWhat are the gauge mount tabs for?\u003c\/h3\u003e\n\u003cp\u003eThe tabs allow you to mount aftermarket gauges or accessories directly to the riser without additional brackets.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through these risers?\u003c\/h3\u003e\n\u003cp\u003eYes — the risers come pre-drilled with channels for internal clutch and throttle cable routing for a clean appearance.\u003c\/p\u003e\n\u003ch3\u003eDo these risers work with Forbidden's FM moto bars?\u003c\/h3\u003e\n\u003cp\u003eYes — Forbidden offers FM moto bars by Fly Racing with 1\" ends for HD controls and pre-drilled holes that bolt directly onto these risers.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the raw and black anodized versions?\u003c\/h3\u003e\n\u003cp\u003eBoth use the same T6061 aluminum construction and clamping area. Raw has a natural aluminum finish; black anodized adds a protective coating.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035730501743,"sku":"825-05007","price":296.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/471f-5ab3bebb97891.jpg?v=1777529224"},{"product_id":"forbidden-top-clamp-w-gauge-mount-tabs-black-w-gauge-mount-tabs-825-05011","title":"Forbidden Top Clamp w\/Gauge Mount Tabs - Black W\/Gauge Mount Tabs","description":"\u003cp\u003eForbidden top clamp in black powder-coated finish with integrated gauge mount tabs for securing aftermarket gauges and accessories on V-twin motorcycles. Universal design fits most handlebar and frame configurations without modification.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated gauge mount tabs\u003c\/li\u003e\n  \u003cli\u003eBlack powder-coated finish\u003c\/li\u003e\n  \u003cli\u003e6 in × 4 in × 1 in dimensions\u003c\/li\u003e\n  \u003cli\u003eUniversal V-twin fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05011\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290343\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.64 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits most V-twin motorcycles for aftermarket gauge and accessory mounting. Universal design works with Harley-Davidson and Indian frames.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size gauges will this clamp accommodate?\u003c\/h3\u003e\n\u003cp\u003eThe integrated tabs are designed for standard aftermarket gauges. Verify your gauge base plate dimensions against the 6 in × 4 in clamp footprint before ordering.\u003c\/p\u003e\n\u003ch3\u003eDo I need any additional hardware to install this?\u003c\/h3\u003e\n\u003cp\u003eThe clamp includes mounting tabs. You'll need bolts and fasteners appropriate for your specific gauge and frame attachment points.\u003c\/p\u003e\n\u003ch3\u003eWill this fit my cruiser or bagger?\u003c\/h3\u003e\n\u003cp\u003eYes — the universal V-twin design works on Harley Touring, Softail, Sportster, Dyna, and Indian models with standard top clamp mounting.\u003c\/p\u003e\n\u003ch3\u003eIs the finish corrosion-resistant?\u003c\/h3\u003e\n\u003cp\u003eBlack powder-coat finish resists rust and UV fading. Inspect mounting points regularly for moisture, especially if riding in wet conditions.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035731288175,"sku":"825-05011","price":108.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/c732-5ab3bdae758d3.jpg?v=1777529224"},{"product_id":"forbidden-handlebar-riser-w-gauge-mount-tabs-11-black-w-gauge-mount-tabs-825-05008","title":"Forbidden Handlebar Riser w\/Gauge Mount Tabs - 11\" Black W\/Gauge Mount Tabs","description":"\u003cp\u003eForbidden Motorcycles handlebar riser in 11\" height with integrated gauge mount tabs, featuring 1-1\/8\" clamping area for MX-style bars. One-piece top clamp construction delivers extreme stability, while 6061 T6 aluminum body is pre-drilled for internal wiring and offers black anodized finish with machined FM logo.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp diameter for MX-style bars\u003c\/li\u003e\n  \u003cli\u003e11\" riser height\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp construction\u003c\/li\u003e\n  \u003cli\u003e6061 T6 aluminum\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eIntegrated gauge mount tabs\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05008\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290329\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.265 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061 T6 Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style handlebar tubes with 1-1\/8\" diameter. Compatible with Forbidden FM moto bars by Fly Racing which feature 1\" ends for Harley controls and pre-drilled holes for internal wiring.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size bars does this riser clamp?\u003c\/h3\u003e\n\u003cp\u003e1-1\/8\" diameter MX-style bars. Forbidden FM moto bars by Fly Racing are pre-drilled to bolt directly onto these risers.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drill holes for wiring?\u003c\/h3\u003e\n\u003cp\u003eNo — both the riser and compatible FM bars come pre-drilled for internal wiring, allowing a clean assembly without additional drilling.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 9\" and 11\" risers?\u003c\/h3\u003e\n\u003cp\u003eThe 11\" version provides additional handlebar height and pullback. Forbidden also offers a 9\" height option.\u003c\/p\u003e\n\u003ch3\u003eCan I use this with stock Harley bars?\u003c\/h3\u003e\n\u003cp\u003eThis riser is designed for 1-1\/8\" diameter MX-style bars. Stock Harley bars have different diameters and are not compatible.\u003c\/p\u003e\n\u003ch3\u003eWhat are the gauge mount tabs for?\u003c\/h3\u003e\n\u003cp\u003eThe integrated tabs allow you to mount a speedometer, tachometer, or other gauges directly to the riser without additional brackets.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035731353711,"sku":"825-05008","price":321.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/4018-5ab3be79979d0.jpg?v=1777529224"},{"product_id":"forbidden-og-slims-riser-9-raw-825-05020","title":"Forbidden OG Slims Riser - 9\" RAW — Harley-Davidson Electra Glide, Softail Heritage Classic, Electra Glide Classic (1955-2026)","description":"\u003cp\u003eForbidden OG Slims 9\" riser in raw aluminum finish, machined from T6 6061 aluminum with a one-piece top clamp designed for MX-style bars with 1\" clamping diameter. Built on OEM bolt pattern for direct fitment and extreme stability.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eT6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp design\u003c\/li\u003e\n  \u003cli\u003e9\" rise height\u003c\/li\u003e\n  \u003cli\u003e1\" clamping diameter for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOEM bolt pattern compatibility\u003c\/li\u003e\n  \u003cli\u003eRaw anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05020\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290367\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise Height:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamping Diameter:\u003c\/strong\u003e 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 12\" L x 8\" W x 6.5\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my cruiser with stock risers?\u003c\/h3\u003e\n\u003cp\u003eThese risers use OEM bolt pattern on the top clamp for direct fitment to most Harley and Indian models. Verify your bike's current clamp diameter before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat bars can I run with the 1\" clamping area?\u003c\/h3\u003e\n\u003cp\u003eThe 1\" clamping diameter is designed for MX-style handlebars. Standard cruiser bars typically have different diameters — check your bar specs.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 9\" and 11\" rise?\u003c\/h3\u003e\n\u003cp\u003eThe 9\" model provides moderate height for a more forward riding position. The 11\" option raises the bars higher for a taller rider or a different ergonomic feel.\u003c\/p\u003e\n\u003ch3\u003eIs this raw finish corrosion resistant?\u003c\/h3\u003e\n\u003cp\u003eRaw aluminum will oxidize over time outdoors. Many riders polish or apply protective coating. Black anodize is available as an alternative for corrosion resistance.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035736367215,"sku":"825-05020","price":266.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/3716-5a453126b1b6e_2852178c-9a17-4c5e-a951-fa042e467439.jpg?v=1777529233"},{"product_id":"forbidden-og-slims-riser-9-black-825-05021","title":"Forbidden OG Slims Riser - 9\" Black","description":"\u003cp\u003eForbidden Motorcycles OG Slims riser in black anodize, a 9\" rise handlebar riser machined from T6061 aluminum with a one-piece top clamp design. Accepts 1\" diameter MX-style bars and uses OEM bolt patterns for direct fitment on most cruisers and touring bikes.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eT6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003e9 inch rise\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp for stability\u003c\/li\u003e\n  \u003cli\u003e1 inch bar clamp diameter\u003c\/li\u003e\n  \u003cli\u003eOEM bolt pattern compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05021\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290374\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodize\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size handlebar does this riser accept?\u003c\/h3\u003e\n\u003cp\u003e1 inch diameter bars — MX-style, cruiser, and most aftermarket handlebar types will fit the top clamp.\u003c\/p\u003e\n\u003ch3\u003eDoes this use OEM mounting holes?\u003c\/h3\u003e\n\u003cp\u003eYes — the one-piece top clamp uses the OEM bolt pattern, so it bolts directly to most cruiser and touring bike frames without adapters.\u003c\/p\u003e\n\u003ch3\u003eHow much rise do I get?\u003c\/h3\u003e\n\u003cp\u003e9 inches of vertical rise from the riser's base to the bar mounting surface.\u003c\/p\u003e\n\u003ch3\u003eIs the black finish durable?\u003c\/h3\u003e\n\u003cp\u003eThe black anodized aluminum finish resists corrosion and scratching better than raw aluminum, though minor wear and UV fading is normal over time.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035736334447,"sku":"825-05021","price":345.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/6fff-5a949b6c82cca.jpg?v=1777529233"},{"product_id":"forbidden-og-slims-riser-11-raw-825-05022","title":"Forbidden OG Slims Riser - 11\" RAW — Harley-Davidson Electra Glide, Softail Heritage Classic, Electra Glide Classic (1955-2026)","description":"\u003cp\u003eForbidden OG Slims risers in raw aluminum, an 11-inch rise designed to fit MX-style bars with 1-inch clamping diameter. Built from T6061 aluminum with a one-piece top clamp for stability and uses OEM bolt pattern for direct fitment.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eT6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003e11-inch rise height\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp design\u003c\/li\u003e\n  \u003cli\u003eFits 1-inch diameter MX-style handlebars\u003c\/li\u003e\n  \u003cli\u003eOEM bolt pattern compatibility\u003c\/li\u003e\n  \u003cli\u003eRaw finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05022\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290381\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat handlebar diameter do these risers accept?\u003c\/h3\u003e\n\u003cp\u003eThese OG Slims are designed for MX-style bars with a 1-inch clamping diameter.\u003c\/p\u003e\n\u003ch3\u003eDo these use OEM bolt holes on my bike?\u003c\/h3\u003e\n\u003cp\u003eYes — the top clamp uses the OEM bolt pattern, so installation uses your existing fasteners.\u003c\/p\u003e\n\u003ch3\u003eCan I run these with stock Harley bars?\u003c\/h3\u003e\n\u003cp\u003eNo — stock Harley bars typically have a different clamping diameter. These are sized for 1-inch MX-style handlebars.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 9-inch and 11-inch models?\u003c\/h3\u003e\n\u003cp\u003eThe 11-inch rise provides more height for a more upright riding position; the 9-inch is a more modest lift.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035736399983,"sku":"825-05022","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/3716-5a453126b1b6e.jpg?v=1777529233"},{"product_id":"forbidden-og-slims-riser-11-black-825-05023","title":"Forbidden OG Slims Riser - 11\" Black","description":"\u003cp\u003eForbidden OG Slims riser in 11\" rise with black anodized finish, forged from T6061 aluminum with Forbidden's signature one-piece top clamp for extreme stability. Designed to accept 1\" clamping diameter bars and uses OEM bolt patterns for direct fitment.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eT6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003e11\" rise height\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp design\u003c\/li\u003e\n  \u003cli\u003e1\" bar clamp diameter\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish\u003c\/li\u003e\n  \u003cli\u003eOEM bolt pattern compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05023\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290398\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise Height:\u003c\/strong\u003e 11 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length:\u003c\/strong\u003e 12 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height:\u003c\/strong\u003e 6.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat bar diameter do these risers accept?\u003c\/h3\u003e\n\u003cp\u003e1 inch clamping diameter. Compatible with MX-style bars and any aftermarket bar with 1 inch center clamp area.\u003c\/p\u003e\n\u003ch3\u003eWill these fit my Harley or Indian?\u003c\/h3\u003e\n\u003cp\u003eThese use OEM bolt patterns for direct fitment. Verify your bike's riser bolt pattern matches before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 9\" and 11\" rise?\u003c\/h3\u003e\n\u003cp\u003eThe 11\" model provides 2 inches more height than the 9\" version for a more forward riding position.\u003c\/p\u003e\n\u003ch3\u003eAre these available in other finishes?\u003c\/h3\u003e\n\u003cp\u003eYes — Forbidden also offers these OG Slims risers in raw aluminum finish if you prefer an unpainted look.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035737284719,"sku":"825-05023","price":352.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/6625-5ab3bd8038f9b.jpg?v=1777529234"},{"product_id":"forbidden-handlebar-riser-2-raw-825-05030","title":"Forbidden Handlebar Riser - 2\" RAW","description":"\u003cp\u003eForbidden Motorcycles handlebar riser in raw aluminum, designed to mount MX-style bars with a 1-1\/8\" clamp diameter. Features one-piece top clamp construction and pre-drilled internal wiring channels for a clean cable routing on any bike using aftermarket bars.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping area for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp for stability\u003c\/li\u003e\n  \u003cli\u003eT 6061 aluminum construction\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eFM logo machined into clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05030\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290404\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T 6061 aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4.75 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits any motorcycle using MX-style handlebars with a 1-1\/8\" diameter clamp area.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat bar diameter does this riser accept?\u003c\/h3\u003e\n\u003cp\u003e1-1\/8\" clamping area for MX-style bars. Forbidden also offers FM moto bars by Fly Racing with 1\" ends for Harley controls that bolt directly to these risers.\u003c\/p\u003e\n\u003ch3\u003eAre the wiring channels really pre-drilled?\u003c\/h3\u003e\n\u003cp\u003eYes — the risers come pre-drilled for internal wiring to route brake and clutch cables cleanly without external routing.\u003c\/p\u003e\n\u003ch3\u003eCan I run stock Harley bars on this?\u003c\/h3\u003e\n\u003cp\u003eStock Harley bars use a 1\" diameter. This riser is designed for 1-1\/8\" MX-style bars, though Forbidden offers compatible FM moto bars by Fly Racing.\u003c\/p\u003e\n\u003ch3\u003eWhat finish options are available?\u003c\/h3\u003e\n\u003cp\u003eThis part comes in raw aluminum. A black anodized version is also available if you prefer a darker look.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035815370863,"sku":"825-05030","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/e04d-5b806bb3518f4.jpg?v=1777529449"},{"product_id":"forbidden-handlebar-riser-2-black-825-05031","title":"Forbidden Handlebar Riser - 2\" Black","description":"\u003cp\u003eForbidden Motorcycles handlebar riser in black anodized 6061 T6 aluminum, engineered for 1-1\/8\" MX-style bars with a one-piece top clamp for maximum rigidity. Pre-drilled for internal wiring and designed to work seamlessly with Fly Racing FM moto bars and Harley controls.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping area for MX-style bars\u003c\/li\u003e\n  \u003cli\u003eOne-piece top clamp construction\u003c\/li\u003e\n  \u003cli\u003e6061 T6 aluminum, black anodized finish\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring\u003c\/li\u003e\n  \u003cli\u003eMachined FM logo detail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05031\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290411\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 6061 T6 Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 4.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4.75 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.8 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits MX-style handlebar tubes with 1-1\/8\" diameter clamping area. Compatible with Fly Racing FM moto bars and Harley control setups.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size handlebar does this fit?\u003c\/h3\u003e\n\u003cp\u003eThis riser is designed for 1-1\/8\" MX-style handlebar tubes. Check your bar diameter before ordering.\u003c\/p\u003e\n\u003ch3\u003eCan I use this with stock Harley bars?\u003c\/h3\u003e\n\u003cp\u003eStock Harley bars typically use 1\" diameter ends. Forbidden recommends pairing these risers with Fly Racing FM moto bars, which have 1\" ends for HD controls and pre-drilled holes for internal wiring.\u003c\/p\u003e\n\u003ch3\u003eAre the risers pre-drilled for wiring?\u003c\/h3\u003e\n\u003cp\u003eYes — both the risers and compatible FM moto bars come pre-drilled for internal wiring to keep your build clean.\u003c\/p\u003e\n\u003ch3\u003eWhat material are these made from?\u003c\/h3\u003e\n\u003cp\u003e6061 T6 aluminum with black anodized finish for durability and corrosion resistance.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035815403631,"sku":"825-05031","price":152.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/a3f3-5b5893f4debd2.jpg?v=1777529449"},{"product_id":"forbidden-hud-riser-w-hud-11-fxbb-raw-825-05040","title":"Forbidden Hud Riser - W\/HUD 11\" Fxbb RAW — Harley-Davidson Dyna Street Bob (2006-2019)","description":"\u003cp\u003eForbidden Motorcycles HUD riser for M8 Softail Street Bob, designed to house the factory digital gauge while accepting 1-1\/8\" moto-style handlebars. Delivers the classic Forbidden look without gauge relocation or aftermarket alternatives.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts M8 Softail Street Bob factory digital gauge\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1-1\/8\" moto-style bars\u003c\/li\u003e\n  \u003cli\u003eRaw finish\u003c\/li\u003e\n  \u003cli\u003e9\" and 11\" versions may require gauge wiring harness extension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05040\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290442\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 11\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6.4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson M8 Softail Street Bob with factory digital gauge.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Street Bob with aftermarket bars?\u003c\/h3\u003e\n\u003cp\u003eThis riser is designed for 1-1\/8\" diameter moto-style bars. Verify your bar diameter before ordering to ensure fitment.\u003c\/p\u003e\n\u003ch3\u003eDo I need to relocate the factory gauge?\u003c\/h3\u003e\n\u003cp\u003eNo — the HUD riser is designed to house the factory M8 Street Bob digital gauge in place without relocation.\u003c\/p\u003e\n\u003ch3\u003eWill the gauge wiring reach?\u003c\/h3\u003e\n\u003cp\u003eThe 9\" and 11\" versions may require extending the gauge wiring harness. Plan accordingly during installation.\u003c\/p\u003e\n\u003ch3\u003eWhat finish does this come in?\u003c\/h3\u003e\n\u003cp\u003eRaw finish — ready to paint or powder coat to match your bike's aesthetic.\u003c\/p\u003e\n\u003ch3\u003eCan I use this with 1\" or 1-1\/4\" bars?\u003c\/h3\u003e\n\u003cp\u003eNo — this riser is engineered for 1-1\/8\" diameter bars only.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035827134575,"sku":"825-05040","price":264.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/3820-5c630eb484df9.jpg?v=1777529560"},{"product_id":"forbidden-hud-riser-w-hud-11-fxbb-black-825-05041","title":"Forbidden Hud Riser - W\/HUD 11\" Fxbb Black — Harley-Davidson Dyna Street Bob (2006-2019)","description":"\u003cp\u003eForbidden Motorcycles 11\" handlebar riser with integrated HUD cutout for the M8 Softail Street Bob's digital gauge cluster. Accepts 1-1\/8\" moto-style bars and maintains the signature Forbidden look without requiring gauge relocation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts M8 Softail Street Bob digital gauge\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1-1\/8\" moto-style handlebars\u003c\/li\u003e\n  \u003cli\u003e11\" rise dimension\u003c\/li\u003e\n  \u003cli\u003eMay require gauge wiring harness extension on 9\" and 11\" models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05041\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290459\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6.4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4.6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit the M8 Softail Street Bob?\u003c\/h3\u003e\n\u003cp\u003eYes — designed specifically for the M8 Softail Street Bob with the factory digital gauge cluster.\u003c\/p\u003e\n\u003ch3\u003eDo I need to relocate the gauge?\u003c\/h3\u003e\n\u003cp\u003eNo — the riser accepts the stock Street Bob gauge without relocation.\u003c\/p\u003e\n\u003ch3\u003eWhat handlebar size does this accept?\u003c\/h3\u003e\n\u003cp\u003e1-1\/8\" diameter moto-style handlebars.\u003c\/p\u003e\n\u003ch3\u003eWill I need to extend the gauge wiring?\u003c\/h3\u003e\n\u003cp\u003eThe 9\" and 11\" versions may require extending the gauge wiring harness — verify fit before final installation.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035827167343,"sku":"825-05041","price":300.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/a0cc-5bf5bc835857f.jpg?v=1777529560"},{"product_id":"forbidden-hud-riser-w-hud-9-fxbb-raw-825-05042","title":"Forbidden Hud Riser - W\/HUD 9\" Fxbb RAW — Harley-Davidson Dyna Street Bob (2006-2019)","description":"\u003cp\u003eForbidden Motorcycles handlebar riser with integrated HUD cutout, designed for M8 Softail Street Bob models that accept the factory digital gauge without relocation. Machined in raw finish and accepts 1-1\/8\" moto-style handlebars.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts M8 Softail Street Bob digital gauge\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1-1\/8\" moto-style bars\u003c\/li\u003e\n  \u003cli\u003eRaw machined finish\u003c\/li\u003e\n  \u003cli\u003e9\" riser height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05042\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290466\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6.4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.8 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits M8 Harley-Davidson Softail Street Bob with factory digital gauge.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Street Bob with the factory digital gauge?\u003c\/h3\u003e\n\u003cp\u003eYes — these risers are designed specifically to accept the M8 Softail Street Bob's digital gauge without modification or relocation.\u003c\/p\u003e\n\u003ch3\u003eDo I need to extend the gauge wiring?\u003c\/h3\u003e\n\u003cp\u003eThe 9\" riser height may require extending the gauge wiring harness depending on your bar routing. Check fitment before final installation.\u003c\/p\u003e\n\u003ch3\u003eWhat handlebar diameter do these accept?\u003c\/h3\u003e\n\u003cp\u003eThese risers accept 1-1\/8\" moto-style handlebars. Verify your bars match this diameter before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat's the raw finish and will it rust?\u003c\/h3\u003e\n\u003cp\u003eRaw machined aluminum will oxidize over time. Many riders clear-coat or polish raw risers for aesthetics and corrosion protection.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035827232879,"sku":"825-05042","price":261.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/b4dc-5bd31365deef8.jpg?v=1777529560"},{"product_id":"forbidden-hud-riser-w-hud-9-fxbb-black-825-05043","title":"Forbidden Hud Riser - W\/HUD 9\" Fxbb Black — Harley-Davidson Dyna Street Bob (2006-2019)","description":"\u003cp\u003eForbidden HUD Riser in black with integrated digital gauge mounting for Milwaukee-Eight Softail Street Bob. Maintains the signature Forbidden aesthetic while accommodating the M8 Street Bob's factory digital display and accepting 1-1\/8″ moto-style handlebars.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts M8 Softail Street Bob digital gauge\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1-1\/8″ moto-style handlebars\u003c\/li\u003e\n  \u003cli\u003eFactory gauge fitment — no relocation needed\u003c\/li\u003e\n  \u003cli\u003eBlack finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 825-05043\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290473\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12.7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6.4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 3.3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.8 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson M8 Softail Street Bob models with factory digital gauge cluster.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Street Bob with the factory digital gauge?\u003c\/h3\u003e\n\u003cp\u003eYes — these risers are designed specifically for the M8 Softail Street Bob digital gauge mounting.\u003c\/p\u003e\n\u003ch3\u003eCan I use any 1-1\/8\" handlebars with this riser?\u003c\/h3\u003e\n\u003cp\u003eYes, any 1-1\/8″ moto-style handlebars will fit.\u003c\/p\u003e\n\u003ch3\u003eDo I need to extend the gauge wiring harness?\u003c\/h3\u003e\n\u003cp\u003eThe 9″ and 11″ versions may require extending the gauge wiring harness depending on your handlebar choice and routing.\u003c\/p\u003e\n\u003ch3\u003eWhat finish comes with this riser?\u003c\/h3\u003e\n\u003cp\u003eGloss black finish.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035827298415,"sku":"825-05043","price":311.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/9e75-5bf80d1260bdc.jpg?v=1777529561"},{"product_id":"forbidden-moto-style-hi-rise-bars-hbar-hi-rise-black-825-05058","title":"Forbidden Moto Style Hi Rise Bars - Hbar HI Rise Black","description":"\u003cp\u003eForbidden Moto Style hi-rise handlebars in black, designed by Forbidden Motorcycles and made by Fly Racing. They feature a tapered 1-1\/8\" to 1\" design that fits stock Harley hand controls without sleeving, plus pre-drilled holes for internal wiring and FM riser compatibility.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp tapering to 1\" — fits stock Harley controls without adapters\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and FM riser routing\u003c\/li\u003e\n  \u003cli\u003e32\" wide with 3\" pullback and 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eMoto-style profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2020TFM-01BK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290138\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eCompatible with Harley-Davidson models that accept aftermarket handlebars. Works with Forbidden Motorcycles FM risers for internal wiring routing.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my stock Harley hand controls?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars taper from 1-1\/8\" to 1\", fitting stock Harley controls without needing sleeves or adapters.\u003c\/p\u003e\n\u003ch3\u003eCan I run cables and wires through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — they are pre-drilled for internal wiring and designed to work with FM risers for clean wire routing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the pullback and rise on these bars?\u003c\/h3\u003e\n\u003cp\u003e3 inches of pullback and 2.5 inches of rise, giving a moderate moto-style riding position.\u003c\/p\u003e\n\u003ch3\u003eAre these bars brand new or used?\u003c\/h3\u003e\n\u003cp\u003eForbidden Moto Style bars are new. They are made by Fly Racing to Forbidden Motorcycles' design specifications.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035901223023,"sku":"825-05058","price":140.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/825a-60b664946520f.png?v=1777530151"},{"product_id":"forbidden-moto-style-hi-rise-bars-hbar-hi-rise-red-825-05061","title":"Forbidden Moto Style Hi Rise Bars - Hbar HI Rise RED","description":"\u003cp\u003eForbidden Moto Style hi-rise handlebars in red, designed by Forbidden Motorcycles and manufactured by Fly Racing. Features a 1-1\/8\" clamping diameter that tapers to 1\" to fit stock Harley hand controls without modification, plus internal wire routing channels for a clean install.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" to 1\" taper fits stock Harley controls without sleeving\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and FM riser compatibility\u003c\/li\u003e\n  \u003cli\u003e32\" wide with 3\" pullback and 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eMoto-style design in red finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2020TFM-01RD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290169\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson models with 1-1\/8\" handlebar clamping diameter. The tapered design accommodates stock Harley hand controls and works with Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my Harley without adapters or sleeving?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars taper from 1-1\/8\" at the clamp to 1\" to fit stock Harley controls without modification or sleeves.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes. They are pre-drilled with channels for internal wiring and compatible with Forbidden Motorcycles riser wire routing.\u003c\/p\u003e\n\u003ch3\u003eWhat are the exact dimensions?\u003c\/h3\u003e\n\u003cp\u003e32\" wide, 3\" pullback, 2.5\" rise. The bars measure 31.5 in length overall.\u003c\/p\u003e\n\u003ch3\u003eAre these made by Forbidden?\u003c\/h3\u003e\n\u003cp\u003eDesigned by Forbidden Motorcycles and manufactured by Fly Racing under their specifications.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035901288559,"sku":"825-05061","price":140.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/16fa-60b664e38eaa8.png?v=1777530151"},{"product_id":"forbidden-moto-style-hi-rise-bars-hbar-hi-rise-silver-825-05059","title":"Forbidden Moto Style Hi Rise Bars - Hbar HI Rise Silver","description":"\u003cp\u003eForbidden Moto Style hi-rise handlebars in silver, designed by Forbidden Motorcycles and made by Fly Racing. These bars feature a 1-1\/8\" clamp that tapers to 1\" to fit stock Harley hand controls without sleeves, plus pre-drilled internal wire channels and FM riser pass-throughs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp tapers to 1\" for stock Harley controls\u003c\/li\u003e\n  \u003cli\u003eNo sleeving required\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and FM riser routing\u003c\/li\u003e\n  \u003cli\u003e32\" wide, 3\" pullback, 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eSilver finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2020TFM-01SL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290145\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 1-1\/8\" tapers to 1\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned to fit Harley-Davidson models with stock hand controls and compatible with Forbidden Motorcycles risers that feature internal wire routing holes.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit stock Harley hand controls without sleeves?\u003c\/h3\u003e\n\u003cp\u003eYes. The 1-1\/8\" clamp tapers to 1\" to accommodate Harley hand controls, eliminating the need for sleeves.\u003c\/p\u003e\n\u003ch3\u003eCan I run wiring through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes. The bars are pre-drilled with internal wiring channels and holes to route wires through Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch3\u003eWhat are the bar dimensions?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide, 3 inches of pullback, and 2.5 inches of rise.\u003c\/p\u003e\n\u003ch3\u003eAre these compatible with Forbidden Motorcycles risers?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars are pre-drilled with holes specifically designed to work with FM risers for clean internal wire routing.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035901321327,"sku":"825-05059","price":140.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/9b48-60b664b1a81e5.png?v=1777530151"},{"product_id":"forbidden-moto-style-hi-rise-bars-hbar-hi-rise-black-tbw-825-05062","title":"Forbidden Moto Style Hi Rise Bars - Hbar HI Rise Black TBW — Harley-Davidson (1955-2026)","description":"\u003cp\u003eForbidden Moto Style hi-rise handlebars in black, designed by Forbidden Motorcycles and manufactured by Fly Racing. These 32-inch wide bars feature a 1-1\/8\" clamp that tapers to 1\" to fit stock Harley hand controls without sleeving, plus pre-drilled holes for internal wiring and FM riser compatibility.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp tapers to 1\" for stock Harley controls\u003c\/li\u003e\n  \u003cli\u003eNo sleeving required\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and FM risers\u003c\/li\u003e\n  \u003cli\u003e32\" wide with 3\" pullback and 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eBlack finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2020TFMT-01BK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290176\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamping Diameter:\u003c\/strong\u003e 1-1\/8 inch (tapers to 1 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these bars fit my Harley with stock hand controls?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars clamp at 1-1\/8\" but taper down to 1\", so stock Harley controls fit without adapters or sleeving.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wires through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars are pre-drilled for internal wiring and compatible with Forbidden Motorcycles risers for a clean wire routing.\u003c\/p\u003e\n\u003ch3\u003eWhat are the bar dimensions?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide, 3 inches of pullback, and 2.5 inches of rise — a moderate moto-style position.\u003c\/p\u003e\n\u003ch3\u003eDo these work with aftermarket risers?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to work with Forbidden Motorcycles risers. Check compatibility with other riser brands before ordering.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035901386863,"sku":"825-05062","price":140.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/11bd-60b6650b78fe6.png?v=1777530151"},{"product_id":"forbidden-moto-style-hi-rise-bars-hbar-hi-rise-silver-tbw-825-05063","title":"Forbidden Moto Style Hi Rise Bars - Hbar HI Rise Silver TBW","description":"\u003cp\u003eForbidden Moto Style hi-rise handlebars in silver, designed by Forbidden Motorcycles and made by Fly Racing. These moto-profile bars feature a 1-1\/8\" clamping diameter that tapers to 1\" to fit Harley stock controls without sleeving, plus internal wire channels for clean cable routing through FM risers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" to 1\" tapered clamp diameter fits Harley controls without adapters\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and FM riser wire channels\u003c\/li\u003e\n  \u003cli\u003e32\" wide with 3\" pullback and 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eSilver anodized finish\u003c\/li\u003e\n  \u003cli\u003eMoto-style profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2020TFMT-01SL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290183\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Diameter:\u003c\/strong\u003e 1-1\/8 in clamping, tapers to 1 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson models with stock hand controls and internal wire routing compatible with Forbidden riser systems.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my Harley without a clamp adapter?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars taper from 1-1\/8\" clamping diameter down to 1\" to fit Harley stock controls without sleeving or adapters.\u003c\/p\u003e\n\u003ch3\u003eCan I run internal wiring through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — pre-drilled holes allow cables and wires to run internally, including through Forbidden riser channels for a clean install.\u003c\/p\u003e\n\u003ch3\u003eWhat is the pullback and rise?\u003c\/h3\u003e\n\u003cp\u003e3 inches of pullback and 2.5 inches of rise, giving a relaxed cruiser riding position.\u003c\/p\u003e\n\u003ch3\u003eDo I need to remove my hand controls to install these?\u003c\/h3\u003e\n\u003cp\u003eYes — you'll need to transfer your Harley hand controls from the stock bars to these Forbidden bars during installation.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035901419631,"sku":"825-05063","price":140.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/24aa-60b66549799da.png?v=1777530152"},{"product_id":"forbidden-moto-style-hi-rise-bars-hbar-hi-rise-gold-tbw-825-05064","title":"Forbidden Moto Style Hi Rise Bars - Hbar HI Rise Gold TBW","description":"\u003cp\u003eForbidden Moto Style hi-rise handlebars in gold, designed by Forbidden Motorcycles and manufactured by Fly Racing. These 32-inch bars feature a 1-1\/8\" clamping diameter that tapers to 1\" to fit stock Harley hand controls without sleeving, plus pre-drilled holes for internal wiring and throttle-by-wire routing.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamping diameter tapering to 1\" for stock Harley controls\u003c\/li\u003e\n  \u003cli\u003eNo sleeving required\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and throttle-by-wire cables\u003c\/li\u003e\n  \u003cli\u003e32\" wide with 3\" pullback and 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eGold finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2020TFMT-01GD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290190\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClamp Diameter:\u003c\/strong\u003e 1-1\/8\" tapering to 1\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 31.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my Harley with stock hand controls?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars clamp at 1-1\/8\" but taper down to 1\" to accept stock Harley hand controls without adapters or sleeves.\u003c\/p\u003e\n\u003ch3\u003eCan I run throttle-by-wire through these bars?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars come pre-drilled with holes for internal wiring and throttle-by-wire cables, including routing through Forbidden risers.\u003c\/p\u003e\n\u003ch3\u003eWhat's the total width and rise?\u003c\/h3\u003e\n\u003cp\u003eThese bars are 32 inches wide with 3 inches of pullback and 2.5 inches of rise — a moderate hi-rise moto-style geometry.\u003c\/p\u003e\n\u003ch3\u003eDo I need to install internal cables myself?\u003c\/h3\u003e\n\u003cp\u003eThe holes are pre-drilled, but you'll route your throttle, clutch, and brake lines through the bars during installation — a basic handlebar job.\u003c\/p\u003e\n\u003ch3\u003eWhat finish is included?\u003c\/h3\u003e\n\u003cp\u003eThese bars ship in a gold anodized finish.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035901485167,"sku":"825-05064","price":140.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/e94a-60b6655f5816b.png?v=1777530153"},{"product_id":"forbidden-moto-style-hi-rise-bars-hbar-hi-rise-red-tbw-825-05065","title":"Forbidden Moto Style Hi Rise Bars - Hbar HI Rise RED TBW","description":"\u003cp\u003eForbidden Moto Style hi-rise handlebars in red, designed by Forbidden Motorcycles and manufactured by Fly Racing. These bars feature a tapered design that drops from 1-1\/8\" at the clamp to 1\" at the grip, allowing direct fitment with stock Harley hand controls without sleeving or adapters.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/8\" clamp tapers to 1\" grip diameter\u003c\/li\u003e\n  \u003cli\u003eFits stock Harley hand controls without sleeving\u003c\/li\u003e\n  \u003cli\u003ePre-drilled for internal wiring and FM riser cables\u003c\/li\u003e\n  \u003cli\u003e32\" wide with 3\" pullback and 2.5\" rise\u003c\/li\u003e\n  \u003cli\u003eRed powder-coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Forbidden Motorcycles \/ Fly Racing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e HJ2020TFMT-01RD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361290206\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 32 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePullback:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 2.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Mainland)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eCompatible with Harley-Davidson models using stock hand control mounts and throttle\/brake assemblies. Internal wiring passages allow routing through Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to sleeve these bars to fit stock Harley controls?\u003c\/h3\u003e\n\u003cp\u003eNo — the bars taper from 1-1\/8\" at the clamp to 1\" at the grip, fitting stock Harley hand controls directly without sleeving.\u003c\/p\u003e\n\u003ch3\u003eAre these bars pre-drilled for cables and wires?\u003c\/h3\u003e\n\u003cp\u003eYes — the bars are pre-drilled for internal wiring and include passages to run cables through Forbidden Motorcycles risers.\u003c\/p\u003e\n\u003ch3\u003eWhat is the overall pull and rise geometry?\u003c\/h3\u003e\n\u003cp\u003e32 inches wide, 3 inches of pullback, and 2.5 inches of rise for a forward-set moto riding position.\u003c\/p\u003e\n\u003ch3\u003eWill these work with aftermarket risers?\u003c\/h3\u003e\n\u003cp\u003eThese are designed to work with Forbidden Motorcycles risers. Compatibility with other riser brands depends on their design — confirm fitment before ordering.\u003c\/p\u003e","brand":"Forbidden","offers":[{"title":"Default Title","offer_id":53035901517935,"sku":"825-05065","price":140.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/4f6c-60b6657f7f3a9.png?v=1777530153"}],"url":"https:\/\/vtwinbikers.com\/collections\/forbidden.oembed","provider":"Vtwinbikers","version":"1.0","type":"link"}