{"title":"Rocket Performance Garage Llc","description":null,"products":[{"product_id":"rocket-performance-garage-llc-584-chain-drive-cam-cams-2007-2017-276-02003","title":"Rocket Performance Garage Llc 584 Chain Drive Cam - Cams 2007-2017 — Harley-Davidson Road King, Electra Glide Ultra Classic, Street Glide (2007-2017)","description":"\u003cp\u003eRocket Performance Garage 584 chain drive cam for Harley engines 103–107 cubic inches, delivering 0.584\" lift across a 2,000–6,000 rpm powerband. Designed for ported heads with minimum 10:1 compression; works with stock valve springs and reduces detonation risk.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e0.584\" valve lift\u003c\/li\u003e\n  \u003cli\u003e2,000–6,000 rpm effective range\u003c\/li\u003e\n  \u003cli\u003eStock valve springs compatible\u003c\/li\u003e\n  \u003cli\u003ePorted heads with 10:1+ compression recommended\u003c\/li\u003e\n  \u003cli\u003eFree-flowing air cleaner and performance exhaust recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4004\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2.3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.14 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits upgraded Harley engines 103–107 cubic inches. Recommended for ported cylinder heads with a minimum 10:1 compression ratio.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compression ratio do I need for this cam?\u003c\/h3\u003e\n\u003cp\u003eMinimum 10:1 compression ratio. Lower compression may cause detonation under load.\u003c\/p\u003e\n\u003ch3\u003eWill this fit stock 103 cubic inch engines?\u003c\/h3\u003e\n\u003cp\u003eThis cam is designed for upgraded 103–107 CI engines with performance modifications. Stock engines may not support the aggressive profile.\u003c\/p\u003e\n\u003ch3\u003eDo I need to replace my valve springs?\u003c\/h3\u003e\n\u003cp\u003eNo — this cam is engineered to work with stock valve springs, saving cost on a full upgrade.\u003c\/p\u003e\n\u003ch3\u003eWhat RPM range does this cam operate in?\u003c\/h3\u003e\n\u003cp\u003eEffective between 2,000 and 6,000 rpm. Delivers constant power across that range.\u003c\/p\u003e\n\u003ch3\u003eDo I need new exhaust and intake modifications?\u003c\/h3\u003e\n\u003cp\u003eFree-flowing air cleaner and performance exhaust are recommended to maximize power delivery and prevent detonation.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035672371311,"sku":"276-02003","price":378.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/93fa-641b634900d4d.png?v=1777529105"},{"product_id":"rocket-performance-garage-llc-574-chain-drive-cam-cams-2007-2017-276-02002","title":"Rocket Performance Garage Llc 574 Chain Drive Cam - Cams 2007-2017 — Harley-Davidson Road King, Electra Glide Ultra Classic, Street Glide (2007-2017)","description":"\u003cp\u003eRocket Performance Garage 574 Chain Drive Cam delivers .574\" lift with a broad powerband from 1,500 to 5,800 rpm, designed for street and cruising on 96\" to 107\" displacement Harley engines. Bolt-in replacement that works with stock valve springs and compression ratios up to 10:1, making it an accessible upgrade for mid-range passing power.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e.574\" valve lift\u003c\/li\u003e\n  \u003cli\u003e1,500 to 5,800 rpm powerband\u003c\/li\u003e\n  \u003cli\u003eWorks with stock valve springs\u003c\/li\u003e\n  \u003cli\u003eChain drive design\u003c\/li\u003e\n  \u003cli\u003eFits 96\" to 107\" displacement engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4003\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5.85 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9.05 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.155 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this cam work with my stock valve springs?\u003c\/h3\u003e\n\u003cp\u003eYes — the 574 cam is engineered to operate with stock Harley valve springs without modification.\u003c\/p\u003e\n\u003ch3\u003eWhat compression ratio do I need?\u003c\/h3\u003e\n\u003cp\u003eWorks best with stock compression or up to 10:1. Higher compression ratios are not recommended for this cam profile.\u003c\/p\u003e\n\u003ch3\u003eDo I need to retune my bike after installation?\u003c\/h3\u003e\n\u003cp\u003eA free-flow air cleaner and performance exhaust unlock the cam's best power; stock airbox and mufflers will still work but limit peak output.\u003c\/p\u003e\n\u003ch3\u003eWhat RPM range does this cam operate in?\u003c\/h3\u003e\n\u003cp\u003eThe powerband peaks between 1,500 and 5,800 rpm, optimized for street riding and cruising rather than high-rpm performance.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035672436847,"sku":"276-02002","price":378.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/93fa-641b634900d4d_870aa19b-981c-4aa3-87e1-230e65a2e722.png?v=1777529105"},{"product_id":"rocket-performance-garage-llc-514-chain-drive-cam-cams-1999-2006-276-02010","title":"Rocket Performance Garage Llc 514 Chain Drive Cam - Cams 1999-2006 — Harley-Davidson Road King, Road King Classic, Electra Glide (1999-2006)","description":"\u003cp\u003eRocket Performance Garage 514 Chain Drive Cam for 1999-2006 big-twin Harley engines, engineered for low-rpm torque and cruising power without high-compression heads or exotic valve springs. Delivers peak performance between 1500–5000 rpm, ideal for riders prioritizing pulling power over peak horsepower.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-rpm cruising torque profile\u003c\/li\u003e\n  \u003cli\u003eWorks with stock valve springs\u003c\/li\u003e\n  \u003cli\u003eRecommended for heavier bikes\u003c\/li\u003e\n  \u003cli\u003eCompatible with stock or 9.5:1 compression\u003c\/li\u003e\n  \u003cli\u003eChain drive design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4007\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5.95 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.76 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 1999-2006 Harley-Davidson big-twin engines. Best suited for heavier bikes running stock compression ratio or up to 9.5:1 compression ratio.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this cam require high-compression heads?\u003c\/h3\u003e\n\u003cp\u003eNo — this cam is designed for stock compression ratio or up to 9.5:1. High compression is not necessary.\u003c\/p\u003e\n\u003ch3\u003eWill I need to upgrade my valve springs?\u003c\/h3\u003e\n\u003cp\u003eNo — this cam uses stock valve springs, so no valve train upgrades are required.\u003c\/p\u003e\n\u003ch3\u003eWhat RPM range does this cam peak at?\u003c\/h3\u003e\n\u003cp\u003ePeak performance occurs between 1500 and 5000 rpm, making it ideal for cruising and low-end torque.\u003c\/p\u003e\n\u003ch3\u003eWill I need a tuner or air intake upgrade?\u003c\/h3\u003e\n\u003cp\u003eBest power is achieved with a free-flow air cleaner and performance exhaust, but the cam will function on stock components.\u003c\/p\u003e\n\u003ch3\u003eIs this cam suitable for lightweight bikes?\u003c\/h3\u003e\n\u003cp\u003eThis cam is specifically recommended for heavier bikes. Lighter bike owners should consult manufacturer fitment.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035672469615,"sku":"276-02010","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/a350-641b63db9d231.png?v=1777529106"},{"product_id":"rocket-performance-garage-llc-584-chain-drive-cam-cams-1999-2006-276-02012","title":"Rocket Performance Garage Llc 584 Chain Drive Cam - Cams 1999-2006 — Harley-Davidson Road King, Road King Classic, Electra Glide (1999-2006)","description":"\u003cp\u003eRocket Performance Garage 584 chain drive cam delivers .584\" valve lift for upgraded 103–107 cubic inch Harley engines, designed to produce consistent power across 2,000–6,000 rpm while resisting detonation. Works with stock valve springs and requires ported cylinder heads with minimum 10:1 compression ratio.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e.584 inch valve lift\u003c\/li\u003e\n  \u003cli\u003eDesigned for 103–107 cubic inch engines\u003c\/li\u003e\n  \u003cli\u003eOperates 2,000–6,000 rpm range\u003c\/li\u003e\n  \u003cli\u003eCompatible with stock valve springs\u003c\/li\u003e\n  \u003cli\u003ePorted heads and 10:1 compression recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4009\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5.9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9.05 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.69 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits upgraded Harley engines in the 103–107 cubic inch displacement range, 1999–2006 model years.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compression ratio do I need to run this cam?\u003c\/h3\u003e\n\u003cp\u003eMinimum 10:1 compression ratio with ported cylinder heads. Stock or lower compression may cause detonation.\u003c\/p\u003e\n\u003ch3\u003eCan I use this cam with stock valve springs?\u003c\/h3\u003e\n\u003cp\u003eYes. This cam is designed to work with OEM valve springs without requiring aftermarket spring kits.\u003c\/p\u003e\n\u003ch3\u003eWhat rpm range is this cam good for?\u003c\/h3\u003e\n\u003cp\u003e2,000–6,000 rpm. It delivers consistent power throughout that range and resists detonation.\u003c\/p\u003e\n\u003ch3\u003eDo I need a free-flowing air cleaner and exhaust?\u003c\/h3\u003e\n\u003cp\u003eA free-flowing air cleaner and performance exhaust system are recommended to realize the full potential of this cam.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035673256047,"sku":"276-02012","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/a350-641b63db9d231_4bc4cc61-bc6f-4896-ad85-f9f051d336a6.png?v=1777529105"},{"product_id":"rocket-performance-garage-llc-514-chain-drive-cam-cams-2007-2017-276-02004","title":"Rocket Performance Garage Llc 514 Chain Drive Cam - Cams 2007-2017 — Harley-Davidson Road King, Electra Glide Ultra Classic, Street Glide (2007-2017)","description":"\u003cp\u003eRocket Performance Garage 514 Chain Drive cam designed for cruising torque and low-rpm pulling power in 2007-2017 Harley-Davidson models. Peaks between 1500–5000 rpm and works with stock valve springs, making it an easy bolt-in upgrade for heavier bikes running stock or mild compression ratios.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-rpm torque focused (1500–5000 rpm peak)\u003c\/li\u003e\n  \u003cli\u003eWorks with stock valve springs\u003c\/li\u003e\n  \u003cli\u003eRecommended for heavier bikes\u003c\/li\u003e\n  \u003cli\u003eCompatible with stock or up to 9.5:1 compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4006\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5.9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9.05 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.25 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.025 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2007-2017 Harley-Davidson models. Recommended for heavier bikes running stock compression or up to 9.5:1 ratio.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this cam work with my stock valve springs?\u003c\/h3\u003e\n\u003cp\u003eYes — the 514 is engineered to work with factory valve springs, so you don't need additional valve-train upgrades.\u003c\/p\u003e\n\u003ch3\u003eWhat's the peak power band for this cam?\u003c\/h3\u003e\n\u003cp\u003ePeak performance occurs between 1500 and 5000 rpm, optimized for cruising torque rather than high-rpm horsepower.\u003c\/p\u003e\n\u003ch3\u003eIs this better for heavier bikes?\u003c\/h3\u003e\n\u003cp\u003eYes — low-rpm pulling power and stock compression compatibility make it ideal for larger, heavier Harley cruisers.\u003c\/p\u003e\n\u003ch3\u003eDo I need to retune my ECM?\u003c\/h3\u003e\n\u003cp\u003eRocket recommends pairing this cam with a free-flow air cleaner and performance exhaust for best results. ECM tuning may vary by setup.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035673288815,"sku":"276-02004","price":378.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/93fa-641b634900d4d_95ea1b51-88b3-412f-96d8-99c10501167c.png?v=1777529106"},{"product_id":"rocket-performance-garage-llc-554-chain-drive-cam-cams-1999-2006-276-02011","title":"Rocket Performance Garage Llc 554 Chain Drive Cam - Cams 1999-2006 — Harley-Davidson Road King, Road King Classic, Electra Glide (1999-2006)","description":"\u003cp\u003eRocket Performance Garage 554 Chain Drive cam for Harley Twin Cam engines, engineered to deliver peak power from 1500 to 5800 rpm. Works with stock valve springs and compression ratios up to 10:1, and produces best results paired with a free-flow air cleaner and performance exhaust system.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePeak power 1500–5800 rpm\u003c\/li\u003e\n  \u003cli\u003eWorks with stock valve springs\u003c\/li\u003e\n  \u003cli\u003eFits 88″ to 107″ displacement engines\u003c\/li\u003e\n  \u003cli\u003eRecommended with free-flow air cleaner and performance exhaust\u003c\/li\u003e\n  \u003cli\u003eMid-range passing power focus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4008\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5.95 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.67 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley Twin Cam engines 1999–2006 with 88″ to 107″ displacement. NOT FOR USE IN CALIFORNIA.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to replace my valve springs?\u003c\/h3\u003e\n\u003cp\u003eNo — this cam uses stock Harley valve springs, so spring replacement is not required.\u003c\/p\u003e\n\u003ch3\u003eWhat compression ratio does this cam work with?\u003c\/h3\u003e\n\u003cp\u003eStock compression or up to 10:1. It will work across that full range.\u003c\/p\u003e\n\u003ch3\u003eWhat intake and exhaust setup do you recommend?\u003c\/h3\u003e\n\u003cp\u003eBest power comes with a free-flow air cleaner and performance exhaust. Stock components will work but limit peak gains.\u003c\/p\u003e\n\u003ch3\u003eIs this legal in California?\u003c\/h3\u003e\n\u003cp\u003eNo — this cam is NOT approved for use in California.\u003c\/p\u003e\n\u003ch3\u003eWill this fit my 2007+ Harley?\u003c\/h3\u003e\n\u003cp\u003eNo — this part is for 1999–2006 Twin Cam models only.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035673387119,"sku":"276-02011","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/a350-641b63db9d231_96203a21-f4dd-4b41-8c10-b9edf99bf2fb.png?v=1777529107"},{"product_id":"rocket-performance-garage-llc-chris-rivas-444-camshaft-grind-cam-m8-2017-2024-276-02030","title":"Rocket Performance Garage Llc Chris Rivas 444 Camshaft - Grind CAM M8 2017-2024… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage 444 camshaft designed for Harley Milwaukee-Eight four-valve engines. This direct bolt-in cam delivers increased power from idle through 5,500 RPM with aggressive low-end torque and acceleration compared to stock.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-in installation on M8 four-valve engines\u003c\/li\u003e\n  \u003cli\u003ePower delivery from idle to 5,500 RPM\u003c\/li\u003e\n  \u003cli\u003eAggressive low-end torque and acceleration\u003c\/li\u003e\n  \u003cli\u003eOptimized for smaller multivalve ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4024\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Milwaukee-Eight (M8) engines with four-valve configuration, 2017-2024 model years. Not legal for use in California.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs this a direct bolt-in, or do I need machine work?\u003c\/h3\u003e\n\u003cp\u003eDirect bolt-in to M8 engines. No additional modifications required for installation.\u003c\/p\u003e\n\u003ch3\u003eWhat's the peak power band for the 444 grind?\u003c\/h3\u003e\n\u003cp\u003eThis cam produces strong power from idle through 5,500 RPM with emphasis on low-end torque and acceleration.\u003c\/p\u003e\n\u003ch3\u003eCan I use this cam in California?\u003c\/h3\u003e\n\u003cp\u003eNo — this camshaft is not street-legal in California. It is for off-road or enclosed course use only in that state.\u003c\/p\u003e\n\u003ch3\u003eIs this compatible with twin-cam engines?\u003c\/h3\u003e\n\u003cp\u003eNo — the 444 is designed exclusively for Milwaukee-Eight four-valve engines, not Twin Cam models.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035820286063,"sku":"276-02030","price":258.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_97e9554b-3f88-4ded-8824-5e573d7093ef.png?v=1779563175"},{"product_id":"rocket-performance-garage-llc-chris-rivas-464-camshaft-grind-cam-m8-2017-2024-276-02031","title":"Rocket Performance Garage Llc Chris Rivas 464 Camshaft - Grind CAM M8 2017-2024… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage Chris Rivas 464 camshaft for Milwaukee-Eight (M8) four-valve engines, engineered to unlock midrange torque and acceleration in 107 and 114 cubic-inch displacements. This bolt-in cam delivers power from 1500 to 5800 RPM with aggressive lobe profiles designed specifically for four-valve port geometry.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-in installation, no modification required\u003c\/li\u003e\n  \u003cli\u003eOptimized for 107 and 114 cu in M8 engines\u003c\/li\u003e\n  \u003cli\u003eMidrange torque and acceleration focused\u003c\/li\u003e\n  \u003cli\u003ePower band 1500–5800 RPM\u003c\/li\u003e\n  \u003cli\u003eChris Rivas four-valve profile design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4025\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Milwaukee-Eight (M8) four-valve engines, 2017–2024 model years. Not legal for use in California.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my M8 Touring or Softail?\u003c\/h3\u003e\n\u003cp\u003eYes — any 2017-2024 M8 engine with four-valve heads will accept this bolt-in cam.\u003c\/p\u003e\n\u003ch3\u003eIs this cam street legal everywhere?\u003c\/h3\u003e\n\u003cp\u003eNo — this cam is not legal for use in California. All other states follow federal emissions rules.\u003c\/p\u003e\n\u003ch3\u003eWhat displacement engines work best with the 464?\u003c\/h3\u003e\n\u003cp\u003eOptimized for 107 and 114 cubic-inch M8 engines. The 544 profile is recommended for larger displacement builds.\u003c\/p\u003e\n\u003ch3\u003eDo I need tuning with this cam?\u003c\/h3\u003e\n\u003cp\u003eCamshaft changes typically require fuel-air tuning to optimize performance and maintain drivability across the RPM range.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035820318831,"sku":"276-02031","price":258.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/6539-5b06f6096c67d.jpg?v=1777529495"},{"product_id":"rocket-performance-garage-llc-chris-rivas-474-camshaft-grind-cam-m8-2017-2024-276-02032","title":"Rocket Performance Garage Llc Chris Rivas 474 Camshaft - Grind CAM M8 2017-2024… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage Chris Rivas 474 camshaft designed for Milwaukee-Eight four-valve engines, engineered to deliver torque and power across the 1800–6000 rpm band. A direct bolt-in upgrade for 114+ cubic inch motors with added compression.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-in installation\u003c\/li\u003e\n  \u003cli\u003eDelivers torque 1800–6000 rpm range\u003c\/li\u003e\n  \u003cli\u003eOptimized for four-valve M8 port geometry\u003c\/li\u003e\n  \u003cli\u003eDesigned for 114+ cubic inch displacement\u003c\/li\u003e\n  \u003cli\u003eNOT FOR USE IN CALIFORNIA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4026\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrind:\u003c\/strong\u003e 474\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Milwaukee-Eight (M8)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplacement Target:\u003c\/strong\u003e 114+ cubic inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2017-2024 Milwaukee-Eight engines in Harley-Davidson Touring, Cruiser, and Softail models. For use in engines with 114 cubic inches or larger displacement and added compression.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this cam fit my Twin Cam engine?\u003c\/h3\u003e\n\u003cp\u003eNo — this 474 cam is designed specifically for four-valve Milwaukee-Eight engines. Twin Cam models require a different cam profile.\u003c\/p\u003e\n\u003ch3\u003eDo I need to add compression to run this cam?\u003c\/h3\u003e\n\u003cp\u003eThis cam is engineered for engines with added compression (114+ cubic inches). Stock displacement engines may not see optimal results.\u003c\/p\u003e\n\u003ch3\u003eIs this street legal in all states?\u003c\/h3\u003e\n\u003cp\u003eNo — this cam is NOT FOR USE IN CALIFORNIA due to emissions regulations. All other U.S. states and territories are eligible.\u003c\/p\u003e\n\u003ch3\u003eWhat's the power band like on the 474 grind?\u003c\/h3\u003e\n\u003cp\u003eThe 474 is tuned to deliver strong torque and power from 1800 rpm through 6000 rpm, ideal for cruising and rolling acceleration.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035820351599,"sku":"276-02032","price":258.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/6539-5b06f6096c67d_50904df3-7cfe-49d5-b040-645ec77dbcd9.jpg?v=1777529495"},{"product_id":"rocket-performance-garage-llc-chris-rivas-544-camshaft-grind-cam-m8-2017-2024-276-02033","title":"Rocket Performance Garage Llc Chris Rivas 544 Camshaft - Grind CAM M8 2017-2024… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage LLC Chris Rivas 544 camshaft for Milwaukee-Eight engines, engineered for 114+ cubic inch displacement and high-compression builds. This aggressive lobe profile delays torque onset to mid-RPM while extending horsepower further, making it ideal for ported heads and large-displacement motors that demand high-lift valve springs.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAggressive lobe profile for 114+ cubic inch engines\u003c\/li\u003e\n  \u003cli\u003eTorque delivery from 2000–6200 RPM\u003c\/li\u003e\n  \u003cli\u003eDesigned for high-compression pistons and ported cylinder heads\u003c\/li\u003e\n  \u003cli\u003eRequires high-lift valve springs\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-in installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 4-4027\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Milwaukee-Eight (M8) engines in 2017–2024 models with 114+ cubic inch displacement. NOT FOR USE IN CALIFORNIA.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the 544 and the 444\/464\/474 cams?\u003c\/h3\u003e\n\u003cp\u003eThe 544 is the most aggressive profile, designed for big-inch builds. The 444, 464, and 474 are lower-lift options for smaller displacement applications.\u003c\/p\u003e\n\u003ch3\u003eDo I need to upgrade my valve springs?\u003c\/h3\u003e\n\u003cp\u003eYes — high-lift valve springs are required with this camshaft to prevent valve float and ensure proper seating.\u003c\/p\u003e\n\u003ch3\u003eWhat compression ratio do I need?\u003c\/h3\u003e\n\u003cp\u003eThis cam is optimized for high-compression pistons. Check your builder's recommendation for your specific displacement and port configuration.\u003c\/p\u003e\n\u003ch3\u003eCan I use this cam in California?\u003c\/h3\u003e\n\u003cp\u003eNo — this camshaft is not for use in California due to emissions regulations.\u003c\/p\u003e\n\u003ch3\u003eWhat RPM range does this cam work best in?\u003c\/h3\u003e\n\u003cp\u003ePeak power delivery occurs between 2000 and 6200 RPM, making it ideal for big-displacement cruiser and touring builds.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035820384367,"sku":"276-02033","price":258.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/6539-5b06f6096c67d_da459c54-5659-4aaf-a01e-49a8d218eeba.jpg?v=1777529495"},{"product_id":"rocket-performance-garage-llc-speedy-pushrod-kits-kit-w-covers-chrome-tc-199-276-02053","title":"Rocket Performance Garage Llc Speedy Pushrod Kits - KIT W\/Covers Chrome, TC 199… — Harley-Davidson (1999-2017)","description":"\u003cp\u003eRocket Performance Garage Speedy pushrod kit with chrome covers for Twin Cam engines, featuring threaded adjusters that screw into chromoly steel pushrods for tool-free installation and removal without dropping the gas tank or removing rocker covers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChromoly steel construction reduces flex\u003c\/li\u003e\n  \u003cli\u003eThreaded adjusters screw in and slide out\u003c\/li\u003e\n  \u003cli\u003eNo gas tank or rocker removal required\u003c\/li\u003e\n  \u003cli\u003eWorks with stock and aftermarket cams\u003c\/li\u003e\n  \u003cli\u003eChrome covers included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 6-6004\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo these pushrods work with my aftermarket cam?\u003c\/h3\u003e\n\u003cp\u003eYes — Speedy pushrods are compatible with stock Harley cams and most popular aftermarket cams. Verify your cam specs if unsure.\u003c\/p\u003e\n\u003ch3\u003eDo I need to remove my gas tank to install these?\u003c\/h3\u003e\n\u003cp\u003eNo. The threaded adjuster design allows installation and removal without dropping the tank, rocker assemblies, or rocker box cover.\u003c\/p\u003e\n\u003ch3\u003eHow do the adjusters work?\u003c\/h3\u003e\n\u003cp\u003eThe adjuster screw threads into the pushrod until the threads disengage, then slides freely in and out — no tools required to remove or reinstall.\u003c\/p\u003e\n\u003ch3\u003eWhat are these pushrods made of?\u003c\/h3\u003e\n\u003cp\u003eChromoly steel, which is stronger and more resistant to flex than stock steel, improving durability under high rpm and boost.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035862130799,"sku":"276-02053","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_ae777a46-2efb-454b-9721-b7f835d703e4.png?v=1779563250"},{"product_id":"rocket-performance-garage-llc-speedy-pushrod-kits-kit-w-covers-chrome-m8-201-276-02054","title":"Rocket Performance Garage Llc Speedy Pushrod Kits - KIT W\/Covers Chrome, M8 201… — Harley-Davidson (2017-2026)","description":"\u003cp\u003eRocket Performance Garage Speedy Pushrod Kit with chrome covers for Harley Milwaukee-Eight engines. Features chromoly steel construction with a threaded adjuster design that slides into the pushrod for installation and removal without dropping the fuel tank or rocker box cover.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChromoly steel construction reduces pushrod flex\u003c\/li\u003e\n  \u003cli\u003eThreaded adjuster design for tool-free installation\u003c\/li\u003e\n  \u003cli\u003eNo fuel tank or rocker cover removal required\u003c\/li\u003e\n  \u003cli\u003eWorks with stock and aftermarket cams\u003c\/li\u003e\n  \u003cli\u003eChrome covers included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 6-6005\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to remove my fuel tank to install these?\u003c\/h3\u003e\n\u003cp\u003eNo — the threaded adjuster design allows installation and removal without dropping the tank, rocker assemblies, or rocker box cover.\u003c\/p\u003e\n\u003ch3\u003eWill these work with my aftermarket cam?\u003c\/h3\u003e\n\u003cp\u003eYes — Speedy pushrods are compatible with stock Harley cams and most popular aftermarket cam profiles.\u003c\/p\u003e\n\u003ch3\u003eWhat material are these made from?\u003c\/h3\u003e\n\u003cp\u003eChromoly steel construction, chosen for strength and reduced flex under high-rpm operation.\u003c\/p\u003e\n\u003ch3\u003eIs this a complete kit?\u003c\/h3\u003e\n\u003cp\u003eYes — kit includes pushrods with chrome covers and all adjuster hardware needed for M8 installation.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035862163567,"sku":"276-02054","price":339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_dc8113b1-ef0e-4595-8af4-874e9dacda2c.png?v=1779563535"},{"product_id":"rocket-performance-garage-llc-lifter-set-tc-1999-2017-m8-2017-2024-exc-vvt-276-02070","title":"Rocket Performance Garage Llc Lifter - SET TC 1999-2017, M8 2017-2024 (exc.vvt) — Harley-Davidson (1999-2024)","description":"\u003cp\u003eRocket Performance Garage lifter set for Twin Cam and Milwaukee-Eight V-twin engines, designed as a direct OEM replacement to restore proper valve actuation and eliminate noise from worn lifters.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Twin Cam 1999-2017 engines\u003c\/li\u003e\n  \u003cli\u003eFits Milwaukee-Eight 2017-2024 (excluding VVT models)\u003c\/li\u003e\n  \u003cli\u003eOEM-specification replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 6-6007\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Twin Cam engines 1999-2017 and Milwaukee-Eight engines 2017-2024, excluding VVT (variable valve timing) models.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Milwaukee-Eight with VVT?\u003c\/h3\u003e\n\u003cp\u003eNo — this lifter set does not fit Milwaukee-Eight VVT models. Check your engine documentation to confirm if your M8 has variable valve timing.\u003c\/p\u003e\n\u003ch3\u003eDo I need to replace all lifters or just the worn ones?\u003c\/h3\u003e\n\u003cp\u003eReplacing the entire set at once ensures consistent valve action across all cylinders and prevents future noise and wear.\u003c\/p\u003e\n\u003ch3\u003eWhat symptoms indicate I need new lifters?\u003c\/h3\u003e\n\u003cp\u003eValve train noise (ticking or knocking), rough idle, or loss of compression can indicate worn or loose lifters.\u003c\/p\u003e\n\u003ch3\u003eCan I install these myself?\u003c\/h3\u003e\n\u003cp\u003eLifter replacement requires removal of the cam cover and camshaft — most riders consult a technician for proper installation and timing.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035862229103,"sku":"276-02070","price":269.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_67abd347-d121-435e-bf1e-6baf86b9352a.png?v=1779563599"},{"product_id":"rocket-performance-garage-llc-cam-install-kit-chain-drive-tc-2007-2017-276-02080","title":"Rocket Performance Garage Llc Cam Install Kit - Chain Drive TC 2007-2017 — Harley-Davidson (2007-2017)","description":"\u003cp\u003eRocket Performance Garage cam install kit for Twin Cam chain-drive engines in 2007-2017 Harley-Davidson models. Supplies the specialized tools and hardware needed to safely install camshaft upgrades without pulling the engine from the frame.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Twin Cam chain-drive engines\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware and alignment tools included\u003c\/li\u003e\n  \u003cli\u003eSupports 2007-2017 model year Harley models\u003c\/li\u003e\n  \u003cli\u003eEnables in-frame cam installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 7-7002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 10 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Twin Cam chain-drive engines in 2007-2017 Harley-Davidson models. Will not work on belt-drive or Milwaukee-Eight engines.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eCan I install a new cam without removing my engine?\u003c\/h3\u003e\n\u003cp\u003eYes — this kit is designed specifically to allow in-frame cam installation on Twin Cam chain-drive engines.\u003c\/p\u003e\n\u003ch3\u003eWill this work on my 2006 or older Harley?\u003c\/h3\u003e\n\u003cp\u003eNo — this kit is for 2007-2017 Twin Cam models only. Earlier or newer model years use different engine architecture.\u003c\/p\u003e\n\u003ch3\u003eDoes this fit belt-drive Harley models?\u003c\/h3\u003e\n\u003cp\u003eNo — this kit is for chain-drive Twin Cam engines only. Belt-drive Harleys require a different approach.\u003c\/p\u003e\n\u003ch3\u003eWhat's included in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation hardware and specialized alignment tools needed to safely install aftermarket camshafts in-frame.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035862261871,"sku":"276-02080","price":64.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_864d5312-a0a5-4906-8e98-115936f642a9.png?v=1779563434"},{"product_id":"rocket-performance-garage-llc-cam-install-kit-chain-drive-m8-models-276-02081","title":"Rocket Performance Garage Llc Cam Install Kit - Chain Drive M8 Models — Harley-Davidson (2017-2026)","description":"\u003cp\u003eRocket Performance Garage LLC cam install kit for Milwaukee-Eight chain drive engines, containing specialized tools and hardware to service camshaft assemblies without engine removal. Enables in-frame cam work on M8 chain drive motors.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMilwaukee-Eight (M8) chain drive engines\u003c\/li\u003e\n  \u003cli\u003eCam installation tools included\u003c\/li\u003e\n  \u003cli\u003eHardware included for reassembly\u003c\/li\u003e\n  \u003cli\u003eIn-frame installation capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 7-7001\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 10 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Milwaukee-Eight chain drive engines. Not compatible with M8 belt drive models or Twin Cam engines.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this work on belt drive M8 engines?\u003c\/h3\u003e\n\u003cp\u003eNo — this kit is specifically for Milwaukee-Eight chain drive engines only. Belt drive M8 models require different tooling.\u003c\/p\u003e\n\u003ch3\u003eCan I install cams without pulling the engine?\u003c\/h3\u003e\n\u003cp\u003eYes. The kit is designed to allow in-frame camshaft installation and removal without engine removal.\u003c\/p\u003e\n\u003ch3\u003eWhat's included in the kit?\u003c\/h3\u003e\n\u003cp\u003eCam installation tools and hardware needed to service camshaft assemblies on M8 chain drive engines.\u003c\/p\u003e\n\u003ch3\u003eWill this fit Twin Cam engines?\u003c\/h3\u003e\n\u003cp\u003eNo — this kit is M8-specific. Twin Cam cam service requires different tools and procedures.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035862294639,"sku":"276-02081","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_5a76ccb1-a719-410a-8c94-6228cfee4960.png?v=1779563544"},{"product_id":"rocket-performance-garage-llc-performance-clutch-kit-evo-bt-1990-1997-xl-1991-276-02090","title":"Rocket Performance Garage Llc Performance Clutch Kit - EVO BT 1990-1997 XL 1991… — Harley-Davidson (1990-2020)","description":"\u003cp\u003eRocket Performance Garage performance clutch kit for Harley-Davidson Sportster EVO and Sportster XL models. Engineered to handle higher power output and deliver crisp engagement for riders looking to upgrade from stock.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePerformance-tuned clutch assembly\u003c\/li\u003e\n  \u003cli\u003eDirect fit for EVO and XL Sportster engines\u003c\/li\u003e\n  \u003cli\u003eImproved engagement feel versus stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 41-4000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Sportster EVO models 1990-1997 and Sportster XL models 1991-2020.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my 1995 Sportster?\u003c\/h3\u003e\n\u003cp\u003eYes — this kit fits all EVO Sportster models from 1990-1997, and XL Sportster models from 1991 onward.\u003c\/p\u003e\n\u003ch3\u003eIs this a complete clutch kit?\u003c\/h3\u003e\n\u003cp\u003eYes — Rocket Performance Garage bundles the clutch plates, springs, and necessary hardware as a complete replacement assembly.\u003c\/p\u003e\n\u003ch3\u003eDo I need to adjust my cables after installation?\u003c\/h3\u003e\n\u003cp\u003eAfter installation, clutch cable free-play should be set to factory spec (typically 1\/8 to 1\/4 inch). Consult your service manual for exact adjustment.\u003c\/p\u003e\n\u003ch3\u003eWill this improve my Sportster's pulling power?\u003c\/h3\u003e\n\u003cp\u003eA performance clutch improves engagement bite and holds higher power better than stock, but does not increase engine horsepower on its own.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035890606191,"sku":"276-02090","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/31b3-5f3ea75c5e231.jpg?v=1777530075"},{"product_id":"rocket-performance-garage-llc-performance-clutch-w-extra-plate-evo-bt-1990-19-276-02091","title":"Rocket Performance Garage Llc Performance Clutch W\/Extra Plate - EVO BT 1990-19… — Harley-Davidson (1990-2020)","description":"\u003cp\u003eRocket Performance Garage performance clutch with extra plate for Harley-Davidson Sportster EVO models. Engineered for stronger engagement and slip-free power delivery across the RPM range.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra friction plate included\u003c\/li\u003e\n  \u003cli\u003eDesigned for EVO V-twin engines\u003c\/li\u003e\n  \u003cli\u003eDirect fit into stock clutch housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 41-4001\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Sportster (XL) models 1990-2020 with EVO engines.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Sportster?\u003c\/h3\u003e\n\u003cp\u003eYes — this clutch fits 1990-2020 Harley-Davidson Sportster (XL) models with EVO powerplants.\u003c\/p\u003e\n\u003ch3\u003eWhat does the extra plate do?\u003c\/h3\u003e\n\u003cp\u003eThe extra friction plate increases holding capacity and reduces clutch slip under load, ideal for modified or high-output engines.\u003c\/p\u003e\n\u003ch3\u003eIs installation difficult?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic hand tools and mechanical knowledge. A shop can install it in under an hour if you're not comfortable doing it yourself.\u003c\/p\u003e\n\u003ch3\u003eWill this work on a Twin Cam Sportster?\u003c\/h3\u003e\n\u003cp\u003eNo — this clutch is for EVO-engine Sportsters only. Twin Cam models (2004+) require a different clutch assembly.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035890638959,"sku":"276-02091","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_10919a5c-06e5-40bd-99d8-066379e8cc07.png?v=1779564989"},{"product_id":"rocket-performance-garage-llc-performance-clutch-kit-twin-cam-bt-1998-2017-ex-276-02092","title":"Rocket Performance Garage Llc Performance Clutch Kit - Twin CAM\/BT 1998-2017 EX… — Harley-Davidson (1998-2017)","description":"\u003cp\u003eRocket Performance Garage Llc Performance Clutch Kit for Twin Cam and Big Twin engines, 1998-2017. Engineered to improve clutch engagement and holding power for street and light performance riding.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved clutch engagement\u003c\/li\u003e\n  \u003cli\u003eEnhanced holding power\u003c\/li\u003e\n  \u003cli\u003eCompact 7.5 in x 7.5 in x 2 in design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 41-4002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Twin Cam and Big Twin engines, 1998-2017 model years.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my 2018+ Big Twin?\u003c\/h3\u003e\n\u003cp\u003eNo — this kit is designed for 1998-2017 Twin Cam and Big Twin engines. 2018+ models require a different clutch kit.\u003c\/p\u003e\n\u003ch3\u003eDoes this require any special installation tools?\u003c\/h3\u003e\n\u003cp\u003eStandard clutch installation tools are recommended. Consult the included instructions or your Harley service manual for step-by-step guidance.\u003c\/p\u003e\n\u003ch3\u003eWill this improve my clutch feel on the street?\u003c\/h3\u003e\n\u003cp\u003eYes — the performance design improves engagement feel and holding power for daily riding and light performance use.\u003c\/p\u003e\n\u003ch3\u003eCan I use this for drag racing or heavy-duty performance?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered for street and light performance riding. Extreme racing applications may require a different specification.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035890671727,"sku":"276-02092","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/3c4b-5f3ea807a22dd.jpg?v=1777530076"},{"product_id":"rocket-performance-garage-llc-performance-clutch-w-extra-plate-twin-cam-bt-19-276-02093","title":"Rocket Performance Garage Llc Performance Clutch W\/Extra Plate - Twin CAM\/BT 19… — Harley-Davidson (1984-2017)","description":"\u003cp\u003eRocket Performance Garage performance clutch with an extra friction plate for Twin Cam and Evo-based V-twin motorcycles. Designed to hold engagement longer and handle higher torque loads compared to stock clutches.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra friction plate for increased holding power\u003c\/li\u003e\n  \u003cli\u003eBuilt for Twin Cam and Evo V-twin engines\u003c\/li\u003e\n  \u003cli\u003eImproved torque capacity over stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 41-4003\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits V-twin motorcycles with Twin Cam and Evo-based engines, including Harley-Davidson and Indian models.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Harley Softail?\u003c\/h3\u003e\n\u003cp\u003eYes, if your Softail runs a Twin Cam or Evo engine. Milwaukee-Eight (M8) models require a different clutch.\u003c\/p\u003e\n\u003ch3\u003eWhat's the extra plate for?\u003c\/h3\u003e\n\u003cp\u003eThe additional friction plate increases clamping force, allowing the clutch to handle more horsepower and torque without slipping.\u003c\/p\u003e\n\u003ch3\u003eDo I need to adjust my cables after installation?\u003c\/h3\u003e\n\u003cp\u003eYes — clutch cable tension will need adjustment during installation to ensure proper engagement and disengagement.\u003c\/p\u003e\n\u003ch3\u003eIs this a direct bolt-on replacement?\u003c\/h3\u003e\n\u003cp\u003eIt bolts into the stock clutch basket. Verify your engine type (Twin Cam, Evo, or M8) before ordering, as each requires a different part number.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035890737263,"sku":"276-02093","price":271.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_a6501d2a-41a2-4175-9087-5212e6f9191d.png?v=1779563410"},{"product_id":"rocket-performance-garage-llc-performance-clutch-kit-m8-2017-2024-and-tc-2013-2-276-02094","title":"Rocket Performance Garage Llc Performance Clutch Kit - M8 2017-2024 \u0026 TC 2013-2… — Harley-Davidson (2013-2024)","description":"\u003cp\u003eRocket Performance Garage LLC performance clutch kit for Milwaukee-Eight and Twin Cam engines, engineered to deliver improved bite and smoother engagement for street and light performance riding. Direct-fit replacement that optimizes clutch feel without requiring engine modifications.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePerformance-tuned clutch components\u003c\/li\u003e\n  \u003cli\u003eDirect fit M8 and Twin Cam engines\u003c\/li\u003e\n  \u003cli\u003eImproved bite and smoother engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 41-4004\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson models equipped with Milwaukee-Eight (M8) engines 2017-2024 and Twin Cam engines 2013 and newer.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Milwaukee-Eight Harley?\u003c\/h3\u003e\n\u003cp\u003eYes — this kit fits all M8 models from 2017 forward.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with Twin Cam engines?\u003c\/h3\u003e\n\u003cp\u003eYes — compatible with Twin Cam engines 2013 and newer.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require special tools?\u003c\/h3\u003e\n\u003cp\u003eStandard clutch removal and installation tools are sufficient. Consult your service manual for step-by-step procedures.\u003c\/p\u003e\n\u003ch3\u003eWill this improve my clutch feel?\u003c\/h3\u003e\n\u003cp\u003eThis kit is tuned for improved bite and smoother engagement compared to stock, giving you better control on the street and lighter performance riding.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035890770031,"sku":"276-02094","price":293.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/0c12-5f3ea842d47c3.jpg?v=1777530076"},{"product_id":"rocket-performance-garage-llc-performance-air-cleaner-kit-m8-2014-2024-exc-v-276-02200","title":"Rocket Performance Garage Llc Performance Air Cleaner Kit - M8 2014-2024 (exc.v…","description":"\u003cp\u003eRocket Performance Garage performance air cleaner kit for M8 Harley-Davidson models 2014–2024, designed to increase airflow and net 10–15% performance gains. Kit includes a one-piece backing plate, high-flow air filter element, and face plate for direct installation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-flow air filter element\u003c\/li\u003e\n  \u003cli\u003eOne-piece backing plate design\u003c\/li\u003e\n  \u003cli\u003eFace plate included\u003c\/li\u003e\n  \u003cli\u003e10–15% performance increase claimed\u003c\/li\u003e\n  \u003cli\u003eBudget-friendly option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 9-9001\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 10.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 8.75 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Milwaukee-Eight (M8) Harley-Davidson models 2014–2024.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's included in the kit?\u003c\/h3\u003e\n\u003cp\u003eOne-piece backing plate, high-flow air filter element, and face plate — everything needed for installation.\u003c\/p\u003e\n\u003ch3\u003eWill this fit my 2014+ Harley M8?\u003c\/h3\u003e\n\u003cp\u003eYes — this kit is designed for Milwaukee-Eight models 2014 through 2024.\u003c\/p\u003e\n\u003ch3\u003eDoes this require a tuner or fuel mapping?\u003c\/h3\u003e\n\u003cp\u003eInstallation details and any tuning requirements should be confirmed with the manufacturer or installer.\u003c\/p\u003e\n\u003ch3\u003eHow much performance increase should I expect?\u003c\/h3\u003e\n\u003cp\u003eRocket Performance Garage claims a 10–15% performance increase with this air cleaner upgrade.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035924357231,"sku":"276-02200","price":318.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/fc7b-5fe222e01c80f.jpg?v=1777530359"},{"product_id":"rocket-performance-garage-llc-performance-air-cleaner-kit-touring-2008-2017-276-02201","title":"Rocket Performance Garage Llc Performance Air Cleaner Kit - Touring 2008-2017","description":"\u003cp\u003eRocket Performance Garage performance air cleaner kit for V-twin motorcycles, designed to increase intake flow and net 10–15% performance gains. Includes high-flow filter element, one-piece backing plate, and face plate ready to bolt on.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-flow air filter element\u003c\/li\u003e\n  \u003cli\u003eOne-piece backing plate construction\u003c\/li\u003e\n  \u003cli\u003eFace plate included\u003c\/li\u003e\n  \u003cli\u003e10–15% performance increase claimed\u003c\/li\u003e\n  \u003cli\u003eBudget-friendly option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 9-9002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 10.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 8.75 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits V-twin motorcycles, including Harley-Davidson and Indian Motorcycle models.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's included in this kit?\u003c\/h3\u003e\n\u003cp\u003eOne high-flow air filter element, one-piece backing plate, and face plate — everything needed for installation.\u003c\/p\u003e\n\u003ch3\u003eHow much horsepower will I gain?\u003c\/h3\u003e\n\u003cp\u003eRocket Performance claims a 10–15% performance increase with this air cleaner. Actual gains depend on engine tune and other modifications.\u003c\/p\u003e\n\u003ch3\u003eWill this work on my specific Harley or Indian model?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for V-twin engines. Verify fitment with your engine displacement and intake configuration before ordering.\u003c\/p\u003e\n\u003ch3\u003eDo I need any other parts to install this?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes all components shown. Check that your motorcycle's air intake mounting points match this backing plate design.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035924389999,"sku":"276-02201","price":318.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/fc7b-641b667075d17.jpg?v=1777530358"},{"product_id":"rocket-performance-garage-llc-performance-air-cleaner-kit-cv-and-delphi-efi-n-276-02202","title":"Rocket Performance Garage Llc Performance Air Cleaner Kit - CV AND Delphi EFI N…","description":"\u003cp\u003eRocket Performance Garage performance air cleaner kit for V-twin motorcycles, engineered to increase airflow and deliver 10–15% performance gains. Kit includes a High Flo air filter element, one-piece backing plate, and face plate — ready to bolt on.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh Flo air filter element\u003c\/li\u003e\n  \u003cli\u003eOne-piece backing plate design\u003c\/li\u003e\n  \u003cli\u003eFace plate included\u003c\/li\u003e\n  \u003cli\u003e10–15% performance increase claimed\u003c\/li\u003e\n  \u003cli\u003eDimensions: 4.5 in L × 10.5 in W × 8.75 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 9-9003\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 10.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 8.75 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits V-twin motorcycles. Verify compatibility with your specific make and model before ordering.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's included in the kit?\u003c\/h3\u003e\n\u003cp\u003eOne High Flo air filter element, one-piece backing plate, and face plate with all mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eHow much power gain can I expect?\u003c\/h3\u003e\n\u003cp\u003eRocket Performance Garage claims a 10–15% performance increase with this air cleaner on a dyno-tested basis.\u003c\/p\u003e\n\u003ch3\u003eWill I need a tuner or fuel map adjustment?\u003c\/h3\u003e\n\u003cp\u003eInstallation specifics vary by bike. Check with Rocket Performance Garage or your tuner to confirm if remapping is needed for your V-twin.\u003c\/p\u003e\n\u003ch3\u003eIs this a direct-fit replacement for my stock air cleaner?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for V-twin motorcycles, but fitment depends on your specific model. Confirm your bike's compatibility before purchase.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035924455535,"sku":"276-02202","price":318.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/fc7b-641b667075d17_c8e00f05-fd33-4375-a256-566841e3111b.jpg?v=1777530359"},{"product_id":"rocket-performance-garage-llc-optional-hi-flo-filter-kit-1-taller-276-02206","title":"Rocket Performance Garage Llc Optional Hi-Flo Filter Kit - 1\" Taller","description":"\u003cp\u003eRocket Performance Garage Hi-Flo filter kit stands 1 inch taller than stock to increase air intake volume for V-twin motorcycles. Direct replacement element designed for higher airflow while maintaining filtration.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 inch taller than stock filter\u003c\/li\u003e\n  \u003cli\u003eHi-Flo element design\u003c\/li\u003e\n  \u003cli\u003eDirect replacement fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 9-9006\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 6.3 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 3.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6.5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.74 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits V-twin motorcycles with compatible airbox designs. Verify fitment with your specific model before ordering.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow much taller is this filter than stock?\u003c\/h3\u003e\n\u003cp\u003eThis filter stands 1 inch taller than the OEM element to increase air intake volume.\u003c\/p\u003e\n\u003ch3\u003eWill this fit my airbox without modifications?\u003c\/h3\u003e\n\u003cp\u003eThis is a direct replacement element. Confirm compatibility with your specific V-twin model before ordering.\u003c\/p\u003e\n\u003ch3\u003eDoes the increased height affect air intake performance?\u003c\/h3\u003e\n\u003cp\u003eYes — the taller design increases airflow volume compared to stock while maintaining filtration efficiency.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035924488303,"sku":"276-02206","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_60c26d40-bc4d-43ac-b1cd-bab115f40d38.png?v=1779563982"},{"product_id":"rocket-performance-garage-llc-big-bore-cylinder-kits-kit-128-m8-2017-2024-e-276-02060","title":"Rocket Performance Garage Llc Big Bore Cylinder Kits - KIT 128\" M8 2017-2024 (e… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage 128cc big bore cylinder kit for 2017-2024 Harley Milwaukee-Eight engines, displacing the M8 from 107cc to 128cc. Includes USA-made cylinders and Wiseco forged pistons matched for reliable power gains and street rideability.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases M8 displacement to 128cc\u003c\/li\u003e\n  \u003cli\u003e10.5:1 compression ratio\u003c\/li\u003e\n  \u003cli\u003eWiseco forged pistons included\u003c\/li\u003e\n  \u003cli\u003eUSA-manufactured cylinders\u003c\/li\u003e\n  \u003cli\u003eBlack powder-coated finish with machined fins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 8-8102\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplacement Increase:\u003c\/strong\u003e 107cc to 128cc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e 10.5:1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePiston Type:\u003c\/strong\u003e Wiseco forged\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 20 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2017-2024 Harley-Davidson Milwaukee-Eight (M8) engines.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat displacement does this kit bring my M8 to?\u003c\/h3\u003e\n\u003cp\u003eThis kit displaces your 2017-2024 Milwaukee-Eight from 107cc to 128cc total.\u003c\/p\u003e\n\u003ch3\u003eIs professional installation required?\u003c\/h3\u003e\n\u003cp\u003eYes — big bore cylinder installation requires engine disassembly and precise machine work. Have a qualified Harley technician or performance shop handle this job.\u003c\/p\u003e\n\u003ch3\u003eWill I need to tune my bike after installation?\u003c\/h3\u003e\n\u003cp\u003eYes — a fuel and ignition tune via ECM flash or aftermarket tuner is strongly recommended to optimize the extra displacement and compression.\u003c\/p\u003e\n\u003ch3\u003eAre these cylinders street-legal?\u003c\/h3\u003e\n\u003cp\u003eThese are performance parts. Check your local emissions regulations before installation — some jurisdictions may require emissions testing.\u003c\/p\u003e\n\u003ch3\u003eWhat's included in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the big bore cylinders and Wiseco forged pistons. Head gaskets, base gaskets, and other sealing components are typically sold separately.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035940905071,"sku":"276-02060","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_eb6f5ba3-b041-48f0-9f77-27e76965e8bf.png?v=1779563853"},{"product_id":"rocket-performance-garage-llc-big-bore-cylinder-kits-kit-124-m8-2017-2024-e-276-02061","title":"Rocket Performance Garage Llc Big Bore Cylinder Kits - KIT 124\" M8 2017-2024 (e… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage 124 cubic-inch big-bore cylinder kit for 2017-2024 Harley Milwaukee-Eight engines, displacing the stock M8 to 124cc with premium USA-cast cylinders and CP forged pistons. Increases displacement and compression for measurable power gains without major engine teardown.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUSA-cast premium cylinders with textured black powdercoat\u003c\/li\u003e\n  \u003cli\u003eCP forged pistons included\u003c\/li\u003e\n  \u003cli\u003e4.375 in stroke\u003c\/li\u003e\n  \u003cli\u003e10.5:1 compression ratio\u003c\/li\u003e\n  \u003cli\u003eMachined fins for stock OEM appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 8-8101\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 124 cubic inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e 10.5:1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePiston Brand:\u003c\/strong\u003e CP (forged)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 20 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2017-2024 Harley-Davidson Milwaukee-Eight (M8) engine platforms.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this kit fit older Harley engines like the Twin Cam?\u003c\/h3\u003e\n\u003cp\u003eNo — this kit is engineered specifically for 2017-2024 Milwaukee-Eight engines. Twin Cam and earlier platform engines require different big-bore kits.\u003c\/p\u003e\n\u003ch3\u003eWhat compression ratio does this achieve?\u003c\/h3\u003e\n\u003cp\u003e10.5:1 compression, which is designed to work with 91-octane fuel and OEM Harley fuel management on stock M8 bikes.\u003c\/p\u003e\n\u003ch3\u003eAre the cylinders and pistons matched?\u003c\/h3\u003e\n\u003cp\u003eYes. The cylinders are precisely fitted and matched to the included CP forged pistons for proper clearance and performance.\u003c\/p\u003e\n\u003ch3\u003eDo I need a professional engine builder to install this?\u003c\/h3\u003e\n\u003cp\u003eBig-bore kits require cylinder head removal and careful machining. Professional installation is strongly recommended to ensure proper fitment and sealing.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035941298287,"sku":"276-02061","price":1599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_50102219-dd60-4113-8999-799ca084d054.png?v=1779563816"},{"product_id":"rocket-performance-garage-llc-big-bore-cylinder-kits-kit-110-twin-cam-2007-276-02062","title":"Rocket Performance Garage Llc Big Bore Cylinder Kits - KIT 110\" Twin CAM `2007-… — Harley-Davidson (2007-2016)","description":"\u003cp\u003eRocket Performance Garage 110-cubic-inch big bore cylinder kit for Twin Cam engines, bringing 2007–2016 stock 96\" and 103\" motors to 110\" displacement. Cylinders are cast domestically and paired with Wiseco CP forged pistons for reliable power gains.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases displacement from 96\" or 103\" to 110\"\u003c\/li\u003e\n  \u003cli\u003e4.375\" stroke with 10.5:1 compression ratio\u003c\/li\u003e\n  \u003cli\u003eCP forged pistons included\u003c\/li\u003e\n  \u003cli\u003ePower-coated textured black finish with machined fins\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 8-8002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplacement:\u003c\/strong\u003e 110 cubic inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStroke:\u003c\/strong\u003e 4.375\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e 10.5:1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 20 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Twin Cam engines from 2007 to 2016 with 96\" or 103\" displacement, upgrading them to 110\".\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my 2007-2016 Twin Cam engine?\u003c\/h3\u003e\n\u003cp\u003eYes — compatible with both stock 96\" and 103\" Twin Cam motors from 2007 through 2016.\u003c\/p\u003e\n\u003ch3\u003eWhat pistons are included?\u003c\/h3\u003e\n\u003cp\u003eCP forged Wiseco pistons matched and fitted to the cylinders.\u003c\/p\u003e\n\u003ch3\u003eDo I need to upgrade my fuel management?\u003c\/h3\u003e\n\u003cp\u003eWith the displacement increase and 10.5:1 compression, a fuel tuner or ECM adjustment is typically recommended for optimal power delivery.\u003c\/p\u003e\n\u003ch3\u003eAre these cylinders finished to OEM appearance?\u003c\/h3\u003e\n\u003cp\u003eThey feature a power-coated textured black finish with machined fins for a stock-like appearance.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53035941331055,"sku":"276-02062","price":1428.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_0d02cd50-0e96-42a0-91ff-bcd9e9bc15dd.png?v=1779582666"},{"product_id":"rocket-performance-garage-llc-oil-pump-and-cam-plate-twin-cam-and-cam-plate-20-276-02197","title":"Rocket Performance Garage Llc Oil Pump \u0026 Cam Plate Twin Cam - AND CAM Plate `20…","description":"\u003cp\u003eRocket Performance Garage oil pump and cam plate for Twin Cam engines, engineered to correct the factory scavenge inefficiency that plagued the Twin Cam since 1999. Forged aluminum construction with separate scavenge chambers for crankcase and cam chest delivers better oil circulation and is up to 25% stronger than stock castings.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eForged aluminum construction with precision CNC machining\u003c\/li\u003e\n  \u003cli\u003eDual independent scavenge sections — one for flywheel cavity, one for cam chest\u003c\/li\u003e\n  \u003cli\u003eGerotors designed to tolerate pinion shaft runout without damage\u003c\/li\u003e\n  \u003cli\u003eMagnetic traps on both scavenge rotors protect against metal debris\u003c\/li\u003e\n  \u003cli\u003eRemovable passage plugs for service access\u003c\/li\u003e\n  \u003cli\u003eReplaceable bronze pinion shaft and cam bushings\u003c\/li\u003e\n  \u003cli\u003eAdjustable oil pressure regulator without engine disassembly\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 7-7100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 16 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 11 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Twin Cam engines (1999 and newer).\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat problem does this solve on my Twin Cam?\u003c\/h3\u003e\n\u003cp\u003eFactory Twin Cams suffer from poor oil scavenge between crankcase and cam chest. This kit separates those circuits with independent pump chambers, improving circulation and engine longevity.\u003c\/p\u003e\n\u003ch3\u003eHow much stronger is this than the stock oil pump?\u003c\/h3\u003e\n\u003cp\u003eThe forged aluminum construction is up to 25% stronger than OEM cast parts, reducing the risk of pump failure under high-RPM or race conditions.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust oil pressure without removing the plate?\u003c\/h3\u003e\n\u003cp\u003eYes — the included adjustable oil pressure regulator can be tuned without unbolting the plate from the engine.\u003c\/p\u003e\n\u003ch3\u003eWhat if metal debris gets into the oil system?\u003c\/h3\u003e\n\u003cp\u003eBoth scavenge rotors include magnetic traps that capture ferrous debris before it circulates, protecting your engine.\u003c\/p\u003e\n\u003ch3\u003eAre the internal components serviceable?\u003c\/h3\u003e\n\u003cp\u003eYes — passage plugs are removable for cleaning, and the bronze pinion shaft and cam bushings can be replaced if worn.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036013060207,"sku":"276-02197","price":829.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/ba8d-6481e5a3671f8.png?v=1777531089"},{"product_id":"rocket-performance-garage-llc-speedy-push-rods-covers-twin-cam-rods-covers-276-02055","title":"Rocket Performance Garage Llc Speedy Push Rods\/Covers Twin Cam - Rods \/ Covers… — Harley-Davidson (1999-2026)","description":"\u003cp\u003eRocket Performance Garage speedy adjustable push rods and covers for 1999+ Harley-Davidson Twin Cam big twin engines. Installation is tool-free and does not require removal of the gas tank, rocker assemblies, or rocker box cover.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable to fit all tappet and cam base circle diameters\u003c\/li\u003e\n  \u003cli\u003eSimple installation without tank or rocker removal\u003c\/li\u003e\n  \u003cli\u003eIncludes black pushrod covers, O-rings, and cover keepers\u003c\/li\u003e\n  \u003cli\u003eEasy removal and reinstallation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 6-6004B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Twin Cam big twin engines, 1999 model year and later.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to remove my gas tank to install these?\u003c\/h3\u003e\n\u003cp\u003eNo — installation does not require removal of the gas tank, rocker assemblies, or rocker box cover.\u003c\/p\u003e\n\u003ch3\u003eWill these fit my Twin Cam engine?\u003c\/h3\u003e\n\u003cp\u003eYes, for all 1999 and later Twin Cam big twin engines. Adjustable design accommodates all tappet and cam base circle sizes.\u003c\/p\u003e\n\u003ch3\u003eWhat's included in the kit?\u003c\/h3\u003e\n\u003cp\u003eSpeedy adjustable push rods, black pushrod covers, O-rings, and black cover keepers — everything needed for installation.\u003c\/p\u003e\n\u003ch3\u003eAre these difficult to remove if I need to service them later?\u003c\/h3\u003e\n\u003cp\u003eNo — they install and remove easily without special tools, making future adjustments or service straightforward.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036013125743,"sku":"276-02055","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/6580-65145fa3c8b45.jpg?v=1777531089"},{"product_id":"rocket-performance-garage-llc-speedy-push-rods-covers-m8-rods-covers-black-276-02056","title":"Rocket Performance Garage Llc Speedy Push Rods\/Covers M8 - Rods \/ Covers Black…","description":"\u003cp\u003eRocket Performance Garage Speedy push rods and covers for Milwaukee-Eight big twins, engineered to simplify cam changes without removing rocker boxes or coolant lines. Cut the stock rods, install your new cam, and save hours on labor — built from chromoly steel for strength and adjustable to work with all M8 cams and tappets.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChromoly steel construction reduces pushrod flex\u003c\/li\u003e\n  \u003cli\u003eCut stock pushrods — no rocker box or coolant line removal needed\u003c\/li\u003e\n  \u003cli\u003eFully adjustable, compatible with all M8 cams and tappets\u003c\/li\u003e\n  \u003cli\u003eIncludes black pushrod covers, O-rings, and cover keepers\u003c\/li\u003e\n  \u003cli\u003eSpeeds up cam change jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 6-6005B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson and Indian Motorcycle V-twin engines with Milwaukee-Eight (M8) platform.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to remove my rocker boxes to install these?\u003c\/h3\u003e\n\u003cp\u003eNo. The Speedy design lets you cut your stock pushrods and install new cams without disassembling rocker boxes or coolant lines.\u003c\/p\u003e\n\u003ch3\u003eWill these work with my aftermarket cam?\u003c\/h3\u003e\n\u003cp\u003eYes — these rods are fully adjustable and compatible with all M8 cams and tappet combinations.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the kit?\u003c\/h3\u003e\n\u003cp\u003ePushrods, black pushrod covers, O-rings, and black cover keepers — everything needed for installation.\u003c\/p\u003e\n\u003ch3\u003eWhy chromoly steel?\u003c\/h3\u003e\n\u003cp\u003eChromoly reduces flex under load, keeping your valvetrain more stable than stock rods during high-rpm operation.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036013092975,"sku":"276-02056","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_7c3d2be1-5c45-452e-9131-a08c822f6f7f.png?v=1779564362"},{"product_id":"rocket-performance-garage-llc-oil-pump-and-cam-plate-m8-and-cam-plate-m8-2017-2-276-02198","title":"Rocket Performance Garage Llc Oil Pump \u0026 Cam Plate M8 - AND CAM Plate M8 2017-2…","description":"\u003cp\u003eRocket Performance Garage forged aluminum oil pump and cam plate for Harley Milwaukee-Eight engines, designed to eliminate oil sumping by separating the crankcase and cam chest scavenge chambers with individual pump gears. CNC machined from forged aluminum with magnetic debris traps and adjustable oil pressure regulation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision CNC machined forged aluminum construction\u003c\/li\u003e\n  \u003cli\u003eDual scavenge sections for flywheel cavity and cam chest\u003c\/li\u003e\n  \u003cli\u003eGerotors engineered to tolerate pinion shaft runout\u003c\/li\u003e\n  \u003cli\u003eMagnetic traps protect gears from metal debris\u003c\/li\u003e\n  \u003cli\u003eRemovable passage plugs for service access\u003c\/li\u003e\n  \u003cli\u003eAdjustable oil pressure regulator\u003c\/li\u003e\n  \u003cli\u003eBronze pinion shaft and cam bushings replaceable\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 7-7101\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 16 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 11 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Milwaukee-Eight (M8) engines, 2017 and newer.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this solve the Milwaukee-Eight oil sumping problem?\u003c\/h3\u003e\n\u003cp\u003eYes — separate scavenge chambers for the crankcase and cam chest prevent oil from pooling and sump-related pressure loss.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the oil pressure without removing the plate from the engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the regulator is adjustable in place, no engine removal required.\u003c\/p\u003e\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe forged aluminum oil pump and cam plate assembly with all hardware, passage plugs, and magnetic traps installed.\u003c\/p\u003e\n\u003ch3\u003eAre the bushings and pinion shaft replaceable?\u003c\/h3\u003e\n\u003cp\u003eYes — bronze pinion shaft and cam bushings can be replaced if worn without replacing the entire pump assembly.\u003c\/p\u003e\n\u003ch3\u003eIs this made in the USA?\u003c\/h3\u003e\n\u003cp\u003eYes — manufactured in the USA.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036013191279,"sku":"276-02198","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/4c51-6481e5bcd52cf.png?v=1777531090"},{"product_id":"rocket-performance-garage-llc-oil-pump-and-cam-plate-m8-and-cam-plate-m8-2017-2-276-02199","title":"Rocket Performance Garage Llc Oil Pump \u0026 Cam Plate M8 - AND CAM Plate M8 2017-2…","description":"\u003cp\u003eRocket Performance Garage forged aluminum oil pump and cam plate for Harley Milwaukee-Eight engines, designed to eliminate oil sumping by separating the crankcase and cam chest scavenge chambers. Precision CNC machined with dual independent pump gears and magnetic debris protection to restore proper oil pressure and flow throughout the engine.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eForged aluminum construction with CNC machining for increased strength\u003c\/li\u003e\n  \u003cli\u003eDual independent scavenge sections for flywheel cavity and cam chest\u003c\/li\u003e\n  \u003cli\u003eGerotors designed to tolerate pinion shaft runout without damage\u003c\/li\u003e\n  \u003cli\u003eMagnetic traps on both scavenge rotors protect from metal debris\u003c\/li\u003e\n  \u003cli\u003eRemovable passage plugs for service access\u003c\/li\u003e\n  \u003cli\u003eReplaceable bronze pinion shaft and cam bushings\u003c\/li\u003e\n  \u003cli\u003eAdjustable oil pressure regulator — tune without removing from engine\u003c\/li\u003e\n  \u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage LLC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 7-7102\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Forged aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 16 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 11 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Milwaukee-Eight (M8) engines, 2017 and newer.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this fix the Milwaukee-Eight oil sumping problem?\u003c\/h3\u003e\n\u003cp\u003eYes — the dual independent scavenge chambers eliminate the pressure imbalance that causes oil sumping in stock M8 engines.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the oil pressure myself?\u003c\/h3\u003e\n\u003cp\u003eYes. The adjustable regulator lets you tune oil pressure without removing the plate from the engine.\u003c\/p\u003e\n\u003ch3\u003eAre internal parts replaceable if worn?\u003c\/h3\u003e\n\u003cp\u003eYes — bronze pinion shaft and cam bushings can be replaced, and passage plugs are removable for service.\u003c\/p\u003e\n\u003ch3\u003eWhat about metal debris from wear?\u003c\/h3\u003e\n\u003cp\u003eBoth scavenge rotors have magnetic traps to capture metal particles before they circulate through the engine.\u003c\/p\u003e\n\u003ch3\u003eIs this made in the U.S.A.?\u003c\/h3\u003e\n\u003cp\u003eYes — manufactured and machined in the U.S.A.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036013224047,"sku":"276-02199","price":839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/4c51-6481e5bcd52cf_66fe6efc-d2dc-4ca7-a21e-395a9c33c2ea.png?v=1777531090"},{"product_id":"rocket-performance-garage-llc-roller-rocker-arms-m8-2017-2024-276-02210","title":"Rocket Performance Garage Llc Roller Rocker Arms - M8 `2017-2024 — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage forged roller rocker arms for Harley Milwaukee-Eight engines, engineered to handle high-lift cams and aggressive valve spring pressures without sacrificing longevity. Built from 8620 steel with a 1.640 ratio geometry optimized for cams exceeding .550\" lift and rated to .650\" maximum valve lift.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e8620 forged steel construction for strength\u003c\/li\u003e\n  \u003cli\u003eRoller design eliminates thrust wear on valves\u003c\/li\u003e\n  \u003cli\u003e1.640 rocker ratio optimized for high-lift cams\u003c\/li\u003e\n  \u003cli\u003e50% longer bushings than stock for extended rebuild intervals\u003c\/li\u003e\n  \u003cli\u003eDirect oil spray to valve springs reduces thermal failure risk\u003c\/li\u003e\n  \u003cli\u003eLarger thrust surface area reduces head wear\u003c\/li\u003e\n  \u003cli\u003eCapable of .650\" maximum valve lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 7-7201\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 4 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits Harley-Davidson Milwaukee-Eight (M8) models 2017–2024. Recommended for engines running cams with .550\" lift or greater.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need these rockers if I'm running a stock cam?\u003c\/h3\u003e\n\u003cp\u003eNo. Stock rockers are adequate for factory cams. These are engineered for high-lift performance cams (.550\" lift and above).\u003c\/p\u003e\n\u003ch3\u003eWhat's the maximum valve lift these can handle?\u003c\/h3\u003e\n\u003cp\u003eRocket rockers are rated to .650\" maximum valve lift, making them compatible with aggressive aftermarket cam profiles.\u003c\/p\u003e\n\u003ch3\u003eHow do longer bushings affect performance?\u003c\/h3\u003e\n\u003cp\u003eLonger bushings (50% longer than stock) increase the time between rebuilds and reduce rocker wear under high-lift stress.\u003c\/p\u003e\n\u003ch3\u003eWill these work on my 2015 or older M8?\u003c\/h3\u003e\n\u003cp\u003eThis part is designed for 2017–2024 M8 engines. Verify fitment with the manufacturer if you have an older model.\u003c\/p\u003e\n\u003ch3\u003eDo I need to re-tune after installing these rockers?\u003c\/h3\u003e\n\u003cp\u003eRockers alone do not require remapping. Your tuning strategy depends on your complete cam and head package.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036013256815,"sku":"276-02210","price":624.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/4d49-65145fb68d3aa.jpg?v=1777531090"},{"product_id":"rocket-performance-garage-llc-m8-performance-intake-manifold-2017-2024-exc-v-276-02078","title":"Rocket Performance Garage Llc M8 Performance Intake Manifold - 2017-2024 (exc.v… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage M8 performance intake manifold for 2017-2024 Harley-Davidson Milwaukee-Eight engines. Cast aluminum with hand-ported high-flow design to eliminate OEM plastic manifold restrictions and increase airflow into the cylinder head, especially effective on 114 cubic inch and larger motors.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 heat-treated cast aluminum construction\u003c\/li\u003e\n  \u003cli\u003eHand-ported high-flow design\u003c\/li\u003e\n  \u003cli\u003eCNC machined surfaces\u003c\/li\u003e\n  \u003cli\u003eOutperforms competitor alternatives\u003c\/li\u003e\n  \u003cli\u003eNew rubber O-ring seal included\u003c\/li\u003e\n  \u003cli\u003eOptimized for Rocket Cams and big-bore kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage Llc\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 9-9000HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6 heat-treated cast aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2017-2024 Harley-Davidson Milwaukee-Eight (M8) engines. Particularly effective on 114 cubic inch and larger displacement motors.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this work on a stock M8 engine?\u003c\/h3\u003e\n\u003cp\u003eYes, but the performance gain is most noticeable when paired with a Rocket Cam or big-bore kit on 114 cubic inch and larger motors.\u003c\/p\u003e\n\u003ch3\u003eHow much horsepower will I gain?\u003c\/h3\u003e\n\u003cp\u003eHorsepower gains depend on your complete setup. The hand-ported design eliminates OEM manifold airflow restrictions and pairs well with Rocket performance upgrades.\u003c\/p\u003e\n\u003ch3\u003eDoes this require any modifications to install?\u003c\/h3\u003e\n\u003cp\u003eDirect replacement for the OEM M8 plastic intake manifold. New rubber O-ring included.\u003c\/p\u003e\n\u003ch3\u003eWhy is the OEM plastic manifold a problem?\u003c\/h3\u003e\n\u003cp\u003eThe OEM design restricts airflow into the cylinder head port opening, which limits performance especially on larger-displacement motors.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036034654319,"sku":"276-02078","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/820d-652d74000b308.jpg?v=1777531237"},{"product_id":"rocket-performance-garage-llc-m8-performance-intake-manifold-2017-2024-exc-v-276-02079","title":"Rocket Performance Garage Llc M8 Performance Intake Manifold - 2017-2024 (exc.v… — Harley-Davidson (2017-2024)","description":"\u003cp\u003eRocket Performance Garage M8 performance intake manifold in T6 heat-treated cast aluminum with CNC-machined surfaces, designed to replace the restrictive OEM plastic M8 intake and unlock airflow gains on Milwaukee-Eight engines. Hand-ported high-flow design delivers measurable horsepower increases, especially on 114 cubic inch and larger displacement motors.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 heat-treated cast aluminum construction\u003c\/li\u003e\n  \u003cli\u003eCNC-machined surfaces for precise port matching\u003c\/li\u003e\n  \u003cli\u003eHand-ported high-flow design\u003c\/li\u003e\n  \u003cli\u003eNew rubber O-ring included\u003c\/li\u003e\n  \u003cli\u003eOutperforms competitor intake manifolds\u003c\/li\u003e\n  \u003cli\u003eDirect OEM replacement fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rocket Performance Garage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 9-9000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T6 Heat-Treated Cast Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2017-2024 Harley-Davidson Milwaukee-Eight (M8) models, except as noted in model restrictions.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill this work on stock M8 engines or only big-bore kits?\u003c\/h3\u003e\n\u003cp\u003eWorks on stock M8 and larger displacement motors. Performance gains are most dramatic on 114 cubic inch and larger engines when paired with a Rocket Cam.\u003c\/p\u003e\n\u003ch3\u003eDo I need to tune or rejet after installing this manifold?\u003c\/h3\u003e\n\u003cp\u003eIntake manifold replacement alone typically does not require remapping. Tuning will maximize gains when combined with cams or big-bore work.\u003c\/p\u003e\n\u003ch3\u003eHow much horsepower can I expect to gain?\u003c\/h3\u003e\n\u003cp\u003eGains vary based on engine displacement and other modifications. The OEM plastic manifold significantly restricts airflow, especially on larger motors — this aluminum replacement unlocks that potential.\u003c\/p\u003e\n\u003ch3\u003eWhat's included in the box?\u003c\/h3\u003e\n\u003cp\u003eThe cast aluminum intake manifold, CNC-machined and hand-ported, plus a new rubber O-ring for the OEM gasket seal.\u003c\/p\u003e\n\u003ch3\u003eIs this a direct bolt-on replacement for the OEM plastic manifold?\u003c\/h3\u003e\n\u003cp\u003eYes — direct fit using existing mounting points and hardware. No modifications needed.\u003c\/p\u003e","brand":"Rocket Performance Garage Llc","offers":[{"title":"Default Title","offer_id":53036034687087,"sku":"276-02079","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/00d2-657b3cf88e928.jpg?v=1777531238"}],"url":"https:\/\/vtwinbikers.com\/collections\/rocket-performance-garage-llc.oembed","provider":"Vtwinbikers","version":"1.0","type":"link"}