{"title":"Softail Suspension","description":"\u003cp\u003eSoftail suspension spans four decades, and this page mixes them all. Early frames get Burly Softail Slammer lowering kits for 1989-1999 bikes, a Springer fork lowering kit and Wild 1 and Harddrive adjustable lowering kits. Newer bikes get FOX IFP-QSR shocks, Harddrive HLR remote reservoir shocks and Arnott air shocks written for the Milwaukee-Eight.\u003c\/p\u003e\n\u003ch2\u003eForks and tubes\u003c\/h2\u003e\n\u003cp\u003eFork parts are the largest group, led by Harddrive hard chrome tubes in lengths from 20.5 to 32.5 inches, plus Colony Machine stem caps, bolts and bearing kits. For damping, Harddrive offers Scepter 25 kits for 49mm forks, FOX has a Street Performance cartridge kit, and Racing Brothers lists Bishop 43mm inverted forks for the FXLRS and FXLRST.\u003c\/p\u003e\n\u003cp\u003eThe key for any Softail order is the frame generation. All Balls offers swingarm bearing kits for 1984-1999 and 2000-2024, and Burly lists Adjust-A-Ride kits for Softail and Touring bikes made before 2000. A part for one era is usually wrong for another, and tags from 1984 to 2026 tell you how wide this net is.\u003c\/p\u003e\n\u003cp\u003ePrices begin at about $11 for a Colony Machine stem cap and under $20 for All Balls fork seals, then run through Burly shocks and lowering kits and FOX shocks near $800 to $1,100. Arnott air suspension tops the range at about $1,740, and the Racing Brothers inverted forks sit higher still.\u003c\/p\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/en-co\/collections\/softail-parts\"\u003eSoftail parts\u003c\/a\u003e, \u003ca href=\"\/en-co\/collections\/softail-brakes\"\u003eSoftail brakes\u003c\/a\u003e, \u003ca href=\"\/en-co\/collections\/suspension\"\u003eall suspension\u003c\/a\u003e or \u003ca href=\"\/en-co\/collections\/race-tech\"\u003eRace Tech\u003c\/a\u003e to narrow it down.\u003c\/p\u003e","products":[{"product_id":"k-and-s-fork-seals-41x54x11-116-1041","title":"K\u0026S Fork Seals - 41x54x11mm - Harley Softail \u0026 Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eK\u0026amp;S 41x54x11mm Fork Seals are replacement seals for the front forks, sold as a matched pair so both fork tubes can be serviced together. Manufactured to OEM specifications, they are designed as a direct replacement for worn seals.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe seals keep fork oil contained and dirt out of the suspension, which helps stop oil leaks down the fork legs. Restoring the seals helps maintain consistent damping and a predictable front end feel, and the matched pair ensures both sides are refreshed at the same time.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eWorn fork seals can lead to a mushy front end, inconsistent damping, and oil residue on the fork tubes. If you are noticing any of these signs, replacing the seals with K\u0026amp;S Fork Seals is a straightforward way to restore controlled ride quality and protect the fork internals.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e K\u0026amp;S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 16-1041\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 41x54x11mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Matched pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included with this product?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eA matched pair of K\u0026amp;S 41x54x11mm fork seals is included, so both fork tubes can be serviced together.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat are these seals designed to do?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are designed to stop fork oil leaks, keep dirt out of the suspension, and help maintain consistent damping and front end feel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre these seals made to OEM specifications?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, they are manufactured to OEM specifications and engineered to meet factory tolerances for reliable sealing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included with this product?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A matched pair of K\u0026S 41x54x11mm fork seals is included, so both fork tubes can be serviced together.\"}}, {\"@type\": \"Question\", \"name\": \"What are these seals designed to do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are designed to stop fork oil leaks, keep dirt out of the suspension, and help maintain consistent damping and front end feel.\"}}, {\"@type\": \"Question\", \"name\": \"Are these seals made to OEM specifications?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, they are manufactured to OEM specifications and engineered to meet factory tolerances for reliable sealing.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"K\u0026S","offers":[{"title":"Default Title","offer_id":53034982572143,"sku":"116-1041","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_f5abb9bf-c0cf-4f5e-aece-7df25d01d56e.png?v=1779557997"},{"product_id":"race-tech-high-performance-fork-springs-spring-0-90kg-harley-200-2341090","title":"Race Tech High Performance Fork Springs 0.90kg - Harley Touring, Softail, Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRace Tech high-performance fork springs are designed to upgrade the front suspension with a 0.90kg spring rate. They are built to correct under-sprung front ends, a common condition that can lead to excessive brake dive and a vague feeling through corners.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRestoring chassis balance is the main purpose of this upgrade. With firmer, controlled suspension response, the front end gives riders a more predictable and confidence-inspiring ride, and it helps the bike absorb bumps, maintain traction and hold a line. The springs are a practical choice for heavier riders, aggressive riding styles, or riders who often carry passengers or luggage.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe springs are made from chrome silicon wire, which resists sacking out, and they are shot-peened and heat-treated to maintain precise spring rates over time. Race Tech fork springs are a critical upgrade for riders looking to get more from their V-twin's front-end performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor off-road \/ closed-course race use only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FRSP S2341090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 0.90kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome silicon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.64 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat spring rate do these fork springs use?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese Race Tech fork springs have a 0.90kg spring rate designed to correct under-sprung front ends and improve control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material are the springs made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe springs are constructed from chrome silicon wire, which resists sacking out, and they are shot-peened and heat-treated for durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does this upgrade improve?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt restores chassis balance and predictability, helping reduce excessive brake dive and giving a more confident, controlled front end.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What spring rate do these fork springs use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These Race Tech fork springs have a 0.90kg spring rate designed to correct under-sprung front ends and improve control.\"}}, {\"@type\": \"Question\", \"name\": \"What material are the springs made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The springs are constructed from chrome silicon wire, which resists sacking out, and they are shot-peened and heat-treated for durability.\"}}, {\"@type\": \"Question\", \"name\": \"What does this upgrade improve?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It restores chassis balance and predictability, helping reduce excessive brake dive and giving a more confident, controlled front end.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035012685935,"sku":"200-2341090","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_df39b27e-d854-471e-a723-7ca67a83824d.png?v=1779559139"},{"product_id":"race-tech-high-performance-fork-springs-spring-0-80kg-200-3234080","title":"Race Tech High Performance Fork Springs 0.80kg - Harley Touring \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRace Tech High Performance Fork Springs are 0.80kg rate front fork springs built to correct factory under-springing. Many factory forks run springs that are too soft for aggressive riding or heavier loads, and these springs address that by giving the front end a firmer, more controlled rate.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eWith a firmer rate, the front end can absorb bumps more effectively, reduce brake dive, and hold its composure through turns. Riders typically notice better front-end stability, more predictable handling, and greater confidence when pushing the bike, whether on canyon roads or on the open road.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eEach spring is made from chrome silicon wire and shot-peened and heat-treated to resist sacking-out, helping maintain accurate spring rates over time. The springs are part of Race Tech's High Performance line, aimed at performance-oriented riders looking for a meaningful front-end upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor off-road \/ closed-course race use only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FRSP S3234080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 0.80kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome silicon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreatment:\u003c\/strong\u003e Shot-peened and heat-treated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.0057 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat are these springs made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are constructed from high-grade chrome silicon wire that is shot-peened and heat-treated for durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat spring rate is this set?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThis Race Tech High Performance set is rated at 0.80kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat problem do these springs address?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey correct the under-springing common in factory suspension, giving a firmer, more stable front end with less brake dive.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What are these springs made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are constructed from high-grade chrome silicon wire that is shot-peened and heat-treated for durability.\"}}, {\"@type\": \"Question\", \"name\": \"What spring rate is this set?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This Race Tech High Performance set is rated at 0.80kg.\"}}, {\"@type\": \"Question\", \"name\": \"What problem do these springs address?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They correct the under-springing common in factory suspension, giving a firmer, more stable front end with less brake dive.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035012948079,"sku":"200-3234080","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_f987edfc-10a8-4fcb-b2b4-78a39903c865.png?v=1779559142"},{"product_id":"race-tech-high-performance-fork-springs-spring-0-85kg-200-3234085","title":"Race Tech High Performance Fork Springs 0.85kg - Harley Touring \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRace Tech High Performance Fork Springs are 0.85kg front fork springs designed to correct a factory under-sprung condition, giving the front end a firmer and more controlled rate. They are made from chrome silicon wire for durability and are shot-peened and heat-treated to resist sacking-out, so the spring rate stays consistent over time.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose these springs to improve front-end feel. The firmer rate helps reduce excessive brake dive, improves braking stability and adds to cornering confidence. Properly sprung forks help keep the tire planted and provide better feedback, which can make the bike feel more predictable on aggressive roads or on longer rides.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThese springs are a solid choice for riders who want a more balanced front suspension and a more engaging, controlled ride from their V-twin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor off-road \/ closed-course race use only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FRSP S3234085\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 0.85kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome silicon wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.155 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material are the springs made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are manufactured from chrome silicon wire, which provides durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat problem do these springs address?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey correct the factory under-sprung condition and resist sacking-out, helping maintain a consistent spring rate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is the spring rate?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe rate is 0.85kg, offering a firmer and more controlled front-end response compared to stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What material are the springs made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are manufactured from chrome silicon wire, which provides durability.\"}}, {\"@type\": \"Question\", \"name\": \"What problem do these springs address?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They correct the factory under-sprung condition and resist sacking-out, helping maintain a consistent spring rate.\"}}, {\"@type\": \"Question\", \"name\": \"What is the spring rate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The rate is 0.85kg, offering a firmer and more controlled front-end response compared to stock.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035013013615,"sku":"200-3234085","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_d1487279-9d97-452e-ade1-f09bd0e043bf.png?v=1779559142"},{"product_id":"race-tech-high-performance-fork-springs-spring-0-90kg-200-3234090","title":"Race Tech High Performance Fork Springs 0.90kg - Harley Touring \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRace Tech High Performance Fork Springs in 0.90kg rating are built to firm up the front end of your V-twin. They are designed to correct the under-sprung condition often found in factory front suspension, giving the fork more support and a more controlled feel through the front wheel.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose these springs for a firmer, more composed front end when riding hard, carrying extra weight, or running a heavier setup. The springs are made from chrome silicon wire, shot-peened and heat-treated for durability, and are rated to resist sacking-out so the spring rate stays consistent over time. They are designed to improve braking stability and cornering feel.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRace Tech lists these fork springs as a foundational upgrade for performance-oriented front suspension. The product weighs 2.31 lbs and is identified by part number FRSP S3234090.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor off-road \/ closed-course race use only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FRSP S3234090\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 0.90kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome silicon wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.31 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material are these fork springs made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are constructed from premium chrome silicon wire that is shot-peened and heat-treated for durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat spring rate is this Race Tech fork spring set?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThis set is rated at 0.90kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat problem do these springs address?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are designed to correct the under-sprung condition often found in factory front ends, and they resist sacking-out to keep a consistent rate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What material are these fork springs made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are constructed from premium chrome silicon wire that is shot-peened and heat-treated for durability.\"}}, {\"@type\": \"Question\", \"name\": \"What spring rate is this Race Tech fork spring set?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This set is rated at 0.90kg.\"}}, {\"@type\": \"Question\", \"name\": \"What problem do these springs address?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are designed to correct the under-sprung condition often found in factory front ends, and they resist sacking-out to keep a consistent rate.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035013046383,"sku":"200-3234090","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_475cf527-5eac-4f4a-bd07-bf9db6824e25.png?v=1779559143"},{"product_id":"race-tech-high-performance-fork-springs-spring-1-00kg-200-3234100","title":"Race Tech High Performance Fork Springs 1.00kg - Harley Touring \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRace Tech High Performance Fork Springs in a 1.00kg rate are built for riders who want firmer, more controlled front-end performance than factory fork springs provide. They are designed to correct severe under-sprung conditions, which is the situation where stock springs struggle to support the load placed on the front end during demanding riding.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe springs are made from chrome silicon wire, which the product is built around for durability. They are designed to resist sacking-out, so the spring rate stays consistent over time rather than softening. Riders can expect improved braking stability, better cornering grip, and more composed handling when riding aggressively, carrying heavy loads, or pushing the bike hard. The 1.00kg rate gives a higher-rate, performance-oriented feel for heavier riders or anyone seeking a firmer ride from their V-twin.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Race Tech High Performance Fork Springs are a practical upgrade for riders who want their front suspension to keep pace with the way they ride. Part number FRSP S3234100, weight 2.35 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor off-road \/ closed-course race use only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 1.00kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chrome silicon wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FRSP S3234100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.35 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat spring rate do these fork springs use?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese Race Tech High Performance Fork Springs have a 1.00kg rate, a higher rate designed for firmer front-end support.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material are the springs made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe springs are made from chrome silicon wire, which is built for durability and resists sacking-out to keep the rate consistent.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat problem do these springs address?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey correct severe under-sprung conditions, providing the support needed when factory fork springs are overwhelmed by aggressive riding or heavy loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What spring rate do these fork springs use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These Race Tech High Performance Fork Springs have a 1.00kg rate, a higher rate designed for firmer front-end support.\"}}, {\"@type\": \"Question\", \"name\": \"What material are the springs made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The springs are made from chrome silicon wire, which is built for durability and resists sacking-out to keep the rate consistent.\"}}, {\"@type\": \"Question\", \"name\": \"What problem do these springs address?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They correct severe under-sprung conditions, providing the support needed when factory fork springs are overwhelmed by aggressive riding or heavy loads.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035013144687,"sku":"200-3234100","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_63e80464-b712-4baa-bfc5-020fcc05909e.png?v=1779559155"},{"product_id":"race-tech-fork-spring-kit-suspension-kit-1-0kg-harley-200-3810","title":"Race Tech Gold Valve 1.0kg Fork Spring Kit - Harley Touring \u0026 Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRace Tech's Gold Valve 1.0kg Fork Spring Kit is a front suspension upgrade for Harley-Davidson and V-twin riders who want a more controlled and comfortable front end. The kit pairs Gold Valve Cartridge Emulators, which provide advanced damping, with 1.0 kg high-performance fork springs, working together to deliver a more stable and predictable ride whether you are cruising or riding harder.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit to improve how the front end responds to the road, with the springs and cartridge emulators helping to control the suspension and improve handling and ride quality. The kit is also customizable to rider weight and preference, so the front suspension can be tailored to your needs even at stock height.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit includes lowering hardware for an optional 1 to 2 inch drop, which lets you set a custom stance while keeping the improved suspension function. The Gold Valve Cartridge Emulators and performance springs are the core of the package, offering a noticeable improvement in comfort and control on longer rides.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FLEK S3810\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.94 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rating:\u003c\/strong\u003e 1.0 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Gold Valve Cartridge Emulators, fork springs, lowering hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop Option:\u003c\/strong\u003e Optional 1-2 inch drop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included in the kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes Gold Valve Cartridge Emulators, 1.0 kg high-performance fork springs, and optional lowering hardware for a 1 to 2 inch drop.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan the suspension be adjusted for rider weight?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the kit is customizable for rider weight and preference, letting you tailor the front suspension to your needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan I lower the front end with this kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the included lowering hardware provides an optional 1 to 2 inch front-end drop while keeping the improved suspension function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes Gold Valve Cartridge Emulators, 1.0 kg high-performance fork springs, and optional lowering hardware for a 1 to 2 inch drop.\"}}, {\"@type\": \"Question\", \"name\": \"Can the suspension be adjusted for rider weight?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the kit is customizable for rider weight and preference, letting you tailor the front suspension to your needs.\"}}, {\"@type\": \"Question\", \"name\": \"Can I lower the front end with this kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the included lowering hardware provides an optional 1 to 2 inch front-end drop while keeping the improved suspension function.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035013374063,"sku":"200-3810","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_1d376499-e5e3-44ee-905b-8abcc390b4b6.png?v=1779559149"},{"product_id":"race-tech-fork-spring-kit-suspension-kit-0-85kg-harley-200-3885","title":"Race Tech Gold Valve Cartridge Emulator Fork Spring Kit 0.85kg - Harley Touring \u0026 Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Race Tech Gold Valve Cartridge Emulator Fork Spring Kit converts the damper rod forks on your Harley-Davidson into a cartridge-style setup. The kit pairs Gold Valve Cartridge Emulators with high-performance springs, rated at 0.85kg, to give the front end more controlled damping and a smoother ride over varied road surfaces.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit to tune their suspension rather than accept the stock setup. Customizable tuning allows the front end to be matched to rider weight and preference, whether the goal is a more comfortable ride for long hauls or more responsive handling in the corners. The kit is also designed to reduce fork dive under braking, helping the front end stay composed when slowing down.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eOptional lowering hardware is included for those who want a custom stance, providing a 1-2 inch front-end drop. The lowering hardware is entirely optional and is not required to achieve the performance gains the kit offers. The kit weighs 2.75 lbs.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FLEK S3885\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 0.85kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.75 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Drop Option:\u003c\/strong\u003e 1-2 inches with optional lowering hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Gold Valve Cartridge Emulators, hi-performance fork springs, optional lowering hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included in the kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes Gold Valve Cartridge Emulators and high-performance fork springs, along with optional lowering hardware for a 1-2 inch front-end drop.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs the lowering hardware required?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eNo. The lowering hardware is optional and is not required to achieve the performance gains the kit provides.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the kit do for the front end?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt converts the damper rod forks to cartridge-style performance, offering customizable tuning for rider weight, improved ride comfort, and reduced fork dive under braking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes Gold Valve Cartridge Emulators and high-performance fork springs, along with optional lowering hardware for a 1-2 inch front-end drop.\"}}, {\"@type\": \"Question\", \"name\": \"Is the lowering hardware required?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The lowering hardware is optional and is not required to achieve the performance gains the kit provides.\"}}, {\"@type\": \"Question\", \"name\": \"What does the kit do for the front end?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It converts the damper rod forks to cartridge-style performance, offering customizable tuning for rider weight, improved ride comfort, and reduced fork dive under braking.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035013537903,"sku":"200-3885","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_3bf7c063-fd2c-4493-8831-5ae7f91e316f.png?v=1779559152"},{"product_id":"race-tech-fork-spring-kit-suspension-kit-0-90kg-harley-200-3890","title":"Race Tech Gold Valve Cartridge Emulator Fork Spring Kit 0.90kg - Harley Touring \u0026 Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Race Tech Gold Valve Cartridge Emulator Fork Spring Kit replaces damper rod technology in the front fork with Gold Valve Cartridge Emulators, giving riders a cartridge-style damping system. It is paired with high-performance 0.90kg fork springs, and the kit is designed for Harley-Davidson and V-twin riders who want more control over their front suspension.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit for a front end that feels more controlled and predictable. The Gold Valve Cartridge Emulators provide precise damping, while the 0.90kg springs add a responsive feel that can reduce fork dive and help the front end stay composed over varied road surfaces. The kit also allows suspension tuning to be personalized to the rider's weight and preference.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit includes optional lowering hardware that lets you drop the front end by 1 to 2 inches. This gives you the option to adjust ride height for a more aggressive stance or a different riding position while keeping the handling improvements from the cartridge emulators and springs. The kit weighs 2.89 lbs.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FLEK S3890\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 0.90kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Gold Valve Cartridge Emulators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.89 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Hardware:\u003c\/strong\u003e Lowering hardware (1-2 inch front drop)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does this kit convert the front fork to?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt converts damper rod forks to a high-performance cartridge system using Gold Valve Cartridge Emulators.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat spring rate do the fork springs use?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes high-performance fork springs rated at 0.90kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs lowering hardware included?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eOptional lowering hardware is included, allowing a 1-2 inch drop at the front end for a custom ride height.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does this kit convert the front fork to?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It converts damper rod forks to a high-performance cartridge system using Gold Valve Cartridge Emulators.\"}}, {\"@type\": \"Question\", \"name\": \"What spring rate do the fork springs use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes high-performance fork springs rated at 0.90kg.\"}}, {\"@type\": \"Question\", \"name\": \"Is lowering hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Optional lowering hardware is included, allowing a 1-2 inch drop at the front end for a custom ride height.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035013603439,"sku":"200-3890","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_efd24044-5e3b-4ee5-9b2a-49a097590096.png?v=1779559154"},{"product_id":"race-tech-fork-spring-kit-suspension-kit-0-95kg-harley-200-3895","title":"Race Tech Gold Valve Cartridge Emulator Fork Spring Kit 0.95kg - Harley Touring \u0026 Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Race Tech Gold Valve Cartridge Emulator Fork Spring Kit is a complete front suspension package that converts damper rod forks to a high-performance cartridge system. The kit pairs Gold Valve Cartridge Emulators, which provide advanced damping, with 0.95kg fork springs for solid support at the front end.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit for the control it gives over stock suspension. The Gold Valve Cartridge Emulators allow precise, tunable damping, and the suspension can be set up to suit rider weight and riding style. The springs and damping work together to reduce brake dive and enhance cornering stability, giving a firm yet compliant ride across a range of riding conditions.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit also includes optional lowering hardware for a 1-2 inch front drop. Whether you keep the stock height for ergonomics or lower the front end for a more aggressive stance, the setup is designed to respond with confidence and control on every ride.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FLEK S3895\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e 0.95kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.0785 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Drop:\u003c\/strong\u003e 1-2 inch (optional lowering hardware)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included in this kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes Gold Valve Cartridge Emulators and 0.95kg fork springs, along with optional lowering hardware for a 1-2 inch front drop.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the kit do to the front forks?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt converts damper rod forks to a high-performance cartridge system with tunable damping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan the suspension be adjusted?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the suspension can be tuned to rider weight and riding style, and the optional lowering hardware lets you choose your front ride height.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included in this kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes Gold Valve Cartridge Emulators and 0.95kg fork springs, along with optional lowering hardware for a 1-2 inch front drop.\"}}, {\"@type\": \"Question\", \"name\": \"What does the kit do to the front forks?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It converts damper rod forks to a high-performance cartridge system with tunable damping.\"}}, {\"@type\": \"Question\", \"name\": \"Can the suspension be adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the suspension can be tuned to rider weight and riding style, and the optional lowering hardware lets you choose your front ride height.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035013636207,"sku":"200-3895","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_7bc2ecca-6e8c-4b2d-9d7b-36242cdf0eb8.png?v=1779559158"},{"product_id":"race-tech-gold-valve-cartridge-emulator-200-s3802","title":"Race Tech Gold Valve Cartridge Emulator - Harley Touring, Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Race Tech Gold Valve Cartridge Emulator is a damping upgrade for forks that currently use a damping rod design. It converts that setup to cartridge-style performance by replacing the fixed orifice with an adjustable damping valve, giving you a more controllable front end.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this upgrade because the fixed-orifice design of a damping rod fork can feel harsh and can bottom out. The emulator is engineered to address these limitations, reacting more intelligently to bumps, dive and rebound for improved control and ride quality.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eInstallation does not require full fork disassembly. The emulator sits atop the damping rod and is held securely in place by the existing main spring, making it a straightforward performance upgrade for V-twin riders looking to refine their front-end handling.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Race Tech\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e FEGV S3802\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.47 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Damping rod fork cartridge emulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Adjustable valve replaces fixed orifice\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e No full fork disassembly required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the Race Tech Gold Valve Cartridge Emulator do?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt converts damping rod forks to cartridge-style performance by replacing the fixed orifice with an adjustable damping valve. The result is improved control and ride quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eDo I need to disassemble my forks to install it?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eNo, installation does not require full fork disassembly. The emulator sits atop the damping rod and is held in place by the existing main spring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow is the emulator secured in the fork?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt is held securely in place by the existing main spring, so no additional hardware is needed to keep it seated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the Race Tech Gold Valve Cartridge Emulator do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It converts damping rod forks to cartridge-style performance by replacing the fixed orifice with an adjustable damping valve. The result is improved control and ride quality.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need to disassemble my forks to install it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, installation does not require full fork disassembly. The emulator sits atop the damping rod and is held in place by the existing main spring.\"}}, {\"@type\": \"Question\", \"name\": \"How is the emulator secured in the fork?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is held securely in place by the existing main spring, so no additional hardware is needed to keep it seated.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Race Tech","offers":[{"title":"Default Title","offer_id":53035014193263,"sku":"200-S3802","price":229.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_cda71196-51be-4e4e-9488-bc2dc3bb65a0.png?v=1779559180"},{"product_id":"all-balls-steering-bearing-seal-kit-22-1068","title":"All Balls Steering Bearing\/Seal Kit - Harley Touring \u0026 Trike","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe All Balls Steering Bearing\/Seal Kit (part number 22-1068) is a complete set for overhauling the steering head on a V-twin motorcycle. The kit includes both upper and lower bearings along with all necessary seals, so the steering head can be refreshed in one purchase rather than sourcing individual components.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eWorn steering-head bearings can cause loose steering, imprecise feedback, or a notchy feel through the bars. Replacing the full assembly with this kit is intended to bring steering back to a smooth, responsive condition and help eliminate steering play for a more stable, confident ride.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eReplacing steering head bearings requires precision to ensure proper function and safety. Specialized tools such as a bearing press are often needed for correct installation, so riders should plan accordingly. The kit weighs 1.13 lbs and is well suited to riders who are already performing front-end maintenance or addressing steering issues.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 22-1068\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.13 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Upper and lower steering head bearings, all necessary seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included in this kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes both upper and lower steering head bearings along with all necessary seals for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eDoes the kit require any special tools to install?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eSpecialized tools such as a bearing press are often required for correct installation of steering head bearings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat benefit does replacing the steering head bearings provide?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eReplacing worn bearings helps eliminate steering play and restores a smooth, responsive steering feel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included in this kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes both upper and lower steering head bearings along with all necessary seals for a complete replacement.\"}}, {\"@type\": \"Question\", \"name\": \"Does the kit require any special tools to install?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Specialized tools such as a bearing press are often required for correct installation of steering head bearings.\"}}, {\"@type\": \"Question\", \"name\": \"What benefit does replacing the steering head bearings provide?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Replacing worn bearings helps eliminate steering play and restores a smooth, responsive steering feel.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035014488175,"sku":"22-1068","price":57.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_11858182-e554-4a95-9a2e-f09e292d546d.png?v=1779559192"},{"product_id":"all-balls-fork-seal-kit-22-55119","title":"All Balls Fork Seal Kit - 55-119 - Harley Touring, Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThis All Balls fork seal kit is a replacement set for the front fork seals on a motorcycle. It uses a patented 3-lip design that is built to reduce operating temperature and friction inside the fork, which helps the front end work more smoothly and last longer. Custom elastomer construction is rated to outlast standard seals by 3 to 5 times, so the seals hold up well over time.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit when they want a smoother, more responsive front end. The seals offer 1\/3 to 1\/2 lower stiction than standard factory seals, which means the fork moves with less resistance when it compresses and rebounds. That reduced friction also helps protect internal fork components from premature wear, making the kit a practical choice for preventative maintenance or a full suspension refresh.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit is sold in pairs, so both front forks can be serviced at the same time. Its light weight of 0.15 lbs makes it easy to handle. Whether you are restoring an aging front end or doing a complete suspension overhaul, these seals provide a dependable foundation for consistent handling and rider comfort.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 55-119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Pair of fork seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat makes these fork seals different from standard seals?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey use a patented 3-lip design that reduces operating temperature and wear, along with custom elastomer construction that is rated to outlast OEM seals 3 to 5 times.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow much smoother is the fork action with this kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe seals provide 1\/3 to 1\/2 lower stiction than OEM, which results in a noticeably smoother fork action.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs this kit sold as a single seal or as a set?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt is sold in pairs, providing a complete solution for both front forks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What makes these fork seals different from standard seals?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use a patented 3-lip design that reduces operating temperature and wear, along with custom elastomer construction that is rated to outlast OEM seals 3 to 5 times.\"}}, {\"@type\": \"Question\", \"name\": \"How much smoother is the fork action with this kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The seals provide 1\/3 to 1\/2 lower stiction than OEM, which results in a noticeably smoother fork action.\"}}, {\"@type\": \"Question\", \"name\": \"Is this kit sold as a single seal or as a set?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is sold in pairs, providing a complete solution for both front forks.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035015274607,"sku":"22-55119","price":20.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_f407c6a3-c962-4b25-b941-6278807bdf48.png?v=1779559207"},{"product_id":"all-balls-fork-seal-kit-22-55120","title":"All Balls Fork Seal Kit - Harley Softail, Sportster \u0026 V-Rod","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe All Balls Fork Seal Kit is a front suspension seal kit made for riders who want smoother fork action and longer seal life. It is built around a patented 3-lip design that works to reduce operating temperature and wear, and the kit is rated to last 3 to 5 times longer than OEM fork seals.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit for the friction reduction it provides. It delivers 1\/3 to 1\/2 less stiction, which translates into a more consistent and responsive fork feel over the course of a ride. The kit is sold in pairs and includes all necessary hardware for installation, so the set you receive is ready to work through a complete fork seal replacement.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eWhether you are replacing worn seals or working on a front-end refresh, this All Balls kit offers a practical way to improve how your Harley-Davidson front suspension feels and holds up over time.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 55-120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.14 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Pair of fork seals with all necessary hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStiction Reduction:\u003c\/strong\u003e 1\/3 to 1\/2 less\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifespan:\u003c\/strong\u003e 3-5 times longer than OEM fork seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included with this fork seal kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit is sold in pairs and includes all necessary hardware for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow long do these seals last compared to stock?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese seals are engineered to last 3 to 5 times longer than typical OEM fork seals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the patented 3-lip design do?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe patented balanced 3-lip design minimizes operating temperature and wear, which helps the seals hold up longer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included with this fork seal kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit is sold in pairs and includes all necessary hardware for installation.\"}}, {\"@type\": \"Question\", \"name\": \"How long do these seals last compared to stock?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These seals are engineered to last 3 to 5 times longer than typical OEM fork seals.\"}}, {\"@type\": \"Question\", \"name\": \"What does the patented 3-lip design do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The patented balanced 3-lip design minimizes operating temperature and wear, which helps the seals hold up longer.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035015307375,"sku":"22-55120","price":19.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_4fe433f4-fe0c-4d1a-bd79-b6d7e156e858.png?v=1779559206"},{"product_id":"all-balls-fork-seal-kit-22-55129","title":"All Balls Fork Seal Kit - 55-129 - Harley Touring, Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe All Balls 55-129 fork seal kit is a replacement set for front fork seals, built to reduce friction and wear in the front end of your motorcycle. The kit uses a patented 3-lip design that distributes pressure evenly, which helps lower operating temperature and reduce wear on the seal during use. Riders choose it when they want smoother fork action and a longer-lasting seal than the original equipment seals.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe seals are made from custom elastomer construction, which the product lists as lasting 3 to 5 times longer than OEM seals. The design also delivers 1\/3 to 1\/2 less stiction, meaning the forks move more freely and respond more consistently over bumps and changes in direction. Less friction also helps protect internal fork components from accelerated wear, supporting better control and a more refined ride.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit is sold in pairs and is offered as a drop-in replacement for V-twin forks. It is a practical choice for routine maintenance or a full suspension overhaul where you want a dependable seal set with improved durability and smoother performance.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 55-129\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Design:\u003c\/strong\u003e Patented 3-lip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Custom elastomer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.14 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat makes this fork seal kit different from standard seals?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt uses a patented 3-lip design and custom elastomer construction, which the product lists as lasting 3 to 5 times longer than OEM seals while reducing stiction by 1\/3 to 1\/2.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow many seals come in the kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit is sold in pairs, so you receive a set of seals for the front fork.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is the part number for this kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe manufacturer part number is 55-129.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What makes this fork seal kit different from standard seals?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It uses a patented 3-lip design and custom elastomer construction, which the product lists as lasting 3 to 5 times longer than OEM seals while reducing stiction by 1\/3 to 1\/2.\"}}, {\"@type\": \"Question\", \"name\": \"How many seals come in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit is sold in pairs, so you receive a set of seals for the front fork.\"}}, {\"@type\": \"Question\", \"name\": \"What is the part number for this kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The manufacturer part number is 55-129.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035015405679,"sku":"22-55129","price":19.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_a0d4440b-009d-4d2a-8948-2399a279f238.png?v=1779559208"},{"product_id":"all-balls-fork-dust-seal-wiper-kit-and-dust-seal-wiper-kit-22-56132","title":"All Balls Fork\/Dust Seal Wiper Kit - 56-132 - Harley \u0026 Indian V-Twin","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe All Balls Fork\/Dust Seal Wiper Kit (part number 56-132) is a front suspension seal and dust wiper kit for Harley-Davidson and Indian V-twin motorcycles. It is designed to reduce friction and wear in the fork so the front end moves more smoothly and lasts longer.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit uses a patented 3-lip seal design that reduces pressure and wear on the seal. A custom elastomer compound is used for extended durability, and the design minimizes stiction so the fork action feels smoother. Matching dust wipers are included to help keep contaminants out and extend seal life.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders who want a more consistent, responsive front end and longer-lasting fork seals will find this kit a practical upgrade. It is a complete solution for servicing the forks, and the kit weighs 0.24 lbs.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 56-132\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Fork seals and matching dust wipers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Patented 3-lip seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Material:\u003c\/strong\u003e Custom elastomer compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is the All Balls 56-132 kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt is a fork and dust seal wiper kit for the front suspension of Harley-Davidson and Indian V-twin motorcycles, built to reduce friction and wear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat makes the seals different?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe seals use a patented 3-lip design and a custom elastomer compound, which reduces pressure and wear and minimizes stiction for smoother fork action.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eDoes the kit include dust protection?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the kit includes matching dust wipers to help protect against contaminants and extend seal life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the All Balls 56-132 kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is a fork and dust seal wiper kit for the front suspension of Harley-Davidson and Indian V-twin motorcycles, built to reduce friction and wear.\"}}, {\"@type\": \"Question\", \"name\": \"What makes the seals different?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The seals use a patented 3-lip design and a custom elastomer compound, which reduces pressure and wear and minimizes stiction for smoother fork action.\"}}, {\"@type\": \"Question\", \"name\": \"Does the kit include dust protection?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the kit includes matching dust wipers to help protect against contaminants and extend seal life.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035015503983,"sku":"22-56132","price":43.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_b8d28bbd-92d4-430f-aa27-18fa85e6f520.png?v=1779559220"},{"product_id":"all-balls-fork-dust-seal-wiper-kit-and-dust-seal-wiper-kit-22-56144","title":"All Balls Fork\/Dust Seal Wiper Kit - Harley-Davidson Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe All Balls Fork and Dust Seal Wiper Kit is a front suspension service kit that includes both fork seals and dust wipers. It uses custom elastomer seals built on a patented 3-lip design that is balanced to reduce internal pressure, temperature, and friction within the fork.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit to refresh tired front suspension and get smoother fork action. The seals are designed to outlast standard OEM components, and the design significantly reduces stiction, which helps the fork respond more evenly and feel more controlled through the stroke.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eBecause the kit covers both the fork seals and the dust wipers, it provides a complete service for the front end. Extending seal life and improving fork action gives riders more consistent handling and a more enjoyable ride over time.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 56-144\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.24 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Fork seals and dust wipers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Design:\u003c\/strong\u003e Patented 3-lip design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Material:\u003c\/strong\u003e Custom elastomer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included in the All Balls Fork and Dust Seal Wiper Kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes both fork seals and dust wipers, allowing a complete front suspension service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat makes the seals in this kit different?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe seals use a patented 3-lip balanced design and custom elastomer construction, which reduces internal pressure, temperature, and friction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow does this kit affect fork performance?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt significantly reduces stiction, which helps the fork action feel smoother and more responsive.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included in the All Balls Fork and Dust Seal Wiper Kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes both fork seals and dust wipers, allowing a complete front suspension service.\"}}, {\"@type\": \"Question\", \"name\": \"What makes the seals in this kit different?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The seals use a patented 3-lip balanced design and custom elastomer construction, which reduces internal pressure, temperature, and friction.\"}}, {\"@type\": \"Question\", \"name\": \"How does this kit affect fork performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It significantly reduces stiction, which helps the fork action feel smoother and more responsive.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035015635055,"sku":"22-56144","price":42.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_f1172737-0372-4b26-b4d7-089a31cf20f0.png?v=1779559218"},{"product_id":"all-balls-swingarm-bearing-kit-22-81095","title":"All Balls Swingarm Bearing Kit - Harley Softail 1984-1999","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe All Balls Swingarm Bearing Kit is a complete set for replacing worn swingarm bearings and seals on the rear suspension. Loose or imprecise rear-end feel often points to tired swingarm bearings, and this kit gives you the components needed to restore a tracking, true feel.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit includes OEM-quality bearings and seals, so you get the parts you need in one package instead of sourcing individual components. This simplifies a straightforward swingarm rebuild and saves time and hassle during the job.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eReplacing swingarm bearings is a key part of keeping rear suspension stable and predictable. Once installed, the swingarm pivots smoothly, which supports confident handling and a more enjoyable ride. The kit suits riders doing a full suspension overhaul or addressing wear on an older motorcycle.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 28-1095\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.46 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Swingarm bearing kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e OEM-quality bearings and seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included in this kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit contains OEM-quality bearings and seals for a swingarm bearing replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhy replace swingarm bearings?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eWorn swingarm bearings can cause the rear end to feel loose or imprecise, and replacing them helps restore stable, precise handling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs this kit a complete solution?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, it is a complete kit designed to simplify a straightforward swingarm rebuild without tracking down individual components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included in this kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit contains OEM-quality bearings and seals for a swingarm bearing replacement.\"}}, {\"@type\": \"Question\", \"name\": \"Why replace swingarm bearings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Worn swingarm bearings can cause the rear end to feel loose or imprecise, and replacing them helps restore stable, precise handling.\"}}, {\"@type\": \"Question\", \"name\": \"Is this kit a complete solution?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, it is a complete kit designed to simplify a straightforward swingarm rebuild without tracking down individual components.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035015700591,"sku":"22-81095","price":64.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_1b8aba54-28b5-413d-a198-1114b9f77abc.png?v=1779559217"},{"product_id":"all-balls-swingarm-bearing-kit-22-81139","title":"All Balls Swingarm Bearing Kit - Harley Softail 2000-2024","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe All Balls Swingarm Bearing Kit is a complete set of bearings and seals for replacing worn swingarm pivot components. Rather than sourcing individual parts, riders get everything needed for a swingarm pivot refresh in one package, which makes the job more straightforward.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit for its OEM-quality bearings and seals, which are intended for long-lasting performance. Restoring the swingarm pivot helps keep rear suspension travel smooth and predictable, and helps the rear wheel track correctly for a more stable, confidence-inspiring ride.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eWhether you are doing routine maintenance or chasing a specific handling issue, this kit is a practical way to refresh the rear suspension of a V-twin motorcycle. It is a direct replacement for the original swingarm pivot components, with a weight of 0.42 lbs and All Balls part number 28-1139.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e All Balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 28-1139\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.42 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Swingarm Bearing Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does this kit include?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit supplies the bearings and seals needed to replace worn swingarm pivot components in one package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre the bearings and seals OEM quality?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the kit features OEM-quality bearings and seals for reliable durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does this kit help restore?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt helps restore smooth and predictable rear suspension travel and keeps the rear wheel tracking correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does this kit include?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit supplies the bearings and seals needed to replace worn swingarm pivot components in one package.\"}}, {\"@type\": \"Question\", \"name\": \"Are the bearings and seals OEM quality?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the kit features OEM-quality bearings and seals for reliable durability.\"}}, {\"@type\": \"Question\", \"name\": \"What does this kit help restore?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It helps restore smooth and predictable rear suspension travel and keeps the rear wheel tracking correctly.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"All Balls","offers":[{"title":"Default Title","offer_id":53035015766127,"sku":"22-81139","price":59.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_a6cb71e5-df8e-4d94-8d9b-6c6f567eb03a.png?v=1779559224"},{"product_id":"harddrive-softail-lowering-kit-stainless-fits-2000-2017-softail-820-1747","title":"Harddrive Softail Lowering Kit Stainless 0-2 Inch Drop - Harley Softail","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasily lowers your Softail up to 2”\u003c\/li\u003e\n\u003cli\u003eAdjustable to allow lowering between 0” and 2”\u003c\/li\u003e\n\u003cli\u003eFits most Softails from 2000-2015 (except FXCW\/FXCWC, FLSTFB, FLSTSB, FLSTN, FXSTD, FXS, FXSB, and FLS or models with profile lowering kits)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier description:\u003c\/strong\u003e REAR ADJUSTABLE  LOWERING KIT STAINLESS FITS 00-17 SOFTAIL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 23-0322\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361143687\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.60 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Taiwan)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm fitment for your bike in the Fitment tab before ordering.\u003c\/p\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035416354927,"sku":"820-1747","price":97.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_6bbb5bb3-47c6-4f9d-8caa-f1f29e9c619a.png?v=1779562658"},{"product_id":"harddrive-fork-boot-230mm-black-f-41mm-fork-820-50301","title":"Harddrive Fork Boot 230mm Black - 41mm Harley \u0026 Indian Forks","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive Fork Boot is a 230mm black accordion-style dust cover that slides over the fork leg to protect the fork seals from road grit, dirt, and moisture. Designed for 41mm fork tubes, it gives your front end a layer of defense against the debris that the front suspension takes on every ride.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this boot because it shields the fork seals and chrome fork legs, helping to keep them cleaner and reducing the chance of pitting. Its flexible accordion design is meant to move with the forks through their full range of travel without binding, so the suspension keeps working as it should. Keeping moisture and dust out of the seals also helps extend the service life of your suspension.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eInstallation is a straightforward way to add protection to the front end. The boot is part of the Harddrive line and is offered in black to match the look of your bike's front end. Harddrive Fork Boot, 230mm, black, part number 359020, weighs 1.04 lbs.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 359020\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 230mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFork Tube Size:\u003c\/strong\u003e 41mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Accordion-style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.04 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat size fork tubes is this boot designed for?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe Harddrive Fork Boot is designed for 41mm fork tubes and has a 230mm length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow does the accordion design work with the suspension?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe accordion-style design is intended to allow full suspension travel without binding as the forks move.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the fork boot protect against?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt seals out road dirt, dust, and moisture from the fork seals and helps protect the chrome fork legs from pitting and corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What size fork tubes is this boot designed for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Harddrive Fork Boot is designed for 41mm fork tubes and has a 230mm length.\"}}, {\"@type\": \"Question\", \"name\": \"How does the accordion design work with the suspension?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The accordion-style design is intended to allow full suspension travel without binding as the forks move.\"}}, {\"@type\": \"Question\", \"name\": \"What does the fork boot protect against?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It seals out road dirt, dust, and moisture from the fork seals and helps protect the chrome fork legs from pitting and corrosion.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035420844143,"sku":"820-50301","price":47.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_887f149c-3eac-4393-b2ea-ebfadb57f1b1.png?v=1779561535"},{"product_id":"harddrive-fork-boot-39mm-xl-fxr-820-50303","title":"Harddrive Fork Boot 39mm - Harley-Davidson XL \u0026 FXR","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive Fork Boot 39mm is a durable rubber dust cover that protects the front suspension on 39mm fork tubes. It forms a barrier that keeps road dirt, road salt, and moisture away from the fork internals, helping guard the fork seals and chrome that are exposed to the elements.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this boot to reduce premature wear on fork seals and chrome. Constant exposure to debris can shorten the life of these parts, and the boot provides a simple shield that helps maintain consistent fork performance and can reduce how often maintenance is needed. Its rubber construction is designed for long-lasting use.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eInstallation is straightforward. The boot slides over the fork tube without requiring special tools or extensive disassembly, making it a quick way to add protection to your front end. Harddrive part number 359023 weighs 0.5538 lbs.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 359023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFork Tube Size:\u003c\/strong\u003e 39mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5538 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e No special tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the Harddrive Fork Boot protect against?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt seals out road dirt, road salt, and moisture to help protect fork seals and chrome internals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material is the fork boot made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt is made from durable rubber construction designed for long-lasting use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eDoes installation require special tools?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eNo, the boot is designed for easy installation with no special tools required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the Harddrive Fork Boot protect against?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It seals out road dirt, road salt, and moisture to help protect fork seals and chrome internals.\"}}, {\"@type\": \"Question\", \"name\": \"What material is the fork boot made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is made from durable rubber construction designed for long-lasting use.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require special tools?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, the boot is designed for easy installation with no special tools required.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035420876911,"sku":"820-50303","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_85f22074-2056-4329-99ae-bfed34eb2f8b.png?v=1779561609"},{"product_id":"harddrive-fork-tube-assembly-24-1-2-standard-fxst-fxdwg-820-52319","title":"Harddrive 24-1\/2\" Standard Hard Chrome Fork Tube Assembly - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive 24-1\/2\" Standard Hard Chrome Fork Tube Assembly is a pair of front fork tubes for riders looking to refresh or replace the front suspension on a V-twin bike. Sold as a pair, these tubes give you a complete front end service in one purchase, with a standard overall length of 24-1\/2 inches.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose these tubes for the hard chrome finish, which adds durability and helps the fork action stay smooth over time. The assembly is designed to deliver consistent suspension performance, helping restore or maintain the handling and ride quality of the front end.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eBecause the tubes are sold as a pair, you can replace both sides at once so the front end is balanced and matched. The 16.64 lb weight is listed in the specs, and the part number 094154 makes it easy to reference when ordering or comparing options. Measure your existing fork tube length before purchase to confirm this standard length is the right match for your setup.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094154\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 24-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.64 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included with this fork tube assembly?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThis listing is sold as a pair of 24-1\/2\" standard hard chrome fork tubes, allowing a complete front end service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do these fork tubes have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey feature a hard chrome finish, which is intended to provide durability and smooth fork action.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow long are the fork tubes?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe standard overall length is 24-1\/2 inches, so measure your existing tubes end to end before ordering to confirm the correct match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included with this fork tube assembly?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This listing is sold as a pair of 24-1\/2\\\" standard hard chrome fork tubes, allowing a complete front end service.\"}}, {\"@type\": \"Question\", \"name\": \"What finish do these fork tubes have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They feature a hard chrome finish, which is intended to provide durability and smooth fork action.\"}}, {\"@type\": \"Question\", \"name\": \"How long are the fork tubes?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The standard overall length is 24-1\/2 inches, so measure your existing tubes end to end before ordering to confirm the correct match.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429462127,"sku":"820-52319","price":531.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_1bf8baae-4e97-4e19-9cb3-c39f241da473.png?v=1779565346"},{"product_id":"harddrive-fork-tube-assembly-26-1-2-o-s-fxst-fxdwg-820-52320","title":"Harddrive 26-1\/2\" Hard Chrome Fork Tube Assembly - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive 26-1\/2\" Hard Chrome Fork Tube Assembly is a pair of front fork tubes for riders who want to refresh or upgrade the front end of their motorcycle. Sold as a pair, these tubes give you what you need for a complete front end service in one purchase.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose these tubes for the hard chrome finish, which is built for durability and smooth action as the forks cycle through their travel. At 26-1\/2 inches overall length, they are designed to deliver the consistent suspension performance you expect from a responsive, stable front end. The chrome also gives the forks a classic look that suits a wide range of V-twin builds.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eBefore you order, measure your existing fork tubes from end to end to confirm the 26-1\/2\" length is the right match for your bike. With a hard chrome finish, a 17.77 lb weight, and a sold-as-a-pair package, this assembly is a practical choice for restoring handling and ride quality or preparing a custom build.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094214\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 26-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.77 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish does this fork tube assembly have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt has a hard chrome finish, which is designed for durability and smooth action.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs this assembly sold as a single tube or a pair?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt is sold as a pair, so you get two tubes for a complete front end service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is the overall length of these fork tubes?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe overall length is 26-1\/2 inches. Measure your existing tubes end to end before ordering to confirm the length matches your needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish does this fork tube assembly have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a hard chrome finish, which is designed for durability and smooth action.\"}}, {\"@type\": \"Question\", \"name\": \"Is this assembly sold as a single tube or a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is sold as a pair, so you get two tubes for a complete front end service.\"}}, {\"@type\": \"Question\", \"name\": \"What is the overall length of these fork tubes?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The overall length is 26-1\/2 inches. Measure your existing tubes end to end before ordering to confirm the length matches your needs.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429494895,"sku":"820-52320","price":462.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_8c263f0b-2155-4934-91a3-fa37fe5b02e0.png?v=1779561775"},{"product_id":"harddrive-fork-tube-tubes-22-1-2-u-s-fxstfxdwg-820-52325","title":"Harddrive 22-1\/2\" Hard Chrome Fork Tubes - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHarddrive 22-1\/2\" hard chrome fork tubes are a front suspension component sold as a pair, giving you both sides of the fork for a complete front-end service or rebuild. Each tube features a hard chrome finish that is meant to hold up to the demands of riding.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose these tubes when it is time to restore front-end handling and ride quality, whether replacing worn components or upgrading the suspension. The hard chrome finish adds durability and corrosion resistance, and the tubes are offered with or without internal damper and spring assemblies, so you can pick the option that suits your rebuild.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eBecause the tubes are sold in pairs, both sides can be serviced together for consistent performance. Before ordering, measure your existing fork tubes to confirm the correct length. Harddrive 22-1\/2\" hard chrome fork tubes are a practical choice for a front-end refresh on a V-twin.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 22-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e With or without internal damper and springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094163\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.64 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do these fork tubes have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey have a hard chrome finish, which is intended to provide durability and corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre the fork tubes sold individually or as a pair?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are sold as a pair, which allows for a complete front fork service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan I choose whether the tubes include internal damper and springs?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, they are available with or without internal damper and spring assemblies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish do these fork tubes have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They have a hard chrome finish, which is intended to provide durability and corrosion resistance.\"}}, {\"@type\": \"Question\", \"name\": \"Are the fork tubes sold individually or as a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are sold as a pair, which allows for a complete front fork service.\"}}, {\"@type\": \"Question\", \"name\": \"Can I choose whether the tubes include internal damper and springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, they are available with or without internal damper and spring assemblies.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429527663,"sku":"820-52325","price":254.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_2eddfa17-f59c-4ed4-bb0c-e0899705d2e4.png?v=1779561780"},{"product_id":"harddrive-fork-tube-tubes-24-1-2-std-fxst-fxdwg-820-52326","title":"Harddrive 24-1\/2\" Hard Chrome Fork Tube - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive 24-1\/2\" hard chrome fork tube is a replacement front suspension component for riders who need to refresh or rebuild their front end. It can be used to replace a single worn or damaged tube or as part of a complete front-end rebuild, giving you a durable option for restoring stable handling on your V-twin.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this fork tube for its hard chrome finish, which provides excellent durability and resists corrosion and wear for long-lasting use. It is offered with or without an internal damper and springs, so you can select the configuration that suits your rebuild. Its construction provides a solid foundation for front-end stability and control, and it is a critical component for front suspension integrity.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eBecause fork tube length can vary, measure your existing tubes to confirm the correct dimensions before ordering. If you are rebuilding the full front end, plan to order a pair.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 24-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.32 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094162\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e With or without internal damper and springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish does this fork tube have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt has a hard chrome finish that provides excellent durability and resists corrosion and wear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan I choose a version with or without internal components?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, it is available with or without an internal damper and springs to suit your rebuild needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat length is this fork tube?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThis Harddrive fork tube is 24-1\/2 inches long. Measure your existing tubes to confirm the correct length before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish does this fork tube have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a hard chrome finish that provides excellent durability and resists corrosion and wear.\"}}, {\"@type\": \"Question\", \"name\": \"Can I choose a version with or without internal components?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, it is available with or without an internal damper and springs to suit your rebuild needs.\"}}, {\"@type\": \"Question\", \"name\": \"What length is this fork tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This Harddrive fork tube is 24-1\/2 inches long. Measure your existing tubes to confirm the correct length before ordering.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429593199,"sku":"820-52326","price":295.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_17c40271-7a3d-421b-9a0e-a82c7ac4578a.png?v=1779562936"},{"product_id":"harddrive-fork-tube-tubes-26-1-2-o-s-fxst-fxdwg-820-52327","title":"Harddrive 26-1\/2\" Hard Chrome Fork Tubes - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHarddrive 26-1\/2\" hard chrome fork tubes are sold as a pair, giving you what you need for a complete front-end service. Each tube uses a hard chrome finish that is built for durability and a long working life in the front suspension.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eWorn fork tubes can affect how your V-twin handles and how comfortable the ride feels. These Harddrive tubes are designed as a direct replacement, so you can refresh the feel of your front suspension and restore its performance. Because they are sold as a pair, you can replace both sides together during a front-end rebuild or upgrade and keep the suspension balanced. The hard chrome surface helps the tubes hold up to wear over time, which supports steady front-end stability and control every time you ride.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 26-1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8156 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do these fork tubes have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey have a hard chrome finish that is designed for maximum durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre these fork tubes sold individually?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eNo, they are sold as a pair, which is convenient for a full front-end service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is the part number?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe manufacturer part number is 094261.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish do these fork tubes have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They have a hard chrome finish that is designed for maximum durability.\"}}, {\"@type\": \"Question\", \"name\": \"Are these fork tubes sold individually?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, they are sold as a pair, which is convenient for a full front-end service.\"}}, {\"@type\": \"Question\", \"name\": \"What is the part number?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The manufacturer part number is 094261.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429658735,"sku":"820-52327","price":254.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/73b6-5b6c6a3322111.jpg?v=1777528511"},{"product_id":"harddrive-fork-tube-tubes-28-1-2-o-s-fxst-fxdwg-820-52328","title":"Harddrive 28-1\/2\" Hard Chrome Fork Tubes - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive 28-1\/2\" hard chrome fork tubes are a replacement pair for riders restoring or upgrading their front suspension. Sold as a pair, they cover complete front-end work, whether you are rebuilding the entire front end or replacing damaged tubes alone.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eOver time, fork tubes can become pitted or worn, which compromises suspension performance and makes the ride uncomfortable. These hard chrome tubes offer a robust replacement that helps restore smooth suspension action and sharp handling. The hard chrome finish provides exceptional durability and resistance to wear, so the tubes hold up well after installation.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThese fork tubes are available with or without internal damper, spring, and cap assemblies, so you can choose the configuration that suits your service. Harddrive built them to deliver a high-quality solution for V-twin riders who want their front suspension dialed in.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094262\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 28-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Available with or without internal suspension components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do these fork tubes have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey have a hard chrome finish that provides superior protection and resistance to wear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre the fork tubes sold individually?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eNo, they are sold as a pair for a complete and balanced front-end service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan I get these with internal suspension components?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, they are available with or without internal damper, spring, and cap assemblies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish do these fork tubes have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They have a hard chrome finish that provides superior protection and resistance to wear.\"}}, {\"@type\": \"Question\", \"name\": \"Are the fork tubes sold individually?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, they are sold as a pair for a complete and balanced front-end service.\"}}, {\"@type\": \"Question\", \"name\": \"Can I get these with internal suspension components?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, they are available with or without internal damper, spring, and cap assemblies.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429625967,"sku":"820-52328","price":356.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/344d-5b6c6a64dafc6.jpg?v=1777528511"},{"product_id":"harddrive-fork-tube-tubes-30-1-2-o-s-fxst-fxdwg-820-52329","title":"Harddrive 30-1\/2\" Hard Chrome Fork Tubes - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHarddrive 30-1\/2\" hard chrome fork tubes are sold as a pair, giving you both sides of the front fork in one purchase for a complete front fork service. The tubes feature a hard chrome finish that is built for long service life and resists wear over time.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThese tubes are available with or without internal damper assemblies, so you can choose the configuration that suits your front-end work. Their 30-1\/2\" length is the key dimension to confirm before ordering, since fork tube length varies between motorcycles. Measure the overall length of your existing tubes to make sure this size is correct for your bike.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHard chrome fork tubes are a practical choice for riders restoring or refreshing the suspension on a Harley-Davidson V-twin. The item weighs 14.6955 lbs as a pair, and the manufacturer part number is 094172.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094172\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 30-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.6955 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption:\u003c\/strong\u003e With or without internal damper assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do these fork tubes have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey have a hard chrome finish that is designed for exceptional longevity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre the fork tubes sold individually or as a pair?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are sold as a pair, which supports a complete front fork service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre internal damper assemblies included?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are available with or without internal damper assemblies, so you can choose the option you need.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish do these fork tubes have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They have a hard chrome finish that is designed for exceptional longevity.\"}}, {\"@type\": \"Question\", \"name\": \"Are the fork tubes sold individually or as a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are sold as a pair, which supports a complete front fork service.\"}}, {\"@type\": \"Question\", \"name\": \"Are internal damper assemblies included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are available with or without internal damper assemblies, so you can choose the option you need.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429691503,"sku":"820-52329","price":311.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/8168-5a3d5fa0a0b9a.jpg?v=1777528511"},{"product_id":"harddrive-fork-tube-tubes-32-1-2-o-s-fxst-fxdwg-820-52330","title":"Harddrive 32-1\/2\" Hard Chrome Fork Tubes - Harley Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHarddrive 32-1\/2\" hard chrome fork tubes are a replacement pair for the front suspension of select Harley-Davidson models. Sold as a pair, they cover a complete front fork service, whether you are restoring an older front end or refreshing one that has worn out.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe hard chrome finish is the main reason riders choose these tubes. It holds up well to wear and gives the fork tube a durable surface that stays smooth under regular use. Each tube is 32-1\/2 inches long, and the set weighs 14.244 lbs.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eYou can choose the version that suits your rebuild. These tubes are available with or without internal damper and spring assemblies, so you can add those components if your project calls for them or leave them out if you already have them.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eMeasure the overall length of your existing fork tubes before ordering to confirm that the 32-1\/2\" length matches your setup.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094173\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 32-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e With or without internal damper and springs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.244 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do these fork tubes have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey have a hard chrome finish, which is chosen for long-lasting durability and resistance to wear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre the fork tubes sold individually or as a pair?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are sold as a pair, which covers a complete front fork service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eDo the fork tubes come with internal dampers and springs?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are available with or without internal damper and spring assemblies, so you can select the version you need.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish do these fork tubes have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They have a hard chrome finish, which is chosen for long-lasting durability and resistance to wear.\"}}, {\"@type\": \"Question\", \"name\": \"Are the fork tubes sold individually or as a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are sold as a pair, which covers a complete front fork service.\"}}, {\"@type\": \"Question\", \"name\": \"Do the fork tubes come with internal dampers and springs?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are available with or without internal damper and spring assemblies, so you can select the version you need.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035429757039,"sku":"820-52330","price":357.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_10956d51-3c99-46ac-8dd3-66dd84b8ae53.png?v=1779561788"},{"product_id":"harddrive-fork-tube-tubes-20-5-std-flh-flt-except-2002-2005-820-52345","title":"Harddrive 20.5\" Hard Chrome Standard Length Fork Tubes - Harley Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThese Harddrive 20.5-inch standard length fork tubes are sold as a pair, covering both sides of the front end so a replacement is handled in one purchase. The hard chrome finish provides added durability and corrosion protection for the tube surface.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose replacement fork tubes when factory components show wear, pitting, corrosion, or minor bends. Replacing them is intended to restore smooth suspension action and precise handling at the front of the motorcycle, which affects both comfort and control.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe 20.5-inch standard length is the key dimension of this set, and the hard chrome surface is designed to resist wear and the elements so the suspension can keep performing as intended over time. Measure your existing tubes before ordering to confirm the length matches your setup.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094264\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 20.5 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11.1709 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do these fork tubes have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey have a hard chrome finish, which is intended to provide enhanced durability and corrosion protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre these sold individually or as a pair?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are sold as a pair, which covers a complete front end replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat length are these fork tubes?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese are 20.5-inch standard length fork tubes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish do these fork tubes have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They have a hard chrome finish, which is intended to provide enhanced durability and corrosion protection.\"}}, {\"@type\": \"Question\", \"name\": \"Are these sold individually or as a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are sold as a pair, which covers a complete front end replacement.\"}}, {\"@type\": \"Question\", \"name\": \"What length are these fork tubes?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These are 20.5-inch standard length fork tubes.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035430543471,"sku":"820-52345","price":281.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_94fed7e2-fa91-47df-9a59-960f326b6274.png?v=1779561644"},{"product_id":"harddrive-fork-slider-cover-tube-covers-chrome-touring-1984-2013-flst-1986-20-820-52372","title":"Harddrive Fork Slider Cover Chrome - Harley Softail \u0026 Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHarddrive Fork Slider Covers add a layer of protection and a touch of classic chrome to the front end of your ride. Each cover is made from high-grade steel and finished in polished chrome, shielding the fork tubes from road debris and weathering.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose these covers for their durable construction and bright, timeless look. The high-grade steel is built to hold up to everyday road use, while the polished chrome finish gives the fork a clean, classic appearance that pairs well with other chrome accents on a V-twin. The finish is designed to match factory Harley hardware, helping the front end look cohesive.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe covers are designed for a straightforward installation and bolt onto the stock fork sliders without requiring any modifications to the bike. They are a practical way to protect the fork legs from road grime, chips and environmental wear while enhancing the look of the front suspension.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-grade steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polished chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 301189\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.41 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material are these fork slider covers made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are constructed from high-grade steel for long-lasting durability on the road.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do the covers have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe covers feature a polished chrome finish designed to match factory Harley hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eDo the covers require modifications to install?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eNo, they bolt directly onto the stock fork sliders without requiring any modifications to the bike.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What material are these fork slider covers made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are constructed from high-grade steel for long-lasting durability on the road.\"}}, {\"@type\": \"Question\", \"name\": \"What finish do the covers have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The covers feature a polished chrome finish designed to match factory Harley hardware.\"}}, {\"@type\": \"Question\", \"name\": \"Do the covers require modifications to install?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, they bolt directly onto the stock fork sliders without requiring any modifications to the bike.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035432247407,"sku":"820-52372","price":103.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_67897935-1173-4ab3-9ef0-e0b8d55032c3.png?v=1779561661"},{"product_id":"harddrive-fork-slider-cover-tube-covers-black-touring-1984-2013-flst-1986-2014-820-52373","title":"Harddrive Fork Slider Cover Black - Harley Softail \u0026 Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHarddrive Fork Slider Covers in black shield the front fork tubes from road debris and impact. Made from high-grade steel, the covers are built to handle the wear of regular riding while giving the front end a clean, dark look.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe covers feature a black powder-coat finish that adds a custom contrast or blends into blacked-out builds. The design works as a direct replacement for factory slider covers, so the swap stays simple. The steel construction and powder-coat finish together make these covers a practical choice for riders who want protection for their fork tubes along with a sleek appearance.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eWeighing 1.45 lbs, these covers add minimal weight while protecting the exposed fork tubes from rocks, road grime and environmental damage. Harddrive part number 301166 is an easy reference when comparing or ordering replacements.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 301166\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-grade steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black powder-coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.45 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Fork slider covers, direct replacement for OEM covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material are these fork slider covers made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are made from high-grade steel for durability against road debris and impact.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish do the covers have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe covers have a black powder-coat finish for a custom look.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre these a direct replacement for factory covers?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, they are designed as a direct replacement for OEM slider covers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What material are these fork slider covers made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are made from high-grade steel for durability against road debris and impact.\"}}, {\"@type\": \"Question\", \"name\": \"What finish do the covers have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The covers have a black powder-coat finish for a custom look.\"}}, {\"@type\": \"Question\", \"name\": \"Are these a direct replacement for factory covers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, they are designed as a direct replacement for OEM slider covers.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035432280175,"sku":"820-52373","price":115.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_a4fc87e5-a02e-4dcd-a48f-aa4ee1fd63a7.png?v=1779565363"},{"product_id":"harddrive-fork-slider-cover-tube-cvrs-chrome-2-touring-1984-2013-flst-1986-820-52374","title":"Harddrive Fork Slider Cover Chrome +2\" Extended - Harley Softail \u0026 Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eHarddrive +2\" Extended Fork Slider Covers in chrome give your front end a stretched, custom look while shielding the fork tubes from road debris. They are built from high-grade steel for durability and finished in chrome for a premium, show-quality appearance.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe +2\" extended length adds a longer, more aggressive profile compared with stock covers. Riders choose them to upgrade the visual line of the front end while keeping the fork tubes protected from road hazards and environmental wear. The covers protect the fork tubes without affecting suspension operation.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe covers are designed for straightforward installation. They bolt directly to the existing fork tubes using OEM-style mounting points, with no drilling or modifications required. This makes them a functional and visually striking chrome upgrade for the front end of a V-twin bike.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 301191\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-grade steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e +2\" extended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.985 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Bolts to existing fork tubes, no drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material are these fork slider covers made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are constructed from high-grade steel for durability and strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow much longer are these covers than stock?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe Harddrive covers add 2 inches of extension over stock for a stretched appearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eDo they require drilling to install?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eNo. They bolt directly onto the existing fork tubes using OEM-style mounting points, requiring no drilling or modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What material are these fork slider covers made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are constructed from high-grade steel for durability and strength.\"}}, {\"@type\": \"Question\", \"name\": \"How much longer are these covers than stock?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Harddrive covers add 2 inches of extension over stock for a stretched appearance.\"}}, {\"@type\": \"Question\", \"name\": \"Do they require drilling to install?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. They bolt directly onto the existing fork tubes using OEM-style mounting points, requiring no drilling or modifications.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035432345711,"sku":"820-52374","price":119.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_9ca11c41-ad77-4974-b5cd-11af815e151d.png?v=1779561801"},{"product_id":"harddrive-fork-slider-cover-tube-covers-black-2-touring-1984-2013-flst-1986-820-52375","title":"Harddrive +2 Fork Slider Covers Black - Harley Softail \u0026 Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive +2 Fork Slider Covers are built to protect extended fork tubes from road grit, debris, and impact. Designed specifically for +2 extended fork tubes, these black covers shield the fork tubes from road debris and corrosion while adding a clean, finished look to the front end.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders running +2 extended forks need extra protection from the elements. These covers are made from robust steel construction for maximum durability, helping keep the fork tubes free from nicks, scratches, and corrosion. The sleek black finish complements the bike's overall aesthetic and integrates neatly with the front end.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThese fork slider covers offer a straightforward way to add an extra layer of protection and a custom look to the ride. They are designed for easy installation, making them a practical option for anyone looking to upgrade the protection of their extended forks with a durable, good-looking part.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 301167\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.69 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Fork Slider Covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is the Harddrive 301167 made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese fork slider covers are made from robust steel construction for long-lasting durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat fork style are these covers designed for?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey are specifically designed for +2 extended fork tubes and help shield them from road debris and corrosion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat color is the finish?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe covers have a sleek black finish that complements the front end's style.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is the Harddrive 301167 made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These fork slider covers are made from robust steel construction for long-lasting durability.\"}}, {\"@type\": \"Question\", \"name\": \"What fork style are these covers designed for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are specifically designed for +2 extended fork tubes and help shield them from road debris and corrosion.\"}}, {\"@type\": \"Question\", \"name\": \"What color is the finish?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The covers have a sleek black finish that complements the front end's style.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035432444015,"sku":"820-52375","price":123.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_0d473fb3-bf4d-4e0f-aacc-a3b1bdf67e62.png?v=1779561671"},{"product_id":"wild-1-softail-lowering-kit-evo-softails-830-0200","title":"Wild 1 Softail Adjustable Lowering Kit - Harley Softail EVO","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Wild 1 Adjustable Lowering Kit gives V-twin riders adjustable ride height control, letting them fine-tune the stance of their motorcycle to suit their own look and preferences. It is a practical way to build a personalized bike profile without changing anything else about the machine.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThis kit includes all necessary mounting hardware, so the components needed to carry out the lowering setup are supplied together. Riders who want a specific aesthetic or a lower reach to the ground will find the adjustable design useful for dialing in the ride height they prefer.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eBecause modifying suspension affects handling, professional installation by a certified mechanic is recommended to keep the suspension geometry correctly maintained and all components installed safely and securely.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Wild 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e WO200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.19 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e All necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Adjustable ride height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the Wild 1 Adjustable Lowering Kit do?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt provides adjustable lowering for custom ride height control, letting you set the stance of your motorcycle to a personalized profile.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included with the kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes all necessary mounting hardware for a complete installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs professional installation required?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eProfessional installation by a certified mechanic is recommended to keep suspension geometry correctly maintained and components installed safely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the Wild 1 Adjustable Lowering Kit do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It provides adjustable lowering for custom ride height control, letting you set the stance of your motorcycle to a personalized profile.\"}}, {\"@type\": \"Question\", \"name\": \"What is included with the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes all necessary mounting hardware for a complete installation.\"}}, {\"@type\": \"Question\", \"name\": \"Is professional installation required?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Professional installation by a certified mechanic is recommended to keep suspension geometry correctly maintained and components installed safely.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Wild 1","offers":[{"title":"Default Title","offer_id":53035477237871,"sku":"830-0200","price":114.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_f56b7d36-d08a-421b-923d-58888363be59.png?v=1779561875"},{"product_id":"arnott-fox-series-softail-air-suspension-shocks-fox-series-blk-2001-2017-soft-850-01090","title":"Arnott FOX Series Black Air Suspension System - Harley Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Arnott FOX Series Black Air Suspension System is a complete air ride kit built around a FOX shock absorber and Arnott's TruAIR technology, using a rugged air spring bladder to give riders adjustable ride height and firmness. An integrated ViAIR high-output compressor handles inflation, and a handlebar-mounted switch lets you change settings on the go without stopping.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this system to move away from a static ride height. Quick adjustment makes it practical to set the bike for a solo ride, a two-up trip, or a load of gear, then change it again when the road or conditions call for something different. The fully enclosed Goodyear air spring sleeve protects the bladder, and the black anodized compressor cover keeps the setup looking clean and stealthy.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit includes the air spring, FOX shock absorber, ViAIR compressor with its application-specific bracket, and the handlebar inflation switch. All mounting hardware is provided for a straightforward installation. The system is designed and made in the USA.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Arnott\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MC-2908\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock:\u003c\/strong\u003e FOX shock absorber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Spring:\u003c\/strong\u003e TruAIR bladder with Goodyear sleeve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e ViAIR high-output, black anodized cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Handlebar-mounted switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade In:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included with this air suspension system?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe system includes the TruAIR air spring, FOX shock absorber, integrated ViAIR high-output compressor with its bracket, handlebar-mounted switch, and all mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow is the ride height adjusted?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eA handlebar-mounted switch controls the ViAIR compressor, letting you adjust ride height and stiffness on the fly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs the air spring protected?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the air spring is fully enclosed in a Goodyear air spring sleeve for added durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included with this air suspension system?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The system includes the TruAIR air spring, FOX shock absorber, integrated ViAIR high-output compressor with its bracket, handlebar-mounted switch, and all mounting hardware.\"}}, {\"@type\": \"Question\", \"name\": \"How is the ride height adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A handlebar-mounted switch controls the ViAIR compressor, letting you adjust ride height and stiffness on the fly.\"}}, {\"@type\": \"Question\", \"name\": \"Is the air spring protected?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the air spring is fully enclosed in a Goodyear air spring sleeve for added durability.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":53035623710831,"sku":"850-01090","price":1736.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_941f4823-1002-4d88-a3a4-6e593827f77e.png?v=1779562756"},{"product_id":"arnott-fox-series-softail-air-suspension-shocks-fox-series-chr-2001-2017-soft-850-01091","title":"Arnott Fox Series Chrome Air Suspension Shocks - Harley Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Arnott Fox Series Chrome Air Suspension Shocks bring adjustable ride height and a tunable ride to your Harley-Davidson V-twin. The system pairs TruAIR technology, which uses a Goodyear air spring bladder, with a FOX shock absorber for damping that is built to absorb bumps and rough pavement with control.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit to dial in their bike's stance and comfort. Ride height can be adjusted for a custom look and improved clearance, and the handlebar-mounted switch lets you change it on the fly without stopping. A ViAIR high-output compressor handles inflation, so adjustments take only moments whether you are cruising a long highway or riding a winding road.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit includes the ViAIR compressor with its mounting bracket, the TruAIR air spring with its enclosed Goodyear bladder, the FOX shock, the handlebar inflation switch, and the hardware needed for installation. Everything is packaged together so the upgrade arrives as one complete system.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Arnott\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MC-2909\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShock Absorber:\u003c\/strong\u003e FOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Spring:\u003c\/strong\u003e TruAIR with Goodyear bladder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e ViAIR high-output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide Height Control:\u003c\/strong\u003e Handlebar-mounted switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is included in the kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes the ViAIR high-output compressor with its mounting bracket, the TruAIR air spring, the FOX shock absorber, the handlebar-mounted inflation switch, and all necessary hardware for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow is the ride height adjusted?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eRide height is controlled with a handlebar-mounted switch that runs the ViAIR compressor, so you can change the stance while riding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat type of air spring does the system use?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe system uses TruAIR technology with a fully enclosed Goodyear air spring bladder.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes the ViAIR high-output compressor with its mounting bracket, the TruAIR air spring, the FOX shock absorber, the handlebar-mounted inflation switch, and all necessary hardware for installation.\"}}, {\"@type\": \"Question\", \"name\": \"How is the ride height adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Ride height is controlled with a handlebar-mounted switch that runs the ViAIR compressor, so you can change the stance while riding.\"}}, {\"@type\": \"Question\", \"name\": \"What type of air spring does the system use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The system uses TruAIR technology with a fully enclosed Goodyear air spring bladder.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":53035623743599,"sku":"850-01091","price":1736.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_300dba9f-5223-416e-9175-03bc4c94b607.png?v=1779563030"},{"product_id":"colony-machine-fork-stem-cap-fxst-fxwg-1980-2007-830-1129","title":"Colony Machine Chrome Fork Stem Cap - Harley FXST\/FXWG 1980-2007","description":"\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Colony Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier description:\u003c\/strong\u003e CHROME FORK STEM CAP FXST\/FXWG 80-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 2058-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States of America\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm fitment for your bike in the Fitment tab before ordering.\u003c\/p\u003e","brand":"Colony Machine","offers":[{"title":"Default Title","offer_id":53035713593455,"sku":"830-1129","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_601fd980-c3a5-4d8a-af14-44079a256496.png?v=1779562891"},{"product_id":"colony-machine-upper-fork-bearing-adjustment-kit-adj-kit-fxst-1984-2009-fxdwg-830-1168","title":"Colony Machine Upper Fork Bearing Adjustment Kit - Cadmium-Plated Harley Softail \u0026 Dyna Wide Glide","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Colony Machine Upper Fork Bearing Adjustment Kit is a reproduction of the original OEM component, designed for setting the preload on your upper fork bearings. It is made from cadmium-plated steel, which provides durability and corrosion resistance for long-term use at the front end of your motorcycle.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this kit to maintain precise steering and front-end stability. Fork bearing components can wear or become misadjusted over time, leading to vague steering or instability. Correct bearing preload helps eliminate play in the steering head, giving you a more predictable feel through the handlebars.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThis kit is well suited for riders restoring a classic or performing front-end maintenance. Properly adjusting the upper fork bearings supports responsive handling and a safer, more enjoyable ride.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Colony Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 2799-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cadmium-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.095 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Upper fork bearing adjustment kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is this kit used for?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt provides the components needed to set the preload on your upper fork bearings, helping eliminate play in the steering head.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat material is the kit made from?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit is made from cadmium-plated steel, which is used for durability and corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs this a reproduction of an original part?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the kit is a reproduction of the original OEM component.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is this kit used for?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It provides the components needed to set the preload on your upper fork bearings, helping eliminate play in the steering head.\"}}, {\"@type\": \"Question\", \"name\": \"What material is the kit made from?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit is made from cadmium-plated steel, which is used for durability and corrosion resistance.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a reproduction of an original part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the kit is a reproduction of the original OEM component.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Colony Machine","offers":[{"title":"Default Title","offer_id":53035716903023,"sku":"830-1168","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_0e7269d5-6e0a-458f-92a1-0ecb0905a212.png?v=1779562903"},{"product_id":"colony-machine-fork-stem-cap-flst-fxr-fxd-xl-86-up-830-1201","title":"Colony Machine Fork Stem Cap - Harley Softail, FXR, Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Colony Machine Fork Stem Cap is a direct replacement for the factory fork stem cap on V-twin Harley-Davidson motorcycles. It is a small fastener, but it has an important job: securing the fork stem and headset assembly so the front end stays put and the steering stays predictable.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this cap when replacing worn or missing hardware, or when handling routine front-end maintenance. Keeping the fork stem and headset assembly secure helps maintain proper steering geometry and front-end stability, which translates into more rider confidence on the road.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eColony Machine designed this cap as a straightforward component with a clear purpose. Replacing worn or missing hardware with a quality Colony Machine fastener is a simple way to keep your steering tight and responsive.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Colony Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 9977-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.0625 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Direct replacement fork stem cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the fork stem cap do?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt secures the fork stem and headset assembly, helping maintain proper steering geometry and front-end stability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs this a direct replacement for the factory part?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, it is designed as a direct replacement for the factory fork stem cap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow much does this part weigh?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe Colony Machine Fork Stem Cap weighs 0.0625 lbs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the fork stem cap do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It secures the fork stem and headset assembly, helping maintain proper steering geometry and front-end stability.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a direct replacement for the factory part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, it is designed as a direct replacement for the factory fork stem cap.\"}}, {\"@type\": \"Question\", \"name\": \"How much does this part weigh?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Colony Machine Fork Stem Cap weighs 0.0625 lbs.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Colony Machine","offers":[{"title":"Default Title","offer_id":53035722539119,"sku":"830-1201","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/4808-5cdf11bbaf499.jpg?v=1777529210"},{"product_id":"colony-machine-fork-stem-bolt-flst-fxr-fxd-xl-86-up-830-1202","title":"Colony Machine Fork Stem Bolt - Harley Softail, FXR, Dyna, Sportster","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Colony Machine 9978-2 fork stem bolt is a replacement fastener for the steering connection between the fork and frame on a V-twin motorcycle. It is an OEM-specification direct replacement, built to the same standards as the factory original, and it secures the fork-to-frame steering connection to help maintain front-end stability.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose this bolt when rebuilding a front end or replacing worn hardware. Because steering integrity depends on this connection, a dependable fastener matters, and this part is made to hold the steering assembly securely in place. It weighs 0.34 lbs.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eInstallation should always follow the manufacturer's torque specifications for safe, reliable performance. Whether you are doing a full front-end overhaul or simply swapping out a worn bolt, this part gives you a direct replacement that restores the original steering connection.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Colony Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 9978-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Fork stem bolt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Fork-to-frame steering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat does the Colony Machine 9978-2 fork stem bolt do?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt secures the fork-to-frame steering connection and helps maintain front-end stability. It is an OEM-specification direct replacement for the stock bolt.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs this bolt a direct replacement for the stock part?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, it is described as an OEM-specification direct replacement for the stock fork stem bolt.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat should I do before installing this bolt?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eAlways torque the bolt to the manufacturer's specifications for optimal safety and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the Colony Machine 9978-2 fork stem bolt do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It secures the fork-to-frame steering connection and helps maintain front-end stability. It is an OEM-specification direct replacement for the stock bolt.\"}}, {\"@type\": \"Question\", \"name\": \"Is this bolt a direct replacement for the stock part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, it is described as an OEM-specification direct replacement for the stock fork stem bolt.\"}}, {\"@type\": \"Question\", \"name\": \"What should I do before installing this bolt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Always torque the bolt to the manufacturer's specifications for optimal safety and performance.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Colony Machine","offers":[{"title":"Default Title","offer_id":53035723325551,"sku":"830-1202","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/ef4a-5cdf11d377e29.jpg?v=1777529211"},{"product_id":"harddrive-fork-tube-tubes-22-7-8-std-flst-820-52346","title":"Harddrive 22-7\/8\" Standard Length Hard Chrome Fork Tube - Harley Softail","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHard Chrome fork tubes and assemblies (sold in pairs)\u003c\/li\u003e\n\u003cli\u003eAvailable with or without internals (damper, springs and caps)\u003c\/li\u003e\n\u003cli\u003eLengths listed for OE reference, may not be exact OEM replacement, depending on model and year\u003c\/li\u003e\n\u003cli\u003eLengths listed are overall lengths (not including damper rod in assemblies)\u003c\/li\u003e\n\u003cli\u003ePlease measure your tubes before ordering to ensure correct length is ordered\u003c\/li\u003e\n\u003cli\u003e**NOTE: 2017-2020 FLT tubes will have the 46080-01 Lower Bushing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier description:\u003c\/strong\u003e 41MM FORK TUBES 22-7\/8\" STD FLST\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e 094188\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 191361167324\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.32 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e China (Taiwan)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm fitment for your bike in the Fitment tab before ordering.\u003c\/p\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035728339055,"sku":"820-52346","price":253.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/ad84-5a3d5fcce8501.jpg?v=1777529219"},{"product_id":"harddrive-fork-tube-assembly-22-7-8-std-flst-820-52347","title":"Harddrive 22-7\/8\" Standard Hard Chrome Fork Tube Assembly - Harley Softail","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Harddrive 22-7\/8\" Standard Hard Chrome Fork Tube Assembly is a pair of replacement front fork tubes with a hard chrome finish. Sold as a pair, they are intended to keep both sides of the front end matched, which helps the suspension work evenly under load.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose replacement fork tubes like these to restore the ride quality of a worn or damaged front end. The hard chrome finish is built to protect the tube surface, helping it stand up to road debris, moisture, and everyday wear over time.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThis assembly is listed at a standard 22-7\/8 inch overall tube length. Lengths on this type of part may not match original equipment length exactly, depending on the application, so measure your existing tubes before ordering to confirm the correct length. The product is listed as 15.26 lbs and carries manufacturer part number 094155.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Harddrive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 094155\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Length:\u003c\/strong\u003e 22-7\/8 inch (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.26 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat finish does this fork tube assembly have?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt has a hard chrome finish, which is listed as providing protection for the tube surface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eIs this sold individually or as a pair?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eIt is sold as a pair, so you get two tubes for a balanced front end.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eShould I measure my tubes before ordering?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes. The listed 22-7\/8 inch length is an overall length and may not match original equipment exactly, so measuring your existing tubes first is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What finish does this fork tube assembly have?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It has a hard chrome finish, which is listed as providing protection for the tube surface.\"}}, {\"@type\": \"Question\", \"name\": \"Is this sold individually or as a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is sold as a pair, so you get two tubes for a balanced front end.\"}}, {\"@type\": \"Question\", \"name\": \"Should I measure my tubes before ordering?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The listed 22-7\/8 inch length is an overall length and may not match original equipment exactly, so measuring your existing tubes first is recommended.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Harddrive","offers":[{"title":"Default Title","offer_id":53035728404591,"sku":"820-52347","price":578.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/6316-5a3d5fdb59c77.jpg?v=1777529219"},{"product_id":"arnott-m8-softail-air-suspension-shocks-ultimate-ride-blk-m8-softail-850-01070","title":"Arnott Ultimate Ride Air Suspension Shocks Black - Harley Milwaukee-Eight Softail","description":"\u003cp\u003eArnott engineers improved the new Softail's rear suspension by designing a fully adjustable FOX ® mono shock and air spring that can be controlled with an on-board compressor and inflation switch, providing exceptional ride quality, confident control while stopped and enhanced safety.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArnott’s Air Shock provides the rider with superior control, ride comfort, and much greater height adjustability\u003c\/li\u003e\n\u003cli\u003eKit Includes everything needed to install\u003c\/li\u003e\n\u003cli\u003e1 Black shock absorber\u003c\/li\u003e\n\u003cli\u003eViAIR compressor w\/application-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eBlack handlebar-mounted inflation switch\u003c\/li\u003e\n\u003cli\u003eAir distribution valve\u003c\/li\u003e\n\u003cli\u003eFused wiring harness \u0026amp; relay assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eNylon air line tubing\u003c\/li\u003e\n\u003cli\u003eCable ties\u003c\/li\u003e\n\u003cli\u003eDetailed installation manual\u003c\/li\u003e\n\u003cli\u003eMade \u0026amp; tested in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Arnott\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier description:\u003c\/strong\u003e AIR SHOCKS ULTIMATE RIDE BLK M8 SOFTAIL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part #:\u003c\/strong\u003e MC-3585\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 815710021524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.70 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States of America\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm fitment for your bike in the Fitment tab before ordering.\u003c\/p\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":53035813699695,"sku":"850-01070","price":1428.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/257f-5a84b770139c7.jpg?v=1777529433"},{"product_id":"fox-ifp-shocks-for-hd-touring-models-12-inch-897-27300","title":"FOX IFP 12 Inch Rear Shocks - Harley Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe FOX IFP 12 Inch Rear Shocks are gas-charged mono-tube units built to improve ride quality and control. Each shock uses an internal floating piston design intended to keep damping consistent as road conditions change.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eRiders choose these shocks for their damping consistency and tuning options. The internal floating piston is designed to prevent oil cavitation and fade, and the hand-adjustable spring preload makes it quick to set the shock for your weight and load. Three spring rate options (standard, heavy duty, and super heavy duty) let you match the shock to your riding style and load.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe body is 6061-T6 aluminum with Type III hard anodizing, and the construction is fully serviceable and rebuildable for long-term use. The shock weighs 9 lbs and carries manufacturer part number 897-27-100.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e FOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 897-27-100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 12 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Type III hard anodizing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate Options:\u003c\/strong\u003e Standard, heavy duty, super heavy duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat type of shock is this?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese are gas-charged mono-tube shocks with an internal floating piston designed to keep damping consistent.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow is the spring preload adjusted?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe spring preload is hand-adjustable, so you can tune it quickly to your weight and load without tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre these shocks serviceable?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the shocks are fully serviceable and rebuildable for long-term performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What type of shock is this?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These are gas-charged mono-tube shocks with an internal floating piston designed to keep damping consistent.\"}}, {\"@type\": \"Question\", \"name\": \"How is the spring preload adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The spring preload is hand-adjustable, so you can tune it quickly to your weight and load without tools.\"}}, {\"@type\": \"Question\", \"name\": \"Are these shocks serviceable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the shocks are fully serviceable and rebuildable for long-term performance.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"FOX","offers":[{"title":"Default Title","offer_id":53035823202415,"sku":"897-27300","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/25b0-61eaed4a9997f.png?v=1777529522"},{"product_id":"fox-ifp-shocks-for-hd-touring-models-12-inch-heavy-duty-897-27301","title":"FOX IFP 12-Inch Heavy Duty Rear Shocks - Harley Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eFOX IFP 12-inch heavy-duty rear shocks are built for riders who carry extra weight and want consistent control on the road. The gas-charged monotube design uses an internal floating piston to separate the nitrogen gas from the shock oil, which helps maintain damping performance during aggressive riding or long rides.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eVelocity-sensitive damping with a high-flow, deflective disk gives precise control over bumps and road changes. The hand-adjustable spring preload lets you dial in your preferred ride height and firmness, and the heavy-duty spring rate is designed for riders over 240 lbs.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe body is made from durable 1.5-inch 6061-T6 aluminum with a Type III hard anodized finish. The 1\/2-inch low-friction chrome shaft is super-finished to reduce stiction for a smoother, more responsive ride. These shocks are fully serviceable and rebuildable, so they can be maintained for long-term value.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e FOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 897-27-101\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Type III hard anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 1\/2-inch low-friction chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter:\u003c\/strong\u003e 1.5-inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServiceable:\u003c\/strong\u003e Yes, fully rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat type of shock design do these use?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThey use a gas-charged monotube design with an internal floating piston that separates the nitrogen gas from the shock oil for consistent damping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan I adjust the ride?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the spring preload is hand-adjustable so you can tune the ride to your preference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre these serviceable?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, these shocks are fully serviceable and rebuildable for lasting performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What type of shock design do these use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They use a gas-charged monotube design with an internal floating piston that separates the nitrogen gas from the shock oil for consistent damping.\"}}, {\"@type\": \"Question\", \"name\": \"Can I adjust the ride?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the spring preload is hand-adjustable so you can tune the ride to your preference.\"}}, {\"@type\": \"Question\", \"name\": \"Are these serviceable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, these shocks are fully serviceable and rebuildable for lasting performance.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"FOX","offers":[{"title":"Default Title","offer_id":53035823267951,"sku":"897-27301","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/25b0-5b806346948af.png?v=1777529522"},{"product_id":"fox-ifp-shocks-for-hd-touring-models-13-inch-897-27302","title":"FOX IFP 13-Inch Rear Shocks - Harley Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe FOX IFP 13-inch rear shocks are a suspension upgrade for riders who want a more controlled, planted ride from their bike. Built as a gas-charged monotube with an internal floating piston, the design separates the nitrogen gas from the shock oil, which helps prevent aeration and keeps damping consistent over longer rides.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eVelocity-sensitive damping responds to how quickly the suspension moves, giving a responsive feel over a range of road surfaces. The 1.5-inch body is made from 6061-T6 aluminum with a hard-anodized finish, and a hand-adjustable spring preload lets you fine-tune the setup. The low-friction 1\/2-inch hard-chrome shaft is finished for smooth travel.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eSpring rates are available in standard, heavy-duty, or super-duty options so you can match the shock to your rider weight and load. The shocks are fully serviceable and rebuildable, which makes them a practical long-term choice for riders who ride a lot or carry gear.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e FOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 897-27-102\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e 6061-T6 aluminum, hard-anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 1\/2-inch hard-chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping:\u003c\/strong\u003e Velocity-sensitive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Preload:\u003c\/strong\u003e Hand-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rates:\u003c\/strong\u003e Standard, heavy-duty, super-duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat type of shock is this?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese are gas-charged monotube shocks with an internal floating piston, which helps maintain consistent damping. The design is also fully serviceable and rebuildable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan I adjust the spring preload?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the spring preload is hand-adjustable so you can fine-tune the ride to your preference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat spring rates are available?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eSpring rates are offered in standard, heavy-duty, and super-duty options to match different rider weights and loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What type of shock is this?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These are gas-charged monotube shocks with an internal floating piston, which helps maintain consistent damping. The design is also fully serviceable and rebuildable.\"}}, {\"@type\": \"Question\", \"name\": \"Can I adjust the spring preload?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the spring preload is hand-adjustable so you can fine-tune the ride to your preference.\"}}, {\"@type\": \"Question\", \"name\": \"What spring rates are available?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Spring rates are offered in standard, heavy-duty, and super-duty options to match different rider weights and loads.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"FOX","offers":[{"title":"Default Title","offer_id":53035823300719,"sku":"897-27302","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/25b0-5b806346948af_05de432e-8317-43d9-a6f7-7b5d4240fe0d.png?v=1777529522"},{"product_id":"fox-ifp-shocks-for-hd-touring-models-13-inch-heavy-duty-897-27303","title":"FOX IFP 13-Inch Heavy Duty Rear Shocks - Harley Touring","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe FOX IFP 13-inch Heavy Duty Rear Shocks are built for riders who carry significant weight and want more control from their rear suspension. Each shock uses a gas-charged monotube design with an internal floating piston, which separates the nitrogen gas from the shock oil to help prevent aeration and keep damping consistent across the stroke.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eVelocity-sensitive damping responds to the speed of suspension movement, giving a more controlled ride over varied road surfaces. A hand-adjustable spring preload lets you dial in the setup for your riding style and load, and the heavy-duty spring rate is specifically designed for riders 240+ lbs. The 1\/2-inch hard chrome shaft has a low-friction super finish to reduce stiction and improve responsiveness.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe body is 6061-T6 aluminum with a Type III hard anodized finish, and the shocks are fully serviceable and rebuildable, so they can be maintained over the long haul. Whether you ride two-up with luggage or simply prefer a firmer feel, these FOX shocks are made to handle the load.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e FOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 897-27-103\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 13 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material:\u003c\/strong\u003e 6061-T6 aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Type III hard anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 1\/2-inch hard chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Diameter:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRider Weight Rating:\u003c\/strong\u003e 240+ lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat type of shock is this?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThese are gas-charged monotube shocks with an internal floating piston and velocity-sensitive damping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eCan the spring preload be adjusted?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, the spring preload is hand-adjustable so you can personalize the setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eAre these shocks serviceable?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eYes, they are fully serviceable and rebuildable for long-term use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What type of shock is this?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"These are gas-charged monotube shocks with an internal floating piston and velocity-sensitive damping.\"}}, {\"@type\": \"Question\", \"name\": \"Can the spring preload be adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the spring preload is hand-adjustable so you can personalize the setup.\"}}, {\"@type\": \"Question\", \"name\": \"Are these shocks serviceable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, they are fully serviceable and rebuildable for long-term use.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"FOX","offers":[{"title":"Default Title","offer_id":53035823333487,"sku":"897-27303","price":899.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/25b0-5b806346948af_624deb41-7c95-4aca-802e-6d4f28ca3b4f.png?v=1777529523"},{"product_id":"arnott-smooth-ride-shock-can-black-850-2021","title":"Arnott Smooth Ride Air Suspension Kit - Black - Harley Touring, Softail \u0026 Dyna","description":"\u003c!-- vt:seo-start --\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe Arnott Smooth Ride Air Suspension Kit is a complete air suspension system for V-twin motorcycles. It uses black shock absorbers with Goodyear air springs and a ViAIR high-output compressor so riders can adjust ride height on demand, lowering the bike over 3 inches at a stop for easier flat-footed parking and better maneuvering.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eAdjustment is handled by an onboard toggle switch, so you can move between a lowered stance for stops and a comfortable ride at speed. The black finish gives the shocks a stealthy look. The system includes an air distribution valve with a speed control muffler for precise adjustments, along with the complete wiring harness, relay, fused assembly, and all mounting hardware.\u003c\/p\u003e\n\u003cp style=\"line-height:1.65;\"\u003eThe kit is a complete solution rather than a pair of shocks alone. It is designed to adjust your ride height for different riding conditions, from cruising to twisty roads, and it is a practical upgrade for Harley-Davidson riders who want more comfort and control.\u003c\/p\u003e\n\u003ch3 style=\"margin:20px 0 6px;\"\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Arnott\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e K-3260\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRide Height Adjustment:\u003c\/strong\u003e Over 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e ViAIR high-output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Complete kit with all installation hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.75 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"margin:22px 0 8px;\"\u003eCommon questions\u003c\/h3\u003e\u003cdiv class=\"vt-faq\"\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eHow is the ride height adjusted?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eAn onboard toggle switch lets you adjust ride height, with over 3 inches of adjustable travel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat comes with the kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe kit includes dual black shock absorbers with Goodyear multi-ply air spring sleeves, a high-output ViAIR compressor with mounting bracket, an air distribution valve with speed control muffler, a wiring harness, relay, fused assembly, and all mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin:0 0 12px;\"\u003e\n\u003cp style=\"margin:0 0 3px;font-weight:600;\"\u003eWhat is the finish and weight of the kit?\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.6;\"\u003eThe shock absorbers have a black finish, and the kit weighs 16.75 lbs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How is the ride height adjusted?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"An onboard toggle switch lets you adjust ride height, with over 3 inches of adjustable travel.\"}}, {\"@type\": \"Question\", \"name\": \"What comes with the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes dual black shock absorbers with Goodyear multi-ply air spring sleeves, a high-output ViAIR compressor with mounting bracket, an air distribution valve with speed control muffler, a wiring harness, relay, fused assembly, and all mounting hardware.\"}}, {\"@type\": \"Question\", \"name\": \"What is the finish and weight of the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The shock absorbers have a black finish, and the kit weighs 16.75 lbs.\"}}]}\u003c\/script\u003e\n\u003c!-- vt:seo-end --\u003e","brand":"Arnott","offers":[{"title":"Default Title","offer_id":53035824578671,"sku":"850-2021","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/6734\/6543\/files\/output_29122932-dd03-4a52-a33a-2cd5d0b93589.png?v=1779563213"}],"url":"https:\/\/vtwinbikers.com\/en-co\/collections\/softail-suspension.oembed?page=2","provider":"VTWIN BIKERS","version":"1.0","type":"link"}