All Balls Fork/Dust Seal Wiper Kit - Harley-Davidson Sportster

Only bearings I ever use. And I change them every time I change tires. Might be overkill but if you have ever had a wheel bearing go out at speed you would understand

No seals included as pictured

No seals included as pictured.

didn't install MADE In CHINA

Missing Parts

This picture is what I ordered. What I got was only the bearings. So I had to get the seals at a dealership near me.

wheel bearings

easy install ,good quality and always delivers when you buy the All Balls products .Never an issue.

I don't know what is actually going on but I ordered this product and received only one bearing. I called and you sent me another bearing but in the book it shows 2 bearings in this kit. I did get the other bearing for nothing but the description for this item needs to be more clear.

All Balls all the time.

Perfect fit

All Balls all the time.

Perfect fit

Caja de bolas

Nice,fit really good,good material

Great Bearings

You can’t go wrong with All Balls bearings. Quality products honestly. I always use them and to date, I’ve always had good luck.

Works good

Swapped into a wheel that was off a 19 SG with abs to put on my 08 SG without abs. Worked perfectly as long as you have the nice bearing install kit!

Good

Good quality for money, purchased front and rear

so far good

Don't know long term but stock Harley are crap

great fit

right size went right in saved my ass

So far so good

Perfect fit on 2012 FXDF. Bike now rolls smoth and backs up easy. 200+ miles on them no complaints.

Richie Eich

Had some trouble with fitting in one of the bearing but that was on me. Bearings work as advertised would buy them again unless they have higher quality bearings available

All Balls Indeed! Slightly less expensive than the Stealership and possibly better. Correct size and fit. Done about 5K on the new ones and so far, pleased. Recommend.

Their bearings, what else can I say. Seem like quality bearings.

Good product easy installation works well. Happy camper!

Product seems of top quality ,fast shipping.

I guess I got over 12 thousand miles on these bearings. They seem to be working fine.

Good bearings

Fit perfectly worked as advertised only problem is when I spoke to someone at J and P they told me these were shipped in singles when they arrived there was two per package

Great price for the bearings... smooth out side the wheel. Decent quality packaging and came with a sticker. Last pack I got from Utah HD with the crush tube and those are good but install was a bit shaky. If these get installed by the shop I'll update...6/2022.

Excellent bearings at a good price. I change them every time I change my tires.

Great price for this and quicker shipping than expected

Fit my 07 Fatboy perfect

good for the money

Looking forward to many enjoyable miles!

Should be made clearer that pic shown is for2 bearings for one front wheel

All is good.<br />Minor mix up (Ordered 2 sets received 1 set and 1 single) but 1 phone call and it was remedied.<br />Thank You !!

BEARINGS WORKING FINE SO FAR.

Haven't used this yet. Waiting for bearing puller. But this comes only one to a package. this is the only complaint right now.

GOOD QUALITY BUT THE PICTURE<br />HAS 2 BEARINGS, BUT THE KIT CONSISTS ONLY OF 1 BEARING. THAT IS CONFUSING.

5 stars only because i know the quality of ALL BALLS is good and i try to use them on all my bikes. that being said unfortunately i could not use the bearings because i only ordered 2 "kits" , which i thought would be the right quantity of bearings to do front and rear on my bike. This bearing "kit" only includes 1 bearing. You need 4 "kits" to do a complete wheel bearing job. Note for 2008 Harley owners...these bearings do not work on the center rear bearing..<br /><br />I ended up grabbing bearings from the HD dealership local to me.

Never have any issues. Everything has a life span so i dont worry much

After confirming that these were the right bearings through a chat with one of their experts, I tore the bike down to do the work and found they were the wrong size. Waiting on the refund still.

Super fast shipping!

They fit and worked perfect

So far with only a few hundred miles on the bearings -on a 2009 FLHX - they're good.

Great price and fast service. The bearings fit perfect and great quality, Just what I wanted.

Used before of other bikes. Never had to replace twice.

Great bearings, quick shipping as always!

I installed a set on my rear Fatboy wheel and they were a perfect fit. After they went in I ordered a set for my front wheel also.

Quick shipping, exact fit on my 08 fatboy rear wheel. Also ordered some for my front wheel.

They're great new pork like you're supposed to

Fit perfect, rides smooth, very happy

Great product<br />That fits my 2008 HD road king classic

Exactly as described for replacement for rear wheel bearings. Fit Perfectly but still needs miles to prove out.

No problems

1/4 the price of factory bearings. Use the all balls brand in my buells as well. No issues as of yet with them either.

HIGH QUALITY...... perfect fitment and very reasonable price!

Got it right away

So far so good, easy installation, smooth ride

Works as intended, Maybe a better after market product...TBD? Removed older ones with proper installation and reinstall tools.

Fast shipping. Right parts

Great product and super fast shipping

As described, installed well. Ran the 12 continuous hours today at highway speeds except for refuels with no problems. Very pleased, even the price was right!

Good product, should serve a season or two.

Great price

Great bearings. About to order 2 more for shop spares.

Was surprised to see “made in China” on the package. I was under the impression that All Balls bearings were made in the USA. Only time will tell if they are better than stock Harley.

These parts were put on in road today worked very well Michelin worked as well with their rebates stiffed me on rebate

Top Notch!

4 Stars

Have never had a bad product from All Balls very good price

Great product. All balls is the way to go!!

5 Stars

You cant beat the price, and allballs bearing come highly recommended!

5 Stars

Excellent product, fast shipping, great seller selection of products

Good job. Thanks

Good bearing and reasonably priced.

5 Stars

Best wheel bearings I have ever used. They really don't seem to mind getting slapped around with 125 horsepower.

Ordering set for rear now. Only difference between these and "Harley" bearings is the price (more than double) and the seal has a part number instead of saying "Harley Davidson".

Bearings were properly lubricated, I verified this by removing the dirt shields and checking.<br /><br />Working great so far.

4 Stars

5 Stars

I have only had the bearings in for a week only time will tell if they will last as long as the factory ones.The factory ones only lasted 30k miles.The picture for this bearing shows 1" on the sheild so it gave me the impression that I ordered the wrong bearings when in fact they were 25mm

Have the same black seal that the HD ones do. Hopefully I installed them correctly. Made it 50 miles so far.

5 Stars

Good price. Check with every tire change

Always a good choice

Very good ball-bearings they are very good quality, they fit my 2008 Dyna super glide, recommend to all my fellow riders, ride safe...

Got around 2000 miles on them before the front wheel started grinding and squealing. Rears are still holding up ok.

Grabbed a set of these for my 09 Electra Glide...right bearing lasted only a few months (daily rider) and the seal broke and started grinding, no wonder they're only 11 bucks..gave them 1 star because the left side is still ok amazingly...stay away from these.

have not used yet but have used all balls products before with no problems

Great price and they make the wheels spin good.

I've ordered this bearing set several times, for multiple bikes, and they have been great. I think they are a much better product than what Harley puts in their bikes from the factory.

Perfect fit. Looks quality.

They look like they're well made, just hope that they last close to the amount of miles that I got from the original bearings did.

A good fit but after about 2,000 miles one is vibrating and leaking.

I bought these when my stock HD bearings left me on the side of I-75 in south Florida. 2 bearings come in the kit so if you plan on doing both wheels you only to by 2 not 4. Installation was easy enough but now I get a funny hum from the front end when I'm leaning in either direction. Going to re-torque the wheel and see if it goes away.

Bike: 2011 FLHTCU; purchased these for a wheel swap on my ultra, these bearings are smooth like butter, installed like stock and work great!

Quality parts at a great price.

I had heard good things about these bearings, so I thought I would give a try. <br />Well, after only 3,000 , they started making lots of noise.<br />I replaced them with the same bearings because I had purchased 4 sets.<br />We'll see how long these last.

perfect

Excellent Quality

Excellent quality for low price

Price right. Went in hub right. Hope they last me miles and miles.

Perfect fit, no worries about Harley bearings seizing now...

they were great

Great bearings wish i had bought them before

This is the bearing Harley should use in the first place. Maybe I wouldn't have to change rear wheel bearings after 8000 miles if they did.

I’ve got nothing bad to say about the All Balls wheel bearings. They had great reviews so I tried them out. I'll have to wait until they have some miles on them to see how they hold up. I personally like the blue seals on the sealed bearings…it may not be for some though.